Condor Products

Пікірлер

@L.Rottinghaus Ай бұрын

Loosen the wheel brakes in order to attach the front two tie downs using the I-bolt rings, winch the unit up....This all makes sense but to then remove the tie downs so that you can re-tighten the wheel locking mechanisms, only to have to re-attach the tie downs because tightening them with the straps on would cause them to twist..? Do you really need to tighten the motorcycle loader's wheels again if you secure the unit to the flat bed using 2-4 more tie downs?

@hulkhatepunybanner 2 ай бұрын

$600

@geoffreyjones6271 3 ай бұрын

My Condor garage dolly slides across the floor when I try to load my bike on it. Takes a few tries to get it on the ramp. Instead of a front tire having to climb onto the dolly, a simple ramp at the rear of the dolly would help tremendously. For the price of this product, I’m shocked the folks at Condor haven’t thought of this. The Harbor Freight dolly, by comparison, has a ramp to make loading easier.

@Nightboat 3 ай бұрын

Which setting for a 2018+ Honda Goldwing? 130/18.

@shaneksmith1957 5 ай бұрын

Show us what motor you use to pull the bike on the traler and how the loader keeps from shifting from side to side on the road.

@69littletoy 6 ай бұрын

Can you tell me what setting for 140 x17

@ainurusmanov7920 10 ай бұрын

Нормальная тема

@joem178 11 ай бұрын

Wouldn't be easier to put those locks like they have on the wheelchairs then have to turn that bolt when you can push a lever

@AltitudeRider Жыл бұрын

For a 12” wheel, what hole should the back pin be located?

@mikekletzel4657 Жыл бұрын

built my own for under 100 bucks and been using ir=t for years.. even demoed on U Tube

@billmadle1235 Жыл бұрын

I have to get one of those for my sportster

@zoneverter8537 2 жыл бұрын

Great Video !! Please keep making more such informative videos. I recently did a KEF Q150 Bookshelf speakers review on my channel. link for your suggestions and to learn from you kzfaq.info/get/bejne/f8ejl9mdqbTeeqs.html

@PainterD54 2 жыл бұрын

I just built one of those! It takes about 4-5 hours if you have a welder, and tools for steel fabrication. They do work great!

@jeffchandler1 2 жыл бұрын

I just went to buy one and see they raised the price, by a LOT!!! I'm just going to beef up the HFT dolly and bolt a wheel chock to the front of it. Ought to do the same trick for half the money.

@Greenmachine305 2 жыл бұрын

The good people at Condor enjoy overly complicated devices.

@drewgray1458 2 жыл бұрын

What is the benefit of hauling it in the stowed position? That seems like a lot of flat plate drag going down the road.

@SecurityForces702 2 жыл бұрын

Can use the quick release adaptor in a truck bed??

@mrsmile9760 2 жыл бұрын

Sir I need same this one ☝🏻 this available in uae 🇦🇪 ? Please contact me 00971551616697 WhatsApp

@mrsmile9760 2 жыл бұрын

Sir I need this one ☝🏻

@carljones3207 2 жыл бұрын

So…when the bike is ON the dolly in the trailer and moving it sideways, how do you attach to the trailer mount when it seems you will need to raise it up in order for the attachment screws to go into the mounting bracket?

@suaveanimations8662 3 жыл бұрын

Wade sucks

@ReverbAndBeer 3 жыл бұрын

TCM! f end up buyng ths product ma gettn' t from ya'll because of the musc!

@tims2188 3 жыл бұрын

Always love videos like this that "don't" duplicate real-life situations....that is...less than smooth garage floor surface for who has the money to have a poured floor as in the video. (2) Show a dresser on it instead of a scaled down bike with no bags, faring, crash bars etc weighing upwards of 900 lbs or more then I might be better impressed!

@dellparker7686 3 жыл бұрын

Any way for a short person to get the bike out of the wheel chock without a strain?

@wrenchbender01 3 жыл бұрын

That’s a lot of moving parts.

@rbyrdfamily 3 жыл бұрын

My Harley Fat Boy has fallen off of this thing twice now....I’m done with it.

@rbyrdfamily 3 жыл бұрын

My Harley Fat Boy has fallen off this thing twice now! I’m done with it!!

@roadlinktowing1261 3 жыл бұрын

Do you have a video showing how to I can remove the motorcycle from the dolly

@user-ey9if8ne2s 3 жыл бұрын

멋져요

@JonathanCiliaFaro 4 жыл бұрын

I had one I wasted my many, totally useless, for every day biker like me....

@ThePeopleRstupid 4 жыл бұрын

and they dont show a video on unloading it? NEXT!!! WTF!?!

@RoyFabian 4 жыл бұрын

Seems like a really cool trailer, but thats just too much work to set up.

@fagen2222 4 жыл бұрын

But you can’t turn it round with the Front stop you still have got to turn it round some how ?

@Knight_Glider 3 жыл бұрын

When I pull my bike in the garage to load it on the dolly it's facing the back wall. After winter is over and I'm ready to dig it out I place my bike so it's facing the garage door. To me that's turned around

@bobmohr4952 4 жыл бұрын

I bought a dolly that works just fine from Harbor Freight for $76 out the door. I have my 2014 Road King on it in front of my wife’s car in the garage right now.

@adultcrush1986 4 жыл бұрын

see this post about transport a motorcycle with a pickup truck www.giantstool.com/how-to-transport-a-motorcycle-in-a-pickup-truck/

@firstphoton655 4 жыл бұрын

2:55 HAHAAHAH! WHAT?

@rivec33 4 жыл бұрын

Damn I want that Springfield

@Hhhhhgggihgdd 5 жыл бұрын

Why not show in the video how easy it is to back it off ?

@BGPD70 5 жыл бұрын

Love love the e-track adaptor and it easily was adapted to my harbor freight heavy duty wheel chock and came with boomerang thank you condor

@anthonya8412 4 жыл бұрын

Hey I got the same Harbor frieght wheel chock. I am in the process of installing E track in my enclosed trailer. Could you give a little more detail on how you adapted the condor E track adapter to your Harbor Freight chock. Also what do you mean by boomerang? Thanks Tony