so did you put both positive cables into the terminal? it's hard to tell.
@aaronh5343 күн бұрын
What if there are two wires that connect to the terminal?
@SCPlayz70003 күн бұрын
@strangegarage my dad's a mechanic he'll love this 😂😂
@terminsane6 күн бұрын
Great job on the wiring. Im looking for some ideas to clean up the rats nest I got going on.
@terminsane6 күн бұрын
The steppers have 4 wires, one pair for each of the two coils inside... Coil/pair AA & coil/pair BB. You can find the pairs by disconnecting the motors, short 2 of the wires, then try and turn the motor by hand. If the motor is harder to turn, those two wires are a pair. (Either AA or BB) They should always go side by side. If you want to reverse the direction of the stepper, you can swap the two pairs around. EG: AABB or BBAA. But never wire them ABAB or BABA. It doesn't matter which wire of the pair goes first. Just that the pairs are together.
@sassy_sasarai40909 күн бұрын
Thank you
@user-qj7ku8xc5k10 күн бұрын
This is the EXACT same truck I have. Same Year, engine, color, and everything. I'm having the same problem. I already replaced my coil packs and it's doing better but not quite great yet. I'm truly hoping my issue is only sparkplugs as well
@d.t.607212 күн бұрын
Who would have thought a helmet that keeps a dog from biting themself would save its life in another way. 😮
@B1rd-L0ve14 күн бұрын
Does it still work after tho?
@StrangeGarage14 күн бұрын
@@B1rd-L0ve yes, shake it and it goes back to normal.
@B1rd-L0ve14 күн бұрын
@@StrangeGarage thx, I tried it and it’s so cool, it took me like 2 hours but it only felt like ten minutes 😅
@brodyk690414 күн бұрын
I heard you can screw the mig tip off too, because there isn’t any need for it bc no gas. Is that true?
@rebelchamorro14 күн бұрын
How thick was that metal you were working on? Do you have it connected to a 20amp outlet? I just bought a similar HF welder and I'm constantly flipping my breaker right when it starts to get hot enough to penetrate 3/16"
@reid151017 күн бұрын
Theoretically you could just swap the 15 amp fuse with a 30 amp fuse no??
@StrangeGarage15 күн бұрын
@@reid1510That's correct: it would work until the wires melt and your car catches on fire.
@reid151015 күн бұрын
@@StrangeGarage ah no big deal I had subwoofer wires rated for 400 rms hooked up to a 40 amp fuse and a 1400 rms amp that’s sketch man 🤣🤣
@andrewg156119 күн бұрын
Thank you my mechanic said it would cost me a blow job but this got the job done 🙏 thank you so much
@Thepowerof219019 күн бұрын
Bro spending 8 hours doing this and got 998 likes Your video is cool this has to blow up!
@LLoyoc22 күн бұрын
Hey, just wired the air horn as you suggested. It doest work. Do you think it's possible i blew out the factory horn fuse?
@d.t.607222 күн бұрын
I needed this video, but subscribed because this WORLD TRULY IS A STRANGE PLACE. 🥴
@user-cb4vv4yw4q24 күн бұрын
احب هذا الطفل الصغير
@getoffd33znuts25 күн бұрын
Great video! I immediately knew my welder had another issue, but still watched your video to the very end.
@PerfectMessProductions27 күн бұрын
Thanks for teaching us brokies cuz i don't have great tools or tons of money. I'm now subscribed
@PerfectMessProductions27 күн бұрын
Definitely saved me money
@danielstein832028 күн бұрын
Nice video. Plan on making signs from skid planks. I too have a cnc. Keep in touch with me. Just picked my planer from HF. Dan
@michealfigueroa632529 күн бұрын
"Radio Flyer" Realy Sad...
@Tinfoil.Hatter12 күн бұрын
What can YOU show us you've made?
@michealfigueroa632512 күн бұрын
@@Tinfoil.Hatter Sure A HOE come by and I'll show you lots Evena a real"Radio Flyer" Not some ones bull shit dream
@michealfigueroa632512 күн бұрын
@@Tinfoil.Hatter Sounds like a challenge A HOE some come by and I'll show you lots of stuff even a real "RADIO FLYER" not some pipe dream
@michealfigueroa632512 күн бұрын
@@Tinfoil.Hatter You had something to say??
@Tinfoil.Hatter12 күн бұрын
@@michealfigueroa6325 refer to previous post
@paymeindroАй бұрын
Thanks, appreciate the help! 🤙🏽
@CaptnCramponАй бұрын
Thank you! I bought a barely used CE 125 for new muffler bracket install and small projects. I heavily debated upgrading to Titanium 125 afterwards with 25% coupon and you just saved me some cash. Lot of folks saying CE 125 won’t do as good a job but all CE 125 vids show it’s a decent welder for weekend garage guys like me. I’ve run several practice welds with it and it’s totally solid. “It’s all about the puddle”. Thanks SG!
@MartiArtisanАй бұрын
Do you think this welder can handle 1/4"? I know that it isn't rated for that originally
@tyronfisher9623Ай бұрын
I just brought a new starter, battery, and refurbished the alternator my car comes on with jumper cables but once they come off the car stalls in 5 seconds do you think it might be the loose terminals
@alcolavista-22Ай бұрын
Awesome job..Luv the sound
@californiadreamer5968Ай бұрын
Thanks. My positive terminal won’t tighten down and I was freaking out because I knew I wouldn’t be able to squeeze hard enough to put on a new one like the factory connection. Your video showed that I won’t have to. Thanks for taking the Boogyman out of it for me. (66 yr old grandma) On my way to the parts store. Thank you!
@tomwinningАй бұрын
Can someone link me up on how to get a fire truck horn ? And is it hard to put on its own switch ? :) cheers 🇦🇺
@ElishaColas-LafimeeАй бұрын
I know how it feels
@brunoarambula9895Ай бұрын
So the 125 amp should have more penatration right? Good video by the way
@betov.ornelas5482Ай бұрын
Can damaged terminal be causing my battery light to come on?
@StrangeGarageАй бұрын
Absolutely, yes.
@mastersarge4429Ай бұрын
What if i am trying to wire a train horn with my factory horn that is activated by the factory horn button located in the steering wheel. But i want a toggle switch to be able to use either the factory horn or train horn
@Tianfangwang-dm6kmАй бұрын
Guys don’t try it took me an hour……to fill in a quarter of it
@StrangeGarageАй бұрын
Yeah it took a long time for sure. It works though.
@B1rd-L0ve14 күн бұрын
@@StrangeGaragedoes it still work after?
@user-uk3ce2fy5wАй бұрын
I’m a 98 year old retired fisherman, thank you for making it so easy. My mechanic quoted me $175 plus $33 for parts. Thanks again
@user-yy5wm2sn6eАй бұрын
Do u really need to cut it ?
@Makl2000Ай бұрын
I'm by no means a pro welder, hell I've only welded a couple times, but it goes to show that even a little bit of prep work (bevel) makes a whole world of difference.
@jamessutlick4694Ай бұрын
I have the harb.fr.campbell-Hausfeld can you show changes inside to go reverse polarity?
@indiankite7358Ай бұрын
Sounds good!
@creationzthruair834Ай бұрын
This was great thank you. Only thing is, what about that relay switch that comes with it? What's it for?
@Nathaniel-bw5mbАй бұрын
My 1st bike was a 1980 Honda XL 80 .... GOT IT ON MY 13TH BIRTHDAY IN 1980....
@user-ox6nc6ly7fАй бұрын
beewax and heavy oil mix(manual transmission) solid, soft and slightly sticky. stays on drill bit and flow when heat up. for diff, saw dust and oil. nothing that can dry. veg oil on stainless flows better than mineral oil.
@stevearttus8164Ай бұрын
If I had ever tried drilling through 1" stainless with a HSS bit.... I'd still be drilling....😂😂😂
@iscatonrecords4712Ай бұрын
Bro that intro was great 🤣🤣🤣
@StrangeGarageАй бұрын
It's funny, because I was super irritated when it happened 🤣
@2head32Ай бұрын
I bought the wolo Dixie horn wiring isnt my issue its finding a spot for 5 horns and a compressor 😂
@kiskaesarutobi7371Ай бұрын
Much appreciated 🙏🏾
@Yves95128Ай бұрын
I just had good experiences with HF. Years ago I needed a reciprocating saw for a small project in my bathroom remodeling, I paid $29 for this rather ugly dark red thing, not only it did the job but it's still working after years of abuse, old hard redwood, thick nails, tree branches, steel square tubing, the thing won't die. I also got a rotary hammer drill (small jackhammer and concrete drill), same thing, $80, perfect. An other example is a drain shovel (narrow shovel), great strong steel, fiberglass handle (much easier to dig for planting stuff in the garden than a regular shovel), $14 compared to $45 at HD, and I got junk from HD, I broke a (digging) pick, bent weed fork, ... I wish HF would sell material too, the orange store has almost the monopoly on house projects and they price as they wish. I'm thinking about getting this planer, deciding if I really need it (it would take space in my shop). Thanks👍🏻
@titanniki4122 ай бұрын
What do u do if u cut off 2 much insulation? Electrical tape? Does it matter which terminal u do 1st?
@user-cm9ls4hx4n2 ай бұрын
Where did you get the larger horn?
@user-ge3ed7bp8t2 ай бұрын
What amp is that inline fuse you installed, 15 amp or 20? What brand is it?