Always a pleasure to watch your builds. So clean. Thanks
@bobmillerick3002 жыл бұрын
Outstanding. I really like your shop as well.
@matheuspereira9074 жыл бұрын
Lindo que sonho um dia quero conseguir comprar um aero deste parabéns mesmo vc é um máximo suas construções são extraordinárias parabéns mesmo
@chrisknight2854 жыл бұрын
Very nice.. building the same bird engine and all. Your a month or two ahead of me.. looks great
@marinjeam4 жыл бұрын
Beautiful build 🔝
@peterrussell52164 жыл бұрын
Hi there commented on previous video, could you show how to do the weathering and the dirty wash, new to hobby, and got my spitfire to painting stage, you must have put a lot of hours into your array of planes they look amazing, keep the videos coming stay safe
@yak55sp1 Жыл бұрын
Amazing
@thecraftking1134 жыл бұрын
Quite a project 👍👍👍
@youknoweverything76432 жыл бұрын
I built same plane used the kit wood as templates to cut my own pieces cuse I like to save the kit wood in all my balsa planes due to the fact that some of my kits are 20-60 years old and you can't buy them anymore and if I use the kit wood then the kits is gone forever besides plans so I use the kit wood as my templates to trace onto the new balsa wood which is probably stronger from the kit wood sitting for ,20 plus years and getting weaker over time and after I use it as templetes I vacuum seal all the kit wood air tight to save it to build plane again or sell or collect in the future I'm only 30 so my oldest lot which is 55 years old I can hold onto it for years and hopefully it will become so rare to have the original wood and full kit that it will be a very valuable collectable model like the rest of my vintage balsa kits. I got about 53 vintage kits that are complete brand new still sealed newest one is 23 years old telemaster the big one which I built using my own wood of course. I also have about 10 other balsa kits few from bang good that I did use the kit wood that was laser cut and made a beautiful scale model Cessna and a few others from dancing wings I built and I have one giant 1/4 scale f4u Corsair I built don't know the brand because it came in a different box cuse original box was to damaged the guy threw it away and properly preserved the whole kit so I used my own wood and built it took me 3 months working on it every night after work in my apartment or the garage I rented in my complex accross the road to turn into a workshop and I have about 12 1/4 scale warbirds in there and all the kids and adults are in wow when I have door open in evenings working on my planes and building them or painting them.
@Lawzy7 ай бұрын
Hi Mark. Great video, thanks. I’m looking at starting a build. Did you ever repair/rebuild the model? I’ve seen a lot of techniques for scratch building and how to best protect the plans on the table. What did you use with the build?
@user-ob1tn5rf5g4 жыл бұрын
Wow! It seems very interesting and difficult. Thanks for this video, I'll like it.
@btomas2253 жыл бұрын
Where did you get the cut kit? The plans shows 5-ply aircraft ply for the wing spars.
@markbrownrc16793 жыл бұрын
It was a Ziroli kit
@shelbyseelbach9568 Жыл бұрын
My understanding of this design is that there are weaknesses in the wing as designed? Were any specific steps taken to address this issue?
@markbrownrc1679 Жыл бұрын
No I wasn’t aware of the problem at the time of building it the wing broke off after 8 flights in flight at 300” and destroyed the model the model has been rebuilt and it ready for paint. The wing spare has been beefed up. I will post the rebuild once it’s finished
@shelbyseelbach9568 Жыл бұрын
@@markbrownrc1679 Sad to hear, was a fantastic build.
@daviddeselms26573 жыл бұрын
Can you post about the wing failure and submit possible remedies? I'm building the very same plane. I will probably beef up the middle spar. Did you glass the wing? Thanks
@markbrownrc16793 жыл бұрын
yes the wing was glassed with 3/4 oz cloth. I would biff up the main spar and the two at leading and trailing edge of the wing. the wood supply for my kit was only lite ply double the thickness at least for the main spar.
@matchett1003 жыл бұрын
Hi Mark would you mind telling me the brand of that red filler you used to fix up the wing on your hellcat? Thank you John
@markbrownrc16793 жыл бұрын
matchett100 Hi John 3m Acrylic - red glazing putty
@matchett1003 жыл бұрын
Mark Brown rc cheers mark
@bayarea51684 жыл бұрын
What is the workflow from sheet to laser cut?
@user-rz6ei7dj8r3 жыл бұрын
Where can I find this plan?
@piloto300 Жыл бұрын
Great video! What retracts did you mount?
@markbrownrc1679 Жыл бұрын
Robart
@piloto3004 ай бұрын
Many thanks! And the engine?
@factbazar42863 жыл бұрын
sir how can i get plans for making this
@markbrownrc16793 жыл бұрын
google Nic Ziroli plans and you will find it
@chrisknight2853 жыл бұрын
Curious if she's been maidened yet?
@markbrownrc16793 жыл бұрын
Yes I had 15 great flights it flew Beautiful but sadly it ended on the 15th flight when the left wing broke off at around 400feet the result was not pretty. I will rebuild it but the wing is going to need some serious strengthening around where it meets the fuse.
@chrisknight2853 жыл бұрын
Aww man...
@chrisknight2853 жыл бұрын
Mark.. id love to have a more in depth conversation with you about your thoughts on why it failed, as well as the eme70 and how it performed. . I just completed my own z-corsair.. this is the second instance I've heard of a failure at the fuse. Email me at your leisure if you would like to open a conversation. Csk2870@gmail.com
@mgerks3 жыл бұрын
@@markbrownrc1679 Great video and work. Sad to hear about the planes end. I had a ziroli corsair for about 10 years with at least 1000 flights on it before it crashed( my fault always check your batteries) I am in the process of making a new one and i am curios why yours failed.
@markbrownrc16793 жыл бұрын
@@mgerks Hi just make sure you biff up the 3 wing spars in the centre of the wing down to the re-tracks I would double the plywood and use good aircraft ply the ply Ziroli supplied was only three ply you need to use six ply or greater. I will build another one someday it was one of the best flying aircraft I’ve ever owned sad to lose it good luck and if you get the wing wight you we love it. Cheers
@marinjeam4 жыл бұрын
What engine is used ? thanks
@markbrownrc16794 жыл бұрын
The engine is a EME 70cc self starter
@user-eh6mu8cg6z2 ай бұрын
Good day! I'm sorry, I've been looking for drawings of the f4y airplane model for a long time! You can share the drawings (send copies) by email?! I am grateful for the early!
@markbrownrc16792 ай бұрын
F4U-1 Corsair Plan Zoom F4U-1 Corsair Plan Previous ProductNext Product $60.00 PRODUCT ID: ZIR:F4U1 Scale: 2.25" - 1' Wingspan: 93" Length: 72" Wing Area: 1650 sq/in Weight: 28-34lbs Power: 62-85cc gas Accessories Engine Options Landing Gear Wheels & Tires Referred to as the "Whistling Death" by the enemy, the famous Corsair was flown by many Navy and Marine fighter pilots like Ira Kepford and Greg "Papy" Boyington. ziroligiantscaleplans.com/