Zipper Coil Build Vid

Рет қаралды 291,954

10 жыл бұрын

Spiral Wire Build Vid: • Spiral Wire Build Vid
Check these two out on instagram: @calboy1964 (gave me idea for this coil) @rottyskoots (invented pirelli coil, very similar to this coil)
Some mor

Пікірлер: 133

@nobreaksyakclub5234 10 жыл бұрын

You sir just blew my mind. I subscribed and am looking forward to more videos. I'll be cruising through your older ones all day today. Thanks for what you do.

@JustaGam3 9 жыл бұрын

The build is awesome and probably the easiest zipper coil tutorial I've seen. Had to use 30g cuz that's all I had small enough but still came out around .13 with 1 less wrap. Extreme vapor and most flavor I've gotten out of such a low build. Thank you sir and look forward to more builds from you

@orionx8295 6 жыл бұрын

Awesome....just Fucking awesome!!!! Still a classic FOUR YEARS LATER!!!!!........A TIMELESS DESIGN!!!!!!!

@gregcalica8885 9 жыл бұрын

i love this coil. my first crack at it isn't as beautiful as yours--kinda scraggly, but the plume is a dense pillow of soft, cool, flavor at 0.34 ohms, 3.41V and 34.5W. i didn't have any 28 gauge because i've been building your take on the tidal wire for a few months now, so i twisted together 5 strands of 32 guage for each spiral wire. i like this a lot better than the tidal wire, which needs a hotter burn in order to pull out the same cloud. i'm not a fan of the fruity juices, preferring the more bodied tobacco and creamy blends. so, for me, the way the zipper seemingly cooks out a more rounded and subdued flavor in comparison to the tidal wire that seems to provide a more sharper, crispier profile; complements my juices better.

@dougwatkins5441 9 жыл бұрын

you are the man when it comes too twisted wire builds thanks for the videos

@mitchclark5362 9 жыл бұрын

I want to thank you for helping me get second place in a vape competition with just a single coil of one of these bad boys

@razor3375 9 жыл бұрын

Love these seen on riptripper and had to do. Running in a mutation xl on a hades 26650 with the efest, 4 wraps each coil, duals by the way and I'm sittin at .08 ohms the vape is great and the taste is great. My favorite build by far and that's saying alot cause out of all my friends who vape I'm the one watch in all the videos and learning how to do all the coils and mess with mods and fix them when they break (come out of adjustment), but favorite build by far, just ordered parts to make my own box mod gonna run trip 26650s in parallel with this set up so I got life to go and can enjoy these guys without having to worry about my vape dying cause man does it drain it fast.

@surferdown1 10 жыл бұрын

That is an awesome build bro! I am going to try that build on my 28.5mm copper Plume Veil using 26 guage around 7/64 6 wrap duals. Thanks for the great tutorial.

@jelig72 9 жыл бұрын

Your coils makes mine look like a bad joke. I bet the flavor is poppin on all your builds.

@muffty1337 9 жыл бұрын

This is so awesome. You Sir, are a real artist. It blew my mind when i saw the beautiful even glow. :)

@JET-Photo 9 жыл бұрын

Finally tried it using this video as a reference. Now I see what all the fuss is about. Thanks for the tutorial!

@Krylovix 9 жыл бұрын

Well Rip Trippers brought me here! Enjoyed your video!

@drummer4hire12 9 жыл бұрын

You are a 'Twisted' artist ;) Darn good videos and very innovative works. Thanks for sharing!!!!

@Beef1121 10 жыл бұрын

Awesome work!!

@ryanbradley5459 10 жыл бұрын

I believe I did a new innovative single coil. Tiger wire that is 22 gauge then wrapped again with a ribbon wire .09. This build has much more flavor an more dense vapor production then a standard tiger wire. This build came out to a 0.10 ohms. Really want to share with the community.

@garnettgerlt4659 9 жыл бұрын

Thanks man had a lot of fun makin this one...

@jaekovkurosakai 9 жыл бұрын

A work of art.

@666Harleyman 10 жыл бұрын

WOW that coil looks awesome. I haven't done any twisted coil builds but after watching this vid I want to get the drill out. LOL I think the ohm meter is from sun vapers or something like that, they stopped there online sales of vape gear and i don't know if they still sell just the ohm meter. I have one just like it in clear plastic. New sub here after this build vid. keep'em up and i will look at your older vids for sure.

@Cyrus92178 10 жыл бұрын

Thanks for the build video!

@brandon_leeroy135 7 жыл бұрын

Still a great build in 2017

@VAPEFOGReviews 10 жыл бұрын

Awesome build man.

@slainable 9 жыл бұрын

You should try turning this coil into some sort of hybrid clapton.can only imagine the ramp-up time tho.

@epicgrimm8233 9 жыл бұрын

Ive watched your video along with RiP and Daily Vapes tut for this ... and im fairly confidant i can do it. i found some scrap pieces and practiced doing some of the steps before i went and used 6 ft of my kanthal :) will try to post response video of the build when i get to it! fun fact my father in law said hes going to "ban" clouds from the bar (our closed in porch that is set up like a bar) because it gets too foggy ... one ... i built all the coils that make the room foggy .. SCORE point 1! and also ... he use to set off our fog machine in this same room ... talk about 4000 watts! im going to remind him next time he fake coughs from all the "smoke" XD point 2! lol

@RPR-bh5kc 8 жыл бұрын

whats your fav set of coils so far? seen a bunch of your build vids keep up the good work bro

@Kloque1984 8 жыл бұрын

I just had an epiphany... We have been searching for lower and lower resistance wires to get hotter coils, more wraps, etc.. We need a wire with higher resistance than kanthal so we can build .1- .12 ohm 18 gauge builds and dual parallel 20 gauge builds.. This is where the clouds will come from.

@spyralspyder 9 жыл бұрын

It is a wonderful design

@TwistedTornsTirade 9 жыл бұрын

Man you sure do make this look easy, I am curious tho how do you make your coils stay the shape? My twisted coils seem to separate and you can see each individual wrap, know what I mean? Much thanks you rock bro

@Terranscapes 9 жыл бұрын

I was looking through your builds for the first to try, and this looks like it for me. :) Then it occurred to me that it might be nice if you gave each build a difficulty rating. Then viewers could work on easier ones first to build up. Perhaps it's too obvious - this is simpler than a fused Clapton which is easier than a stapled tiger for instance. But your personal take on easier vs difficult might be illuminating.

@aldionsylkaj9654 9 жыл бұрын

illuminating illuminatie

@epicgrimm8233 9 жыл бұрын

i second the difficulty rating! that would be nice that way some people who say are short on time can get to the video they want a bit easier :D

@Meta-Drew 10 жыл бұрын

You are awesome, please don't grow your chops out super long, become zany, and start adding tons of jump cuts

@TwistedMesses 10 жыл бұрын

So far I haven't seen the need for jump cuts lol. The hair though, no promises

@benwilliams9546 10 жыл бұрын

Been working on 28 gauge spirals with 6,5, and 4 strands and I love it. Have you tried using nylon pliers? I was in a hobby store picking up a pair of flat pliers when I saw them so I got both. I ran the wire through the nylon jaws first and it made the whole flattening process easier. I was able to gently fix small imperfections and get the wire more even before I hit it with the flat nose. Wires are snapping less and the twist looks tighter. I was actually planning on doing a spiral parallel so while I'm bummed that you beat me to it, I'm glad you shared some new stuff before I wasted another mile and a half of kanthal.

@TwistedMesses 10 жыл бұрын

I'll have to check the hobby store for some of those nylon pliers, sounds like a useful tool to add to my kit, thanks!

@benwilliams9546 10 жыл бұрын

Twisted Messes update. 1st zipper turned way too hot so went a size up. I wish I could remember what they were but with all the airflow options that observation might be pointless. 2nd one rocks and have kept it on for a record breaking 2 weeks. This week though it is getting much much hotter. Have you noticed a break in period?

@TwistedMesses 10 жыл бұрын

Ben Williams haven't notice a break-in period so far. I'm still using the zipper-coil from this build video! Lol, that's the record for me for sure. Keep trying other coils and keep coming back to this one. Wire is starting to break down though and doesn't hit quite as hard anymore. Not sure why it might be getting hotter for you. Are the coils still lighting up evenly during dry burn?

@Tillthemen 5 жыл бұрын

@Ben Williams how much mm you wrap around, i want to build a 4 strands to?

@pbaggins603 9 жыл бұрын

i like your vids way better than some other loud mouthed chuckle head we know. keep it up, and thank you for making videos i can watch without turing down the volume

@Craig-ib7gk 8 жыл бұрын

Fantastic work, sir. I'm' curious. Normally when I do a parallel of substantive width per wrap (ex: a parallel clapton) I have the outside lead loop *over* rather than under if the deck allows for it (and yours does) so as to give the wick on the outside edge an earlier drop point to the juice well. Do you normally do the same, and if so, why not here? If not, why not ? Just curious. Again, awesome build. Thanks for the outstanding ideas.

@jellbeeaner5137 10 жыл бұрын

Awesome tutorial

@JohnWDisco 5 жыл бұрын

Zipper Coils are my favorite, super easy to build. They do kill a lot of juice though.

@fabio93bg 10 жыл бұрын

the best!

@JohnnySkillish 9 жыл бұрын

This must throw off some serious heat; never-mind a dual-coil of the same! How does that work out? Have you ever put it on a mod with temp control/reading? Very curious...cool vid man. Peace!

@darthvaper5105 8 жыл бұрын

try fusing it. makes a great result

@MegaRussell12 9 жыл бұрын

I thought I was a vape nut until I just seen your dual zippers. my normal build is duals with 24 gauge wrapped 15 time around the blue handled screw drivers that rdas come with. usually vape that through a plumes veil on a sigelei 100w at 50 to 60 watts. built my first zipper last night and its a stronger vape at 30 watts then I am use to. dual zippers would kill me.

@spyralspyder 9 жыл бұрын

suggested this to Ripp, but also suggesting it to you... You should try your hand at silver and gold filigree.

@AquidneckRider 9 жыл бұрын

Just came across your channel and this is the first vid I'm watching. Got a question unrelated though..Do you do MMA,Wrestling,or Boxing?

@VballVert 9 жыл бұрын

Damn nice job! that is a piece of FN artwork. Don't know who invented this coil. I've watched rip trippers as well. very good builder also.

@MattPlaysDrums 8 жыл бұрын

tried it without flattening it and a single coil at 4 wraps came out at exactly .2 and personally I like the unflattened look better but that's just my opinion

@richardpeterson3753 7 жыл бұрын

would this work with round kanthal as well? and what optimal resistance and Watt level is recommended? I will be running 24 guage, probably 3 mm diameter coil and I'm guessing maybe 8 wraps. have to put that into a coil calculator to see what it would turn out as. I can go up to 350 Watts on my mod. 40-60 is my comfort spot. can run temp control though that isn't ment for standard kanthal really. and can adjust resistance once it's on my mod by a small degree either way.

@zombienebula1788 8 жыл бұрын

was the dual coil that you built also a parallel zipper or two separate spiral?

@bigmikegotzjesus 10 жыл бұрын

Any advice on wicking? Cotton keeps getting nasty real quick.

@frankcatrini3129 10 жыл бұрын

Work of art my friend, think I will try that so thanks. Also if you don't mind me asking, what type of camera are you using and how and where is it mounted as your shooting?

@TwistedMesses 10 жыл бұрын

I'm using my galaxy s5 for the majority of it. The macro vids are using my s4 with a lense attachment. The lens kit I bought came with a tripod which I mount my phone on, and put it right on the edge of the table I'm building on just behind my hands

@frankcatrini3129 9 жыл бұрын

Thanks buddy appreciate the info

@pashkin5436 9 жыл бұрын

What's your gripka ? and pull the wound on iStick 50W ?

@1776freddie 9 жыл бұрын

What box mod are you using?,how much was it?,and where could I pick one up at?.i love your videos bro.keep up the great work.✌️

@tacticalcustard5488 9 жыл бұрын

It's a made box mod he didn't buy it he made it

@JustCedThings 9 жыл бұрын

I started with an ego 2 months ago. Last month I upgraded to an istick+naut mini. I now want to upgrade again. What would you suggest for a first time builder?

@x_____________5550 9 жыл бұрын

go with something like a mutation x v2 or v3 atty, those are only like 25 bucks for an authentic, and go for a sigeli 150 watt or ipv3 150 watt. they both fire down to .1 ohms and go from 7 - 150 watts. so you have a good range of options. they are both around the same price so its really just a personal preference.

@bLaZeThEkRaZe 10 жыл бұрын

holy moly, you look like a completely different person with short hair. off subject but thanks for the vid!

@TwistedMesses 10 жыл бұрын

Lol! Indeed :)

@jamesparshall7604 9 жыл бұрын

couldn't you just make one wire and either bend it in half to do the parallel part or cut it in half and flip one wire 180 degrees for the same effect?

@alecbernal3824 8 жыл бұрын

+James Parshall I don't see why the hell not lol. It would also keep the two strands consistent in their number of twists so that the grooves would always line up.

@jamesparshall7604 8 жыл бұрын

Thought might be quicker lol

@ColonelK0rn1 10 жыл бұрын

Might sound like a stupid question, but couldn't you twist one long strand of 3 wires, cut it in half, and flip it over? That would remove three steps, and lessen the confusion.

@TwistedMesses 10 жыл бұрын

If you flip the wire around the twists are still going in the same direction. That would be nice though if you could just do it that way. I bet parallel spiral wire would perform similarly, so wouldn't hurt to have them both twisted in the same direction

@TwistedMesses 10 жыл бұрын

@ColonelK0rn1 10 жыл бұрын

Twisted Messes Ahh, you are correct sir. I'm going to be giving this a go this morning. Not happy with the performance of my current build, and have been tinkering around with others. Looking forward to trying this out. Thanks for the thorough instructions, and taking the time to share with us.

@VexShiza 8 жыл бұрын

I think ever coil builder has the same set of screwdrivers now. I know you say what size it is but I don't own any drill bits so is that the #1 or #0 fillips head screwdriver?

@kathernellis4131 7 жыл бұрын

VexShiza 1/8=#0

@ahkwa777 8 жыл бұрын

Stupid question: When referring to it as clockwise or counter-clockwise, is it when looking at the drill head on, the way that it is spinning then? Or what?

@FlexdTV1 8 жыл бұрын

+Anton Hofstede yes the way the head is spinning. So if you are looking directly at the head and it is turning right, that is clockwise, and vice versa.

@darthvaper5105 8 жыл бұрын

stops the pop and picks the flava and vapor up.

@yetisuncle666 8 жыл бұрын

man, i must say you sir, are an artist. I know its prolly taken you a long time to get to the level that you are at, but still I honestly believe that you are extremely talented. I wish you continued success, and eagerly anticipate your future builds.

@kshnitz 10 жыл бұрын

Nice Vid. Very helpful. Where did you get the Box mod / Parts at. Looking to build my own

@TwistedMesses 10 жыл бұрын

I finally got everything together for the box mod, had the parts laying around for more than 4 months so can't remember where I got everything. The original battery box I purchased melted down under a .5ohm load, so I bought some pretty thick copper wire and shaped it into springs for the ground connection. The switch is just an a/c 125v 3amp switch, I figured if it can handle that voltage at 3a (around 375w) then it could probably handle anything I throw at it. Think I got the 510 from madvapes or something. I didn't show the inside of the box because it's pretty janky and not a good example of how you should build one lol. I hear there are some pretty sweet groups on facebook with a bunch of modders sharing their box building secrets though, wish I remembered the name for you

@brandonflanagan8029 10 жыл бұрын

Twisted Messes Your logic regarding the switch is not correct. 3a is 3a regardless of AC/DC. You're passing over 20a though that switch. When it fails, hope that it's not in the on state.

@TwistedMesses 10 жыл бұрын

Brandon Flanagan damn, was worried about that. Oh well, easy enough to unscrew the atomizer if it gets stuck in the lock position. Just figured the end game was wattage, didn't realize it could be limited by amps regardless of voltage

@_mnejing 10 жыл бұрын

Twisted Messes The quickest and easiest solution is to toss a MOSFET in it. It handles the load, and then you can actually use whatever switch you want.

@iscootnpoot 10 жыл бұрын

Nick Morrissey do you have ever a schematic for an unregulated box mod with a mosfet? Looking to build one but I don't know what type of parts to get for it.

@thercoperator146 9 жыл бұрын

Damn you work slowly..

@iHawke 9 жыл бұрын

This guy is just adorable (no homo)

@mrenkil 10 жыл бұрын

You mentioned wire Smith in your video. I couldn't find him on KZfaq.

@TwistedMesses 10 жыл бұрын

I don't think they have any videos up. They just commented on my last vid

@mrenkil 10 жыл бұрын

Thanks... You do a good job on the build videos.

@timothychessel1958 10 жыл бұрын

Could you twist all the wires in the same direction and just flip one over and it would be the other way

@TwistedMesses 10 жыл бұрын

Unfortunately when you flip it around the twist is in the same direction as when you started. Same principle as a screw, if you cut the head off a screw you can use either end to screw into a threaded hole

@HReality 9 жыл бұрын

I want to know where you got the box for your mod.. everything I find is huge

@matrodfpv 9 жыл бұрын

Hammond 1590b

@TwistedMesses 9 жыл бұрын

Hammond 1590g, got it from mouser

@kbarnikow 8 жыл бұрын

Can you show me how to be a master of silent jumping.............

@tracytaylor8171 9 жыл бұрын

Great Video Love the shirt to Im from Boston Ma :)

@likeitsensimilla 10 жыл бұрын

i flattened one of my wires way too much lol the grooves were barely visible

@TwistedMesses 10 жыл бұрын

Yeah it's awesome when you can get it to do that, works even better that way

@tomaswolsink7620 9 жыл бұрын

Hey men great video the box mod you are using is that diy ? or is it a factory build? can i use it on my hanamodz dna 30?? i hope for a reply keep up the nice coils

@TwistedMesses 9 жыл бұрын

That's a diy box. If you used 30g instead of 28 and did a single coil I think a 30w box would work pretty well. But honestly I've never had a 30w box so can't give the most accurate answer for that one :)

@tomaswolsink7620 9 жыл бұрын

Hey thanks for the response decided to build a box mod my self it worked out great !

@christopherallen5479 9 жыл бұрын

ok I wrapped 2 strands of 26 gage then twisted them around 2 strands gage 24 then repeated I don't know how many wraps to make the coil it almost looks like the zipper but with 4 strands instead of 2 but I don't have and have never used an omb meter I got a ipv 3 an doge2 should I go with 6 wraps around 7/64 drill bit dual coil i haven't taken my quad coil out but hurry and answer i want to try it

@x_____________5550 9 жыл бұрын

I'd love to help you out man, but could you clarify that a little bit? Its really confusing.

@MattDavid23 8 жыл бұрын

Instead of doing two different sets, why not just do one long set of twisted, cut it in half, and flip one end the opposite way?

@TwistedMesses 8 жыл бұрын

Check the rest of the comments :)

@MattDavid23 8 жыл бұрын

+Twisted Messes Oops. Commented before reading

@GearObsession 10 жыл бұрын

★★★★★

@richardpeterson3753 7 жыл бұрын

and I got that rda lol. but in copper. big mistake. should have got steel

@Ucceah 10 жыл бұрын

how does it comepare to using al wires twisted in the same direction?

@TwistedMesses 10 жыл бұрын

Like a parallel build with all wires twisted in the same direction? Not sure actually, would probably work similarly

@bobbysmithwick8114 3 жыл бұрын

Its probaly going to ohm the same... Zippers are just a better looking coil to the eye.

@jesusrincon24 9 жыл бұрын

I like the part where you walk through the wall at 2:39 lol

@classiccafe1 9 жыл бұрын

I don't have 20 minutes to fuck with a coil but that's me I'm sure after spending an hour fucking up this build and rebuilding it most will agree

@vappiesmarcado2446 9 жыл бұрын

I tried this build once and found it pretty easy. Didn't take 20 mins either. If you don't have trouble building a regular parallel coil this shouldn't be to hard for you.

@epicgrimm8233 9 жыл бұрын

i have HORRID attention like ... if there was a competition on who had the loudest add .. i could place XD any ways my point .. i have found such an enjoyment in making these coils and seeing my friends and husband chuff clouds that i .. pretty much made (i chase clouds too but its fun to see others enjoying something i made with my hands). As annoying as this thing looks for those who have found the art in coil building dont see irritation .. we see challenge :D but that may not be you either Mike King no hard feelings tho just sharing :) it would be very boring if we were all the same right :)

@kikkibergen 8 жыл бұрын

After seeing many of your videos, I got to say that hearing "uuhm" all the time gets me on the nerve.

@eyezon1975 10 жыл бұрын

Nice. +1 sub.

@32Yankes 9 жыл бұрын

What size of screwdriver did u use ? Can u say it in milimeters ?

@jarodmiller9712 9 жыл бұрын

This being my normal coil I run I can say that a smaller drill bit is best... Something in the range of 2mm to 2.5mm

@32Yankes 9 жыл бұрын

Okay thanks m8

@jamesmelton9211 10 жыл бұрын

Details on your Ohm-meter?

@TwistedMesses 10 жыл бұрын

I got it as part of a prize for a build off contest on "the builder's bar" face book group. It's that usa made ohm meter, not sure of the company name sorry