🔥 SUPPORT CHANNEL !!! SUBSCRIBE AND LIKE 🔥
This video shows how to replace the ZTE Blade v9 battery. We heat the glass of the body, on a hairdryer 200 degrees, who have no experience, put 150 degrees. We pry the glass with a thin plastic or blade and peel off the glass of the case, glued to the tape at the edges. Gently and without sudden movements, we raise the right edge (so as not to tear off the cable of the fingerprint sensor) and unscrew the protection. We turn off the battery, warm it up a bit with thin plastic (you can wet it a little with alcohol), the battery is glued to the edges. PLEASE CAREFULLY so as not to damage the display cable and mainboard. We glue the double-sided tape and put a new battery, fasten the protection. We apply B7000 glue to the frame, connect the fingerprint sensor, and glue the back glass of the case, hold it, you can use clothespins or stationery, after 3-4 hours you can use it, but preferably after 10 hours.
ДОНАТ -- DONATE
streamlabs.com/vgeni4kadisass...
www.donationalerts.com/r/evge...
Вконтакте
flerik
Facebook
/ flerikkiev
Instagram
/ the_flerik
Twitter
/ the_flerik
Реквизиты на которые вы можете перевести помощь, поддержку, благодарность и на развитие канала
ВЕБМАНИ / webmoney
R904207237990 Рус рубли
U310915925429 Укр гривна
Z299720621617 Сша доллар
E513530553569 Европа евро
#zte #blade #v9