I think it can also be pronounced 'Model-ee' as a nod to being produced in Wales. 😊 A nod to Welsh language.
@VauxhallRailfan7 күн бұрын
Excellent job on that! looks amazing! just a question, do you NEED to prime it before you paint it or can you paint it straight away without primers?
@user-ri4qi9lv1p8 күн бұрын
Do you need to seal the paint and powders with a varnish? Thanks
@fexploder328113 күн бұрын
Well, congratulations! You have basically made a coat of prime that makes this body look like Devious Diesel from Thomas the Tank Engine in this video.
@Its-kate5624 күн бұрын
It remains me of her in 2016 when she returned to steam and I dons mind it
@stephengleeson1263Ай бұрын
I hope my first attempt come out this well. Thanks
@edwardshirley9314Ай бұрын
You've accidentally left the radio on in the background.
@gppsoftwareАй бұрын
One of the problems with this approach is that it doesn't facilitate any sideways adjustment of the track position - the droppers physically prevent it. If you run the droppers out to the side of the track, you get provision for adjustment. Most people run a single bus on an end to end layout, but the fact that you have two gives you the opportunity to connect them together at each end and create a ring. This would have the benefit of equalising electrical load across the entire layout and is the same reason ring mains are used in UK homes.
@cuebjАй бұрын
Got this from googling 'platelayers'. My great grandfather was a platelayer in 19th century. Living in Moulton, Cheshire, I guess that would have been the London and North Western Railway between Crewe and next station northwards. He had 13 children in a 2-up, 2-down that opened straight onto the street and nextdoor was an abattoir. My maternal grandfather was youngest. Three brothers killed in WW1 and on the war memorial. Grandpa was born in mid 1890s and served the full 4 years of WW1. He remained a private as that was safest with officers and NCOs targeted first by enemy and he couldn't afford taking time out for training because his elderly mother depended on his wages. A gruelling job and a hard life. For survivors of WW1, there were plenty of opportunities for work and he moved to Liverpool where he became a policeman and rose to Deputy Chief Constable leaving the heavy outdoor work of platelayer behind. He re-enlisted in WW2 as Lieutenant Colonel in Military Police and landed in France D-Day +2 in charge of re-establishing civil order. Mum was furious with him as his going back to war meant she couldn't leave her mother and she stayed in Liverpool as a nurse instead of adventuring overseas as a WREN or similar in Army or Air Force. But that background had its long-term effects and he and Granny died in their mid 60s in Feb and Mar 1961, a few weeks before we (Mum, Dad, me, 3 younger siblings down to newborn) came to settle in England after post WW2 in Northern Nigeria.
@MerryMac1000Ай бұрын
I really enjoyed watching your video and it has inspired me to try this myself. I have been painting Warhammer for decades but with the price hikes i can't justify it anymore. These look like great fun. What scale was this figure? It turned out beautifully, i don't understand why people dislike painting in highlights, at smaller scale you cant get a realistic highlight anymore with actual light sources and need to cheat by painting them in yoursel to make it look more really in-scale.
@paulruiz4778Ай бұрын
Is a 1/64 scale figure?
@stephenspinks6486Ай бұрын
I think I take that up as I don't have an airbrush
@gerlandkent63772 ай бұрын
[thank, you for youre great video]👍
@shakeyhandsshedmodelrailwa24942 ай бұрын
i used to live near a plant that recycled barrels , it was next to our local river we used to knick barrels and build rafts in the summer happy days
@shakeyhandsshedmodelrailwa24942 ай бұрын
you'd deed 1000s to re create it , ever thought of making blocks of stacked barrels for such yards like chemical companys and truck loads etc
@1977ajax2 ай бұрын
Was fairly interested to watch, but had to click out because of the damned music. Once again, more is less.
@dundasjunctionmodelr.r-jam82672 ай бұрын
Looks fantastic, I only nailed my track no glue , going to subscribe your channel
@dalipparmar61342 ай бұрын
Being a novice, very well explained, nice clear explanation and video.
@chrisuddin97603 ай бұрын
Are you supposed to put a matt varnish on first before you do any weathering so that the paint you're putting on will stick to it then when you finish your weathering reapply a coat of matt varnish?
@bobtudbury85053 ай бұрын
i hear it was so good, BR scrapped it !
@PeachyTT1203 ай бұрын
Nice work. Will you do one of these videos in a smaller scale?
@erikschmidt4763 ай бұрын
Would you also use your rust technique (with the thiner) on spraypainted surfaces (fully dried)? Or would that make a mess? I'd like to paint my bridge green first. Thank you for the video!
@BuntersYard3 ай бұрын
Oil paint thinners wouldn’t have an effect on acrylic or enamel paints so safe to use on painted surfaces….. except green!! ( nah just kidding!) Best to let the paints dry fully and you’re good to go 👍🏼
@erikschmidt4763 ай бұрын
@@BuntersYard Thanks!
@Andrew-zw9fi3 ай бұрын
It is amazing the man can make a beautiful machine the out last himself, but yet keeps on serving humanity !
@wallycustard12813 ай бұрын
Dee-cal is the American pronunciation. You should be saying deck-call (the English pronunciation.)
@IanJamesLittleford3 ай бұрын
Superb!
@tezza72uk493 ай бұрын
Thanks, this is very helpful . Is it always best to give a final coat using the polyurethane varnish after using the acrylics to add durability ?
@BuntersYard3 ай бұрын
Yes. If it’s likely to be handled then a varnish will give it protection 👍🏼
@mattseymour86373 ай бұрын
Great weathering! What paints did you use in the airbrush for the roof and creating the faded paint look?
@mattseymour86373 ай бұрын
Some great weathering! What rust weathering powder are you using in the video?
@allanford97313 ай бұрын
I'm not a model railway builder but, I've used similar methods on 1/72 aircraft like the PBY Catalina and Lancaster to achieve a faded, patchy black finish. Works very well though I used a pale grey instead of white. I don't have an airbrush either
@michaelwhiles52823 ай бұрын
Looks like an EV 😎
@dibsyardshuntinglayout3 ай бұрын
I'm glad you provided extra numbers of the hinges and catches.... Because I have just launched one of the catches into the stratosphere.
@cuebj3 ай бұрын
Astonishingly quiet audio. Got my extension speaker at max volume but signal from the laptop must be very weak. Having slightly suboptimal hearing but hearing aids don't help, this is difficult to listen to. I need it for painting Flamme Rouge board game figures
@corjansen19584 ай бұрын
Very well done, Nice color scheme too.
@BuntersYard4 ай бұрын
Thank you very much!
@dibsyardshuntinglayout4 ай бұрын
Very nice! That will suit well on the new sidings module.
@Trucker3404 ай бұрын
This is absolutely amazing. Just bought a rake of 15 tankers. What is the last bottle you use please....the grease/oil.
@BuntersYard4 ай бұрын
Thank you. It’s AK interactive Shaft & Axle Grease. They do lots of other shades - oil streaks, grime etc Good luck with your rake
@Trucker3404 ай бұрын
@@BuntersYard thank you so much. I'm new to the hobby. Although done plastic model kits for years. Haven't got round to trying powders yet. What's the best thing to seal powders in... Would a matt varnish work well?
@BuntersYard4 ай бұрын
@Trucker340 yes, a Matt varnish. I now use AK Ultra Matte which is premixed and very matte indeed. First coat very light ( don’t wash the powders off 🥴) and then a second coat
@Trucker3404 ай бұрын
@BuntersYard That is a great help. Again.....thank you so much. Great channel BTW. Very helpful and informative. Keep up the great work. 👍
@TheSteambuff4 ай бұрын
What pen did you use for the chalk markings.
@BuntersYard4 ай бұрын
This is the pencil that i use: amzn.to/49rjcy1 Thanks for watching
@johnjee16274 ай бұрын
brilliant job youve given me a great idea to buy some old farm vehicles that are chipped and tyres missing from our local toy fair, to practice on,
@viriconiustheengineer83544 ай бұрын
Are those generic spouts or do they come with a particular superglue brand? I find normal nozzles far too unsubtle for dispensing and a needle doesn’t pick up enough from a small drop of glue
@BuntersYard4 ай бұрын
They come in packs of 100 on Amazon for around £3. So I can afford to throw one away each day, and a pack will last for about 4months 😊
@dibsyardshuntinglayout4 ай бұрын
A brilliant model. I'm definitely reserving a space for one of these in the new module.
@BuntersYard4 ай бұрын
Thats great news. I look forward to seeing it on the layout
@dibsyardshuntinglayout4 ай бұрын
@@BuntersYard just need to have time to build the baseboard first. Was supposed to start in January.
@WarwickPete4 ай бұрын
Splendid end result! I’m about to start on my first laser-cut kits, so the advice and tips are most welcome
@BuntersYard4 ай бұрын
Glad it was helpful!
@edenbridgejunction75264 ай бұрын
Hello Dave. I've just received my cabin along with the maintenance platform for my yard. 😊 going start building later on and I'll come back to this video if needed 👍
@BuntersYard4 ай бұрын
That’s great. Hope to see it in a video soon I’m sure you won’t need to refer to the instructions as it’s pretty straightforward, but thought I’d make the video just in case 👍🏼
@edenbridgejunction75264 ай бұрын
@@BuntersYard the vid is a good shout mate especially for those new to the hobbie. As you say it's a simple build so I know I'll be alright 👍😁 it's nice to have another piece of your work on the layout. 👍
@edenbridgejunction75264 ай бұрын
@@BuntersYard I've just done the maintenance platform as it was a quick build. Painted and weathed too . Iam posting some pics of it on my community page if your interested on what I've done with . 👍😁
@BuntersYard4 ай бұрын
I’ll take a look 👍🏼
@dibsyardshuntinglayout4 ай бұрын
That is an awesome kit! Ideal for any modern image layout.
@BuntersYard4 ай бұрын
Thank you. These buildings are have been around since the 70’s so would fit on lots of layouts
@robturner31174 ай бұрын
Portocabin was formed in 1961 so could be on any layout from that period would make a nice MPD office
@dibsyardshuntinglayout4 ай бұрын
@@robturner3117 ooo even better!
@TeresaTrimm4 ай бұрын
I find that I learn better by teaching others (writing about it) also.
@BuntersYard4 ай бұрын
Yes, it helps to fix it firmly in the mind
@stoneridgewoodland93884 ай бұрын
Do more n gauge. That’s sound.
@BuntersYard4 ай бұрын
I'm hoping to do more very soon
@danielbrooks34525 ай бұрын
Why two bus wires? Why not one in the middle and add the droppers to it
@Marienthal19565 ай бұрын
nice :)
@BuntersYard4 ай бұрын
Thanks!
@burgermaster4u25 ай бұрын
Quick question..do you add anything on top of wagon to seal weathering powder etc? Thanks for sharing...love it will be back….👍
@BuntersYard5 ай бұрын
Sometimes. If it a wagon thats going to be handled then i'll use a matt varnish. One light 'dust' coat and then another coat when its dried. If you apply the first coat too heavily you can wash the powders away.
@burgermaster4u25 ай бұрын
@@BuntersYard oh..thats great thank you for the help and Advise much appreciated..oh last question ( promise lol) do I add. Anything to the varnish….ie finners.water etc….or just add straight from the bottle….👍
@edwardspence42835 ай бұрын
Just starting out that’s very helpful thank you so much
@BuntersYard5 ай бұрын
Happy to help!
@keithgilham94385 ай бұрын
What yellow are you using?? Anytime I try paint yellow over black it literally just fades back to nothing
@BuntersYard5 ай бұрын
These are vallejo model color. (The Air versions are too thin to cover). Best idea is to paint the part in white first, and then yellow once its dried
@andybiggs98005 ай бұрын
It would be really useful to give advice and examples of how to paint MDF models and kits like this. What paints? Order? You mention about leaving the windows out for painting but then glue them in. Then how to weather the finished painted model. A poorly finished model does nothing to promote a kit, while a well finished one will have people knocking at your door.
@BuntersYard5 ай бұрын
That’s a fair comment. On some of the other build videos we included paint schemes etc but if people were following along as a build instruction the concensus was that they just needed to see how it fitted together I’ll have a rethink and see if I can find a happy medium. Maybe a paint guide as the second half?
@dibsyardshuntinglayout5 ай бұрын
@@BuntersYard or just a separate video on how to paint it?
@dibsyardshuntinglayout5 ай бұрын
Wow, that is a nice looking kit to build. Clearly a lot of thought gone in to how the builder will build it. Realistically, it's one of the better if not best I have seen. I have one from LCut Creative, and it does really not very nice to build. Practically zero instructions too. In fact it's still in the box as I can't face building it. Will definitely consider one of yours if you do them in 4mm Scale one day.