Wrong way Foreigners should lose their drivers license
@user-jz2bp5mu8bАй бұрын
Dirt dobbors nest brown wasp
@paul9142 ай бұрын
You need a mercury vacuum gauge and a glass plug to set them up right if you have split and dismantled them. Honda advised not to split them and just clean .
@Andywiththespanners7 күн бұрын
I always try to keep them together unless you have to get in there, like if the link pipes are split between carbs etc
@noseyparker0002 ай бұрын
Is this the same system as my 2000 vfr800?thanks
@Andywiththespanners2 ай бұрын
Probably very similar given it's the same era.
@tonymartin37803 ай бұрын
Music is toooo high can’t hear you 😮
@m.s.dpropsbristol73575 ай бұрын
remember this bike well watching you race at avon park raceway
@c-311006 ай бұрын
Why this so called music????😢
@Andywiththespanners6 ай бұрын
Don't worry, it's going to be gone on the next one!!
@zzzarybaxz6 ай бұрын
kzfaq.info/get/bejne/f8xhrKZzkr-vZYk.html
@davidledford35226 ай бұрын
The music is annoying
@justineaster46826 ай бұрын
I bought and still have an HDI Diesel 2 litre and love it. At 163 BHP its too tame and definitely requires a re-map which results in 200 BHP. The difference is considerable. Also I had the break callipers properly painted. The wheels were in good condition but they will get shopped in two weeks for a powder chrome job. Always keep an eye on tyre pressures and oil level - I mean weekly. I also had the gear box oil changed at the time of purchase. If you look after them they go like a small train and are fantastic on the motorway - quiet with good fuel consumption. Its a fun practical car with great lines. They are a hard ride and do not tolerate potholes. You will be into new springs if you ignore this... pick the best line! What a great car -
@SpecialisedMotorcycleTransport6 ай бұрын
Ah thanks so much for the shout Andy I appreciate you..
@rolandnewbold53397 ай бұрын
Hi there I've got a 850 engine for sale 26000 but it was rebuild about 10 years ago but engine all ways in side though I just give you a nob .yours rat nice bike
@garthharry33497 ай бұрын
Its a wasp nest buddy
@iErnesto947 ай бұрын
I just bought an rcz HDI as well. Im a begginer with modding a car so im excited to see what you will do :). Hopefully I will be able to recreate some if the thibgs you will upgrade 😅
@Flavio_rcz6 ай бұрын
kzfaq.infoLcKaSF-w5JI?si=t7_JCgcCPN3ACZZW
@briankidd447 ай бұрын
DEFO ditch music.
@user-gb2qo4my8y7 ай бұрын
Videos are much much much better without shite music we want to see you fix the Honda not this bs musical.
@user-gb2qo4my8y7 ай бұрын
Jib music
@TheDocrick7 ай бұрын
The second bike was an 82? should be called 70-80'''s bikes. Cmon man
@Andywiththespanners7 ай бұрын
Well done on spotting the deliberate mistake
@richardhayward46437 ай бұрын
4 out 5 bikes right and 1 year right I like the quiz though
@varmintmaster7 ай бұрын
Front brakes : upper bleed valve front left then upper bleed valve right side. Rear brakes: right side front caliper centre bleed valve then left side front centre bleed valve. Then go to rear caliper centre bleed valve. Lastly rear caliper outer rear bleed valve . That's the sequence from the workshop manual .
@ibaneze66667 ай бұрын
if its the 2litre diesel getting it chipped to 200bhp ,the twin exhaust tips are fake,you could allways get a cat back sport exhaust made up,
@Andywiththespanners7 ай бұрын
Yep it's the HDI so chipping it could be a winner 👍
@MichaelandCathy19997 ай бұрын
I owned an ‘83 CB900F Super Sport back in 1990 , the silver/grey and blue editions. 1 of the best sport/tourers ever I had. Had the greatest experience on my very first “my money” bikes when I bought a brand new 1976 Yamaha RD400c.
@warrensykes1937 ай бұрын
Full choke no throttle.
@raykirchdorfer54527 ай бұрын
Your background music is to loud, hard to hear you talking
@Andywiththespanners7 ай бұрын
Thanks for the feedback, I'll sort that out for future videos 👍
@littlepippin84457 ай бұрын
I love my GT200. Might keep it standard though 'cos apparently these are a nailed on future classic ?
@GabrielSTEFAN9437 ай бұрын
Mate, how can I message/email you ? I'm an RCZ fan and I could help you with the best price on parts, original aftermarket or even second hand. Thanks
Don't worry, the next episode will cut the music out! I always listen to the feedback, thanks for your comments.👍
@ianlevy87657 ай бұрын
Great to follow along on this, one of the best bikes ever built. If I may, do not feel that you have to add music to the vid, it is sometimes a pleasure to just watch proceedings. Thanks again, Ian
@theoriginalracingsnake7 ай бұрын
I had one back in the day. Terrible handling, worse brakes. It was pulled out of a mates of a mates shed, and was my first big bike. No licence, insurance, tax or MOT, I rode it for 6 months getting away with it until my stupidity and neglect killed it. I eventually got legal, and always fancied another but sadly it was never to be. Will be following this along as it'd sit nicely with my other two bikes.
@Andywiththespanners7 ай бұрын
Thanks for the feedback I'll cut back on the music for the next episode 👍
@ianlevy87657 ай бұрын
@@theoriginalracingsnake absolutely correct, they never handled well at all. I should have said best looking, specifically the F2 Bol.
@jimsmith18567 ай бұрын
Hi andy just a quick question: Are you fucking deaf?
@davidanderson45007 ай бұрын
ditch the background music andy
@theoriginalracingsnake7 ай бұрын
100% it is horribly distracting. Not required. It is like some terrible 1980's theme tune for some dreadful B rated daytime soap, but it goes on and on and on and on, unlike the theme tune which is still awful at just 20 secs.
@Andywiththespanners7 ай бұрын
Thanks for the feedback the next vids will be better.... I'm learning I hope!
@DanielSimpson-ci5dx7 ай бұрын
How is that necessary when it needs cleaned anywsy..it's turning over it will run....
@beniaodessckiy33967 ай бұрын
Дурни,могут хотябы проверить свечи и почистить контакты трамплера?...
@kevinquinn58778 ай бұрын
Stupid music
@richardbrown18958 ай бұрын
Wasp nest, clay masters 🐝
@user-fu2xj6uy1l9 ай бұрын
sir i cannot believe ive found this c hannel ive owned cb 900 f1 1981 kwak z1000 eddie lawson rep thati built my self ive been building 40years please carry on mate thank you
@Andywiththespanners8 ай бұрын
There will be a new video on the CB900 coming very soon, it's the next one in the workshop to get some love
@_MD809 ай бұрын
What about the fact that family nearly got wiped out
@brianprimett562014 күн бұрын
Very lucky
@matnaylor89399 ай бұрын
Great bloke at that bike dealers ,forgot his name but bought a xlch off him from New York she was a dirty old girl rough around the edges but am getting there 👍.
@robertadams44159 ай бұрын
It is a muddwasp nest
@seanogradyfineart9 ай бұрын
Surprised its got starter motor left!!!
@Andywiththespanners9 ай бұрын
We do check that the starter isn't getting too hot but you're right, it's a concern
@petethemod110 ай бұрын
Speechless, i am presuming they were either drunk or high on something? The woman walking with her kids was very lucky. We could easily have been looking at life changing injurys if not a fatality if the car had rolled onto them. As a fellow blackbird owner, i hope the bike is repairable. That`s if you still have the desire to go through all that hard work again ?Which i hope you do....
@scubari10 ай бұрын
Just like my girl,black and shiny 😎 Like'd the video,keep em comming 👍 btw, friendly tip,tune down music or get rid of it all together. Peace
@sydders6510 ай бұрын
I remember that build and that days filming, a whole lot of fun right there!
@PoppaOn211 ай бұрын
Dirt dauber nests and from the color of the "dust," its southern red clay from southeastern U.S.
@johnnyrvf11 ай бұрын
How did the std HYVO primary chain stand up to the abuse? Did you bend the crank as other CBX drag racers did? How many No1 cylinder rods did the motor throw?
@Andywiththespanners11 ай бұрын
Thanks for the comments, we ran a brand new chain for each season, never an issue, we never bent the crank but then we didn't try to lighten it like some others did so maybe that's something. We never had an issue with no1 rods or any of them, (the issue with number 1 rods was something standard bikes would encounter if left on the side stand and the fuel tap left on, because the no1 carb was so much lower that the no6 for example, fuel would flow down flooding the no1 cylinder and then bending the rod when you cranked the motor against the fuel which doesn't compress, later bikes had a vacuum valve to stop this) we broke the stock rods very early on and then went to the same set up as top fuel bikes and never had an issue, we broke a few clutches, broke a couple of gearboxes , I would say the gearbox was probably the limiting factor for us back then, we ran a 3 speed semi system in the end and that was brilliant until it let go when we got greedy with the boost pressure.
@lipsee10011 ай бұрын
I have the same model bike ,same colour,been stood for 10yrs plus...it maybe worth taking a look beneath the points at the auto advance
@Andywiththespanners11 ай бұрын
That's a very good call, looking at the corrosion around the points then it's very likely that the advancer is stuck too. For this video we just wanted to get it to run, whoever buys the bike has the knowledge now that there's nothing major wrong and can go through it properly. We only have a few hours to do this. Thanks and if you haven't already then please click the subscribe, if you have then many thanks.
@lipsee10011 ай бұрын
@@Andywiththespanners The auto advance can be stuck open,which means the engine will not run below about 1400rpm,if you are breaking that bike ,I would be interested in the kick start lever and switch gear,if not then thats ok
@Andywiththespanners11 ай бұрын
@@lipsee100 I was just visiting Topdog motorcycles and they just sell complete project bikes and nice running examples but not spares
@lipsee10011 ай бұрын
@@Andywiththespanners No problem,,its stood for 10yrs I,m in no hurry...
@markmcintosh186211 ай бұрын
Mud wasp nests.
@leegraves10111 ай бұрын
Also know as mud dawbers
@Andywiththespanners11 ай бұрын
Thanks for that, it's not something that I've seen here in the UK 👍
@davebarrowcliffe12898 ай бұрын
@Andywiththespanners Mud - dobbers. We don't get them here.
@davidanderson450011 ай бұрын
the cb 500 was a twin cylinder
@Andywiththespanners11 ай бұрын
Yes, they did make cb500 two cylinder bikes but they did also make a four as per the video, this was later superceded by the cb550
@davidanderson450011 ай бұрын
got them all had most of them
@Andywiththespanners11 ай бұрын
Check out the other quizzes on my channel 👍
@stevenw824511 ай бұрын
I was close, but I didn't get the CL Honda...I thought it was a CB, Love the dose of nostalgia, Andy! ( Steve from FL, USA. :-) )
@Andywiththespanners11 ай бұрын
Glad you enjoyed it, don't forget to subscribe, we have more quizzes and classic bike videos on my channel 👍
@mainlander6299 Жыл бұрын
Loved this video, and I remember seeing at least one image of this bike in the press at the time. Other turbo bikes like the monster featured in PB magazine got my brain working. It took a while but my turbo gsxr1100 has done everything from beach racing to track days. You guys started it all. Cheers 🍻