doing my first Venetian plaster work tomorrow. Glad I watched this. thanks
@Rcesarguimaraes8 күн бұрын
Have you Meoded Stucco lamundo?
@craighallam44728 күн бұрын
Is any wall really as smooth to begin with as a MDF board ---The question is older house drywall with the usual orange peel wall would you need to smoothwall plaster to make it smooth enough to use this product? How smooth is smooth?
@guyallen65069 күн бұрын
Hi, great videos! Just starting to learn to venetian plaster, how long do you wait until you burnish?
@josephaddotey645313 күн бұрын
It looks great. Thank you so much.
@DonnaRatliff118 күн бұрын
Ps. Mixing my own plaster and adding my own colors. Should be really interesting.
@DonnaRatliff118 күн бұрын
I'm getting ready to do venetian plaster with artwork on my livingroom walls. I've watched lots of videos but yours are the most thorough and entertaining. Yea I've done plaster stenciling but not venetian plaster before so this will probably be trip of a learning experience. Lol I'm gonna practice a little bit on some sample boards then go for it. 😂 Wish me luck with veneziano venetian plaster products.
@nevisscot769723 күн бұрын
What a beautiful kitchen .great refurb .
@MoforshinyewahShinyewah-le5th23 күн бұрын
Hi, with love and hugs from Cameroon 🇨🇲
@ginettebrossard259028 күн бұрын
I love your videos. Can vevetian plaster be applied to a plasterer brick wall?
@rafaelnickocruzАй бұрын
love how i had the same idea with the TRW students! Lets keep going G's!
@jamilasarly1614Ай бұрын
Where can I get supply ? But I live in Sacramento California
@AlongForItAllАй бұрын
Our favorite brand of plaster can be purchased here - bit.ly/venetian-plasters . You can also use AFIA10 for 10% off your order. Hope this helps.
@latoshabatiste6423Ай бұрын
Lol why this drink really work I came on here to see if anyone could back up how I am feeling
@leoxfactor98Ай бұрын
G's it's time for work
@antolinsoldadocamps8396Ай бұрын
When adding the pigment to the Venetian Plaster Puty, what is the recommended consistency to mix the pigment and what is the % ratio of pigment per kg of Plaster Puty? THANKS
@AlongForItAllАй бұрын
Great question, but unfortunately, I don't have much experience with mixing pigments. We often buy our plaster pre-tinted.
@antolinsoldadocamps8396Ай бұрын
@@AlongForItAllthank you.
@antolinsoldadocamps8396Ай бұрын
@@AlongForItAllhow long does it take for the first coat to dry?
@AlongForItAllАй бұрын
Depends on the room temp and humidity. If you have the time, I often leave the first coat to dry overnight. If you don't want to wait you can set up some fans and dry it off quicker. Unfortunately theres not an exact dry time I can give you.
@antolinsoldadocamps8396Ай бұрын
@@AlongForItAllthank you that makes sense. I'll learn by my mistakes, best way to learn is by doing
@juanitaroberts62172 ай бұрын
Too much talking
@AlongForItAllАй бұрын
Thanks for the feedback.
@brit50ify2 ай бұрын
chatter marks and inconsistent hand as evidenced by the very dark areas. If I could get a better look I'll bet there were small scratch like marks because your plaster looked a little old, used and dryish after so many passes and scraping it back to trowel. And this was only a small sample board. I hate to see what a cock up a large wall would look like. VP is relatively expensive so you really should do a better job.
@AlongForItAllАй бұрын
I'm sorry to hear you think that. I am self taught and learning more each day. Feel free to find someone else if you don't like my content.
@brit50ifyАй бұрын
@@AlongForItAll And thats the point. You make yourself out to be an expert but you're just a beginner teaching everyone the bad ways you have taught yourself. Laughable that so many think you know what you're doing
@AlongForItAllАй бұрын
You should make a video tutorial since you clearly have a lot of thoughts on this. Can’t wait to learn more.
@tsrlife38182 ай бұрын
What should be used for priming?
@AlongForItAllАй бұрын
For thin/shiny venetian plaster, you can use a normal paint primer. For thicker venetian plaster, you'll want to use a quartz primer as it add a little grit to the wall.
@oladeen12 ай бұрын
Is the plaster ideal for wet rooms?
@AlongForItAllАй бұрын
There is plaster that can be used in showers so it is possible. If you are interested in using plaster in areas that are constantly getting wet, check out the Wall2Floor system Firenzecolor offers.
@isabellastoakes2 ай бұрын
so how did you prime the wall?
@AlongForItAllАй бұрын
You can either use a normal paint primer or a quartz primer depending on what plaster you are using.
@daviddawson25732 ай бұрын
record all these videos again but get some proper lighting this time.
@AlongForItAllАй бұрын
Thanks for the feedback. I do this in my free time for free so it's not feasible to reshoot everything.
@addiejules2 ай бұрын
Hi, i have a brick veneered fireplace that I want to cover using Ardex feather finish to create a flat surface. Do i need to prime that with quartz primer first then apply marmarino ks venician plaster? Or can i skip the primer? Also, if i dont add any paint additive to firenzcolor marmarino ks, would it still have some natural sandy color? Or stark white? Thank you
@AlongForItAllАй бұрын
I haven't tested not priming the feather finish before applying marmario but my guess is that you'd probably be fine. You should test it before doing a large area though. If you don't tint the marmario KS then it's sort of a milky white color. If you wanted it more sandy color then you'd need to add some pigment into it since the base color is white.
@antonioacosta99823 ай бұрын
Before to apply the Venetian need to put base ?
@AlongForItAllАй бұрын
Your base coat can be the same venetian plaster you use for your top coat. Usually you do 2 coats for thicker plasters and 3 coats for thinner. This gives it that nice movement look.
@saren65383 ай бұрын
What is she using for the colours ? Is it pigments mixed with water ?
@AlongForItAllАй бұрын
We get our plaster pre-tinted.
@belitega3 ай бұрын
My KitchenAid its the same and The planitary has come down 😢 help
@MarielaBustamante-dv8le3 ай бұрын
Can I do my ceiling with this Venetian plaster how can I make it look like a shine grey and white marble
@AlongForItAll3 ай бұрын
Yes, you can do your celling with Venetian plaster. You'll need to prep the celling the same way you do any other wall before applying. To make it look like marble, you'll want to use a fine Venetian plaster like Grassello Fino which you can find here - bit.ly/grassello-fino . To add veins to look like marble, you'll need to get multiple colors and use a brush or small trowel. This method is very artistic and can take some practice so my recommendation would be to practice on some boards first so you are comfortable and are happy with the look first.
@josephgonzalez94643 ай бұрын
Where did you order the parts from??
@AlongForItAll3 ай бұрын
We ordered them from amazon. You can find this specific gear here - amzn.to/3FOYFHh but make sure to look up the exact piece you need for your machine.
@sannydee3 ай бұрын
I know yall bought this review. This frao tastes bad. As a. Teacher I saw the drink name and thought. I’d try it. It’s bad.
@AlongForItAll3 ай бұрын
It's all personal preference. Some people like the taste others dont.
@macarenavidalharris22703 ай бұрын
Hello! I want to know where do you buy the replacement part? Because the hinge that is on the back of the stand mixer it is cracked and very loose so I want to change! But the official service said me that they have to take the mixer an make a diagnostic of it. I think it is not necessary! And I only want to by the part
@AlongForItAll3 ай бұрын
We bought our parts on amazon. You'll first need to look up the part numbers for your specific machine and then google where to buy it. Not all parts are available on amazon but it's handy when they are. We've had good luck ordering from www.repairclinic.com as well. They then to be a bit more expensive but sometimes it's all thats available. Good luck!
@rebeccariley77434 ай бұрын
Thanks for the informative video! What happens if you only chose to do one coat of plaster?
@AlongForItAll3 ай бұрын
If you only do one coat, it won't have that layered movement look of venetian plaster. The second coat also gets compressed into the first coat, closing a lot of the pores of the first coat. This allows the finish to look really nice and clean vs rough. You could definitely apply a single coat if you like the look, but traditionally venetian plaster is a layered process.
@HeyJudeDontBeSad4 ай бұрын
Thank you for this! Trying tomorrow for my first time and this is the best tut I have seen. Appreciate it man!
@AlongForItAll3 ай бұрын
Thanks! Glad it's been helpful
@elaynasimmons98594 ай бұрын
Hey do you have any idea I’m getting black marks on my first coat? Is it from working it too hard??
@AlongForItAll3 ай бұрын
So, it can be for multiple reasons. If you are using a lighter venetian plaster, you are more likely to get visible black marks from the trowel. This could be from the quality of the trowel, or because you're pressing too hard. Typically what I recommend, although it's expensive, is to buy a trowel thats treated not to leave black marks on plaster. amzn.to/3QISXvX Our favorite is the x-trowel. This is the easiest way to avoid it, but if you have a decent trowel, you can practice. Hope this helps.
@elaynasimmons98593 ай бұрын
You are the absolute best!! So here’s another question- I’ve now “finished” my range hood and I’m pretty darn happy with the end result. I just figured I wouldn’t be able to burnish it because I went through like 10 trowels and all left black marks when practicing. I haven’t sealed it yet…is it too late for me to burnish now that’s it’s been dry for days??? I hate to add another layer because it took so long to get the look I even got now. I hope this makes sense?!
@AlongForItAll3 ай бұрын
@elaynasimmons9859 unfortunately, it is too late to burnish. If you like the current look, you could also just move directly to put a sealer on it. I’d recommend getting something that can handle being washed and around food
@courtneycox56744 ай бұрын
Do not attempt this. Try to use a Authorized Service Center. (I work for one) Parts are cheaper and techs can find all the issues for a 1 tine fix. Plus we have offical KA grease
@AlongForItAll4 ай бұрын
It's just a cost thing. If it was cheap to have a service center fix it, then I would have done it. I saved a lot of money by doing it myself.
@susanstanley64704 ай бұрын
This is a useless uninformative video. Waste of time
@AlongForItAll4 ай бұрын
This wasn't made to be a tutorial
@samuelrobertson83544 ай бұрын
What would you recommend for venetian plaster as a backsplash? We have read water based sealer... acrylic sealer or something would be suitable.
@AlongForItAll4 ай бұрын
Firenzecolor has a Wall2Floor system that is good for high level water areas. This might be something you look into. If you don't want to do the complete system, I believe you can use the sealers from that system over your plaster to get a similar waterproofness. Feel free to use our code AFIA10 for 10% off if you decide to order from them. It also might be worth sending them an email to discuss your exact project needs.
@saimanomi27834 ай бұрын
Sir I have small paint industry Good job
@AlongForItAll4 ай бұрын
Thanks!
@janicealley50334 ай бұрын
Looks amazing
@AlongForItAll4 ай бұрын
Thanks! Glad you liked it.
@daviddawson25734 ай бұрын
which creates a more matte finish, VP Suede or Marmorino?
@AlongForItAll4 ай бұрын
These two are very close in my opinion. It really comes down to how you apply them. If you don't add very much compression, both of them can be matte. I would say that VP suede might have ever so slightly larger aggregate (wouldn't be able to tell unless you look extremely close) This could possibly lend itself to more of a matte look but again, hard to say. I think you'd be happy with either of them.
@raj0802885 ай бұрын
Could you have not used bees wax as a protection layer to the plaster?
@AlongForItAll4 ай бұрын
Some people do. I've never tried using that though.
@studioca-uo9dr5 ай бұрын
Yes, so helpful. Thanks for sharing ‘mistakes’! 🎉 especially #5 😅
@AlongForItAll5 ай бұрын
Glad it was helpful!
@manojparmar77125 ай бұрын
Hmmmm where did you learn that burnishing style…? 😂
@AlongForItAll4 ай бұрын
I'm self taught. Always learning.
@Bah8365 ай бұрын
Such great toturial video appreciate it your a great man ❤
@AlongForItAll5 ай бұрын
Thanks! Glad you liked it!
@andreacamp53365 ай бұрын
I used a feather finish on my fireplace as my first step, and found that it was easier for me to use a 4 or 6" joint knife rather than my rectangular trowel and it turned out great and am tempted to leave as is except that we don't want the grey color so we will use Firenze Marmorino KS tinted to our taupe color. 1) Can I use a 4" or 6" joint knife for the venetian plaster and get the same effect that you are doing, or will it have too much movement? I hesitate to put money into a trowel that I may not be able to get the hang of. 2) How do you avoid the black marks that I got when I burnished my feather finish? 3)Do you have a video on how to do an outside corner smoothly? Thanks, your videos have been great help!
@cookiedough87785 ай бұрын
What kind seller need
@FELINA-es9ej5 ай бұрын
Great video, I just have one question, where do I buy the materials for this type of work?
@AlongForItAll5 ай бұрын
You can buy the materials at Frienzecolor here - bit.ly/firenzecolor-home You can also use code AFIA10 for 10% off your order!
@guitart49096 ай бұрын
Can you overburinsh? How do you take on outside corners?
@AlongForItAll5 ай бұрын
Yes, you can definitely over burnish. You can burnish good Venetian plaster pretty far, but still wouldn't recommend it. If you want sharp outside corners, just scraping with a putty knife works well to maintain the edge. If you want it rounded, getting a plastic bullnose tool is probably your best bet.
@guitart49095 ай бұрын
@@AlongForItAll after I burnish, I notice a few corners that aren’t very crisp. Can you just smear some plaster on, let it dry and then sand to form a crisp edge?
@AlongForItAll5 ай бұрын
If you've already burnished, it might be good to lightly sand the plaster to open it back up a bit then work on redoing the edge. Often times what I'd do, is make sure I have a decent edge on the first coat. If not, I work on fixing that edge and then sand it down prior to my second coat and burnish after that.
@christophercook97456 ай бұрын
the best venetian plaster video on the internet ! thankyou very much
@AlongForItAll5 ай бұрын
Thanks! That means a lot!
@christophercook97456 ай бұрын
very good thankyou
@AlongForItAll5 ай бұрын
Glad you liked it!
@desireevil6 ай бұрын
What color did you tint it or is that the untinted?
@AlongForItAll5 ай бұрын
This was pre-tinted sample pIaster received to try out. You can order this plaster untinted. I believe it will end up being a slightly warm milky color but I've never tried it. If you are wanting a crisp white color, often times they will add a bit of blue. They can color match to pretty much any paint color chip.
@ashleighhall06 ай бұрын
Alright. Got Modern Masters plaster (not sure if you’ve used), followed a brand/tinting tutorial I found elsewhere. I “finished” 3 days ago, 2 coats, on a plain white wall. The intended color and color in the bucket and tools is very light, almost an off white. The color on the wall, 3 days later is very warm and looks like Grey Poupon. Doesn’t seem prematurely burnished as there’s zero shine (didn’t want shine). I have not sealed yet as I wanted to make sure it was fully dry but, why is it that color?? We also did a mantel like yours from the fireplace video (thanks for the inspo) but more so just layered it on, didn’t care so much to have a certain finish outside of it being uniform and that color is a 10/10. Do you think the dark wall just needs more drying time? Thanks!
@AlongForItAll6 ай бұрын
It’s hard to know without being there to see. Typically plaster will go one darker when it’s wet and dry lighter. If you noticed a general lightening up, then it’s probably the color it’s going to be. Hope this helps.