Nice comparison. I am going to try this arrangement out. I have a small garden so I think it will work well for me.

Excellent!!!!!

Gòod info Brian , i am an Antenna nut ,your setup is great , good work , 73 , K9UT Tks

That's brilliant Brian. Having that coil switch in and out gives you the confidence its working. You must be in a good location as I here very little OC from my QTH. I may try this method some time and full credit to yourself. 2 s points is 12db in a Kenwood so pretty good.

very interesting. How to achieve excellent results with minimal expenses.

Fantastic video Brian just looking at your KZfaq videos after a nice qso with nigel g4bsw he recommended to check them out ..I will be out making this vertical array at the weekend 73 john m0asn 😉👍 15:33

What i never get about parasitics, is how to lay out the radials so the radials from the parasitc to interfere with the raidals from the driven element. Then? I start thinking about half squares to achieve directionality instead. Then? I think about a larger half square behind it, and a smaller one in front. All the Best! 73 DE W8LV BILL (W8LV/VE3 prepandemic.)

Great idea

Impressive!

Great job Brian!

Hi Brian, you mention a previous video on the 2 element parasitic but I can't find that video? Comment on your coil F/B results: very conclusive however to see if it switches direction it'd be great if you took signals from the opposite direction to show them stronger there (e.g. from VK). How do we know the comparison of one vertical on its own vs with the reflector? It could be the results showing without attenuation, then with attenuation of parasitic, though I doubt it, it seems likely this is working very well as intended. Just recently we were discussing whether a 1/4 GP can be used in this manner, as we could not find any literature other than phased verticals fed and need to be a whopping half wave apart. For vertical dipoles (or EFHW which could also be fed at bottom with unun) there's plenty literature. Coincidentally I came across your video here and it does seem to show great improvements also for a 1/4 GP!