Zoukei Mura 1/32 Bf109G-14 Part 7

Zoukei Mura 1/32 Bf109G-14 Part 7 - final reveal

Рет қаралды 10,244

Жыл бұрын

In this new series we're building the new Messerschmitt Bf109G-14 "Hartmann" from Zoukei Mura.
In this last episode we finish the model
My Patreon pages are at www.patreon.com/bePatron?u=50...

Пікірлер: 97

@Tony_SZ97 Жыл бұрын

Absolutely remarkable! Beautiful work! This is by far the best modeling channel I've ever come across, such a talented person, an accomplished artist, master of his craft, thank you very much for sharing your Art!

@TheModelShed Жыл бұрын

Thanks for the kind feedback Antonio I really appreciate it

@robbo1068 9 ай бұрын

There's no doubting your skill at both the way you build your models and the information you present to us viewers. Inspirational from start to finish. I thoroughly enjoyed this series and look forward to catching up with the next.

@TheModelShed 9 ай бұрын

That’s good to know thank you 👍

@loken67 Жыл бұрын

Excellent result Steve. The stills at the end just show what skill and love you put into your builds. Looking forward to the next 1/32 kit.

@TheModelShed Жыл бұрын

Thank you Ralph Ingo hopefully it won’t be too long before the new 1/32 gets under way.

@finlayfraser9952 Жыл бұрын

Splendid job Steve.

@TheModelShed Жыл бұрын

Cheers Finlay

@eddywells5689 3 ай бұрын

As always amazing build love your painting and decal work 🍺👍💞

@TheModelShed 2 ай бұрын

👍

@mauserkk98 Жыл бұрын

A nice finally and impressive build.

@TheModelShed Жыл бұрын

Thanks Nicholas 👍

@olafvoigt4445 Жыл бұрын

You have as always done such a superb job on this fantastic kit….thank you for sharing

@TheModelShed Жыл бұрын

You’re welcome thank you Olaf 👍

@AlisonFort Жыл бұрын

Very nice - really captures the look of the later 109s. Great build to watch

@TheModelShed Жыл бұрын

Thank you I think the Fs were the best looking 109s in the series. Maybe I'll build one sometime

@ModelkitStuff Жыл бұрын

looks great, enjoyed the whole series.

@TheModelShed Жыл бұрын

Thanks Jason

@SteveSmith-kf9on 10 ай бұрын

Lovely job mate , spot on

@TheModelShed 9 ай бұрын

Thanks Steve

@detlevschmalzbauer9808 Жыл бұрын

Fantastic work,Steve!I ask myself,why they didn't used two pieces of copper wire for the brake lines instead of molding them.For cutting and sanding without breaking them everyone deserves a medal!

@TheModelShed Жыл бұрын

Yes that's right Detlev they are very fragile - but I was forewarned from my earlier experience breaking the engine bearers.

@davidguy6823 Жыл бұрын

Stunning demonstration of skill and patience producing a superb end result. Thanks for sharing.

@TheModelShed Жыл бұрын

Thank you David 👍

@andypreston2982 Жыл бұрын

great build steve

@TheModelShed Жыл бұрын

Thanks very much Andy 👍

@triruns Жыл бұрын

Congratulations on another amazing model completed! Thank you for bringing us along.

@TheModelShed Жыл бұрын

You’re welcome Kevin 👍

@ralphford4302 Жыл бұрын

Steve, an absolutely beautiful build start to finish, thank you for sharing

@TheModelShed Жыл бұрын

Thank you Ralph much appreciated 👍

@alancrowley7991 Жыл бұрын

Great build series Steve, with an impressive end result, your very welcome, looking forward to the announcement of your next 1/32 project!! 👌

@TheModelShed Жыл бұрын

Cheers Alan Ive even been painting Herr Hartmann this afternoon it’s a very nice little miniature

@alancrowley7991 Жыл бұрын

Yes I did wonder where he was!

@evanandgemma1 Жыл бұрын

Beautiful work as usual Steve, can’t wait for your next project.

@TheModelShed Жыл бұрын

Thanks Evan

@pierretrepanier3671 Жыл бұрын

Awsome build, up to your standard. Love the way you take on these projects. 👍

@TheModelShed Жыл бұрын

Thank you Pierre

@SprueFascinationChannel Жыл бұрын

Lovely result 👍

@TheModelShed Жыл бұрын

Thank you 👍

@FinsburyPhil Жыл бұрын

Beautiful work Steve. It did look like a tricky build but I really like the way you calmly work through the challenges.

@TheModelShed Жыл бұрын

This one gave me plenty of challenges Phil - it was nearly a contender for the bin at one point 😬😬

@oscarruf4260 Жыл бұрын

Hats off to you Steve for a very thoroughly building and painting process on a such over engineered and complex kit. The result certainly paid off! (but I think I'd stick with my Hasegawa, Revell and Trumpeter kits!) Cheers from Chile!

@TheModelShed Жыл бұрын

it was a bit over engineered - completely different to the Kotare spitfire I’m working on now

@petebird7171 Жыл бұрын

Expert doesn’t even begin to cover this, what a superb job , great work 👍👍👍👍👍👍👍

@TheModelShed Жыл бұрын

Very kind thank you Pete 👍

@midnightsuns1000rr Жыл бұрын

Looks great, all your hard work really paid off

@TheModelShed Жыл бұрын

Cheers Greg

@clemensliegler184 Жыл бұрын

Outstanding, also the presentation, all the best for you.

@TheModelShed Жыл бұрын

Thank you Clemens

@michalwarszawski Жыл бұрын

Holy Moly Amazing job!!!

@TheModelShed Жыл бұрын

Cheers Michal

@usssaratogacv3lefevre978 Жыл бұрын

Great Build!

@TheModelShed Жыл бұрын

Thank you

@johnboy384 Жыл бұрын

Thanks again, sad to see this series end.

@TheModelShed Жыл бұрын

Don’t worry there’ll be a new series soon 👍

@richardmartin604 Жыл бұрын

Bonjour Steve, encore une très belle prestation. Bravo

@TheModelShed Жыл бұрын

Bonjour Richard et Merci.🙏

@chrisbrown-ed6du Жыл бұрын

Currently building this and it’s a stunning kit I just hope I can do half has good a job as you have it’s fantastic well done

@TheModelShed Жыл бұрын

Thanks Chris good luck with it.

@paulmanuse2353 Жыл бұрын

Great tips. Great build!!

@TheModelShed Жыл бұрын

Thanks Paul 👍

@mickrobinson1112 Жыл бұрын

excellent work

@TheModelShed Жыл бұрын

Thanks Mick👍

@regnorth8659 Жыл бұрын

best build of this model i have seen!

@TheModelShed Жыл бұрын

Very kind thank you Reg

@jerryplews1023 Жыл бұрын

Well done on such a nice job. So much detail it's almost a shame it gets covered up. Well done steve

@TheModelShed Жыл бұрын

Thanks Jerry yes I agree its all a bit of a waste - Id take a different approach if I were doing this again but I wanted to do this OOB so viewers could see the kit as it was intended by ZM. Ive got the much cheaper Revell G-2 and it will be interesting to see how they compare

@willpaulson8509 Жыл бұрын

Very nice Steve! Sounds like a kotare spit up next perhaps…?

@TheModelShed Жыл бұрын

You must be psychic Will - that's exactly it

@CAPNMAC82 Жыл бұрын

YT. Harrumph. Missed it again. Great build & Video.

@TheModelShed Жыл бұрын

Thanks Mac

@paulsmodels Жыл бұрын

Very nice build! 👍

@TheModelShed Жыл бұрын

cheers Paul 👍

@danl.909 Жыл бұрын

Superb.

@TheModelShed Жыл бұрын

Cheers Dan glad you like it 👍

@andredrahonnet7592 Жыл бұрын

Bravo

@TheModelShed Жыл бұрын

Thank you

@wasrio1403 Жыл бұрын

Great series. It's interesting that there isn't a canopy tether.

@TheModelShed Жыл бұрын

There is now - I'll update later!

@derekrawlings1289 Жыл бұрын

Absolutely stunning. You’ve probably mentioned this in other videos, but what do you use to glue on the detail parts without ruining the paint? You seem to have good working time with whatever it is.

@TheModelShed Жыл бұрын

Medium CA Derek - it gives about 10-15 seconds in most cases

@stevenpiper970 Жыл бұрын

I saw a new 32nd scale Hurricane coming soon.

@TheModelShed Жыл бұрын

Yes I’ve seen that too - looks great

@dlthomson5287 Жыл бұрын

Congratulations on another fantastic build I enjoyed watching every minute. One thing I want to ask is how long do you let the wash dry before removing it? Can't wait to see what is next in store.

@TheModelShed Жыл бұрын

Thank you it was a love hate build for me but it turned out ok in the end.

@johnmclean6498 Жыл бұрын

Yes she's a beauty. Always loved the 109 - a worthy example of German engineering in terms of production numbers and air forces flying it. Watched every minute and looking forward to the next build. I will try your fearless treatment of decals (lifting them with a brush). Was there not a steel cable securing the canopy in the open position? Maybe not on this variant. Also the cowl hinges must have had an internal fitting which held them up. Great engineering, if so. Your treatment of exhaust stubs is exactly correct, with the forward one getting no blow back. I did it (not so well) on my Tamiya Spitfire. Much appreciated Steve.

@TheModelShed Жыл бұрын

Thanks John yes you’re right on both counts but I ran out of time to fit them. I actually put some PE brackets on the sill and armour plate ready to connect them with some PE line left over from my HOOD build. I might get round to them both eventually.

@johnmclean6498 Жыл бұрын

@@TheModelShed Yes mate - the extra supports will add much needed strength to those vulnerable parts. I often wonder what the pilots thought about that swing canopy. If you turned turtle (not an uncommon accident) there was no getting out till help arrived. At least in their Allied opponents the canopy could be closed after takeoff.

@johntreloar8203 Жыл бұрын

Nice end result Steve, Thought Zoukei Mura would of done a weighted wheel, considering the detail they put into this kit? Any hint on what's next?

@TheModelShed Жыл бұрын

Thanks John yes I suppose they could have - then again so could I if id have thought about it! Kotare Spit next when it gets released hopefully Feb/March

@andreaskolling3749 Жыл бұрын

Fantastic work. One point: I am messing the rounf antenna for the FuG 16 that is typically placed behind the cockpit on the red painted bubble. Is it missing for that historical Hartmann plane or simply because Zoukai Mura copied a museum piece or was that Hartmann plane not equipped with that round antenna?

@TheModelShed Жыл бұрын

Theres a clear photo of Hartmann getting out of this aircraft which clearly shows the antenna missing - just the mount is present, ZM got it right.

@andreaskolling3749 Жыл бұрын

@@TheModelShed thanks

@KHKH-os6kt Жыл бұрын

Why silver the propeller as it was made of wood.

@TheModelShed Жыл бұрын

Interesting I’d like to look into that a bit more before correcting it if you could let me know your sources. My understanding is that early 109s and some museum aircraft have wooden props for sure: but my research suggests that late mark 109s including the G-14AS were fitted with metal VDM9-12159 blades. There are plenty of photos on the web of late 109s (including a K) with bent blades after bellying in. I would have thought that wooden ones would shatter?