Thank you for sharing this video, which inspired me a lot. I was able to reuse my BMW satnav cradle to fit my new Garmin Zumo XT in, without having to purchase/order adapters. Actually, I reuse the same four holes instead of drilling new ones, I used some more washers (I had to purchase longer screws), and I customized a lock (from a metal square bracket) that I screwed on the existing one. This way, the XT is a little bit more out of the cradle, but it is secured and easily removable.

You sir are a clever man. I like it and yes about to fit mine. Thank you!

Thanks for the video! I just mounted my Zumo XT to my 2023 using your video as reference and it works like a charm. I clipped off the factory end and soldered it to the Garmin harness.

Top video mate. Just done this modification on my bike and it works perfectly. Only difference was I used a 6mm bolt for the locking pin. Thanks for sharing 👌

Thanks for the vid! Helped me a lot. Saved money using original mount and it looks clean.

Fantastic. Thanks so much. I’ll be doing just that. All the best from 🇨🇦.

Bloody epic mate , well done looks brilliant

Perfect, many thanks for this. I've just ordered my Zumo for delivery on Thursday so I'm now looking forward to installing at the weekend 🙂 Love your garage btw

G8 solution! I was looking fór adaptor for my Zumo xt2 and in fact I have found only two possibilities : 3DAM that looks cranky and Wunderlich that is solid, but thick like hell. It was luck I found Youryblack video - this is exactly what I was looking for! Thanks man, you have solved my last week headache! 😂

Thank you great video and I'll now retrieve my BMW Nav Cradle from my box of bits.

Wow ... thank you! I have an XT on order and was looking at all sorts of $$ solutions: Wunderlich, Touratech, Techmoto, Motopumps. Being charged for the GPS prep it's kind of nice to use it!

Nice tutorial - thank you!

Hi David, thanks for watching, but I'm not sure what you mean by 'shoulders', but I don't recall any issues with where I drilled the holes, at the time I just guessed at about 4mm across and 2mm down and it turned out to be about right. So it sounds like your cradle might be different than mine ? my bike is a 2019 so maybe yours is older, or newer and it's different for some reason. Sorry you're struggling, others seem to have done it exactly the same as me and had no issues.

Thank you for sharing

Awesome job. Would love to know if anyone has successfully tried your method with the XT2. Looking at buying either the XT or the XT2, but happy to stick with XT if this method doesn’t work for the 2.

nice job !

Good Job

doe sthis also works for the XT2? i have a 2023 GS adv with nav prep on it...what you did looks so much more nicer then with an adaptor with the XT2 floating in front of it.. yours is a tight fit with the OEM BMW nav prep

Superb 😊

Hi, Just ordered my epoxy resin for the locking mechanism but I am struggling to find the connectors for the wiring. Any help would be greatly appreciated. Thanks.

Hello, I'm a little confused. I just finished drilling the holes in oem cradle as per your instructions. It seems that the 4mm horizontally is fine, but the vertical 2mm down doesn't work with the oem cradle clamping piece on the cross bar. There are shoulders, for lack of a better description, that don't allow any movement vertically. Am I missing something here or did yours not have these shoulders/wings on this piece?

Great video, very useful thanks. Do you have any idea as to what the offset on the drilled holes would be for a Garmin XT2? It’s a bit larger than the XT I believe?

Very interesting thanks. 😊 Would you happen to know if I could fit a Garmin NUVI 2599 in the BMW cradle somehow, as I have a hardly used one which I would like to make proper use of?

Hi, sorry, I have a question: how much thickness did you put behind the Garmin adapter with the washers?😊

Well done sir! If you know, what is the factory voltage for the Nav mount?

Looks Great! Thank You Sir!!

Can you access all the GPS functions using bike's hand controls Thanks

Once I stop watching the Giro cycle race I will get around to doing this. But I,m thinking even if I just mount the Zumo mount into the BMW mount it will still make it difficult for someone to steal. Could you tell me how long the drill bit should be please.

I’ve got to ask the question, why did you drill 4 more holes to move it over if as you say you don’t need to?

why its need to drill the 4 new holes in the OEM support? isnt it possible to use the default holes?

🤓😎🏍💨💨💨💨💨👍🏻🇨🇦 thanks for sharing.

How did you secure the bolt (drill bit).

Nice. But the nav wheel wont work, right?