Great info! I have see these aspects used elsewhere but now I know why.
@fishheadtackle3 ай бұрын
Glad it was helpful!
@davidjenbrown3 ай бұрын
Love these videos thanks for posting
@fishheadtackle3 ай бұрын
Glad you like them!
@gnike91033 ай бұрын
Informative as always, looking to get a Zenaq Muthos Sonio 93M RG
@fishheadtackle3 ай бұрын
Thanks! we will be happy to help you out when you decide to pull the trigger fishhead.com.au/zenaq-defi-muthos-sonio-93m-rg-shore-casting-rod/
@rajakingsss48045 күн бұрын
I am leaving India How to contact in your shop I want janckopping Road
@Gamgam4843n2 ай бұрын
Does it really make enough difference over the k guide eapecially if running thicker leaders?
@fishheadtackleАй бұрын
Hi, Each of the benefits of the RG system listed in the video have a small effect on their own, but when you add them all up as a whole package, then yes it is a very nice performance boost all round. For heavier leaders it does depend on how heavy and which of the RG guide trains you are looking at - as there are light, medium and heavy versions. On the lightest rods (Snipe and Plaisir answer series, PE 1-2 rods) I've found leaders under 25lb work best on the small guides used. People wanting to run 40-50lb leaders through the guides on these light model rods may struggle. Zenaq is going to start running a new 'RG10' guide train on upcoming medium/light (PE2-3) rods which will address this. In the medium and heavy RG systems on larger rods it has not really been an issue. At the other end of the spectrum, Zenaq does not offer RG system on heavy tackle PE8-10 GT/tuna rods and Accura HHH shore casting rod, as they don't believe there are as much benefits to be had there compared to the heavy duty MNSG set up. Even so, these non RG rods still run more guides than many brands and the 'Assist Guide' placed close to the tip is starting to appear on these models too. Hope that helps Duncan
@livinfishn56363 ай бұрын
But usually the more guides you add to the blank the stiffer it becomes losing the action of the blank.
@fishheadtackle3 ай бұрын
That is what you would expect to happen, but it does not seem to be a significant difference with these rods. Zenaq makes several of their RG rods with a more conventional K guide build as well for those that prefer it that way. Possibly it is to do with the blank construction or the small neat binding of the guides, but it is really hard to tell the difference in stiffness between the two builds when flexing them side by side.
@rodmakermagazine7117Ай бұрын
No, as you add more guides the additional weight results in a softer rod, not a stiffer one. You can prove this to yourself by simply taping or wrapping guides, end to end, from one of the rod to the other. It will react and respond like a noodle.