Hey man- I think I commented the first time I watched and used this video installing a ZumoXT on my t7, but swapping out my GPS and pulled this back up for some reminder tips on the connections. Great pace, visibility of components and explanation of steps. Thanks again!
@benyaeast4741Ай бұрын
great video man super smooth tutorial 🙏🏽 im installing this to my zx10 but wanted to ask, would the black cable go to ground connection ? In your video you put it on the negative side of the battery, and putting on the red cable directly on the positive side of the battery, would that drain the battery ? cheers 🙏🏽🙏🏽🙏🏽
@TheWanderingGeezer2 ай бұрын
Very well done. No BS, good step by step explanation. Thanks
@MotoSouth2 ай бұрын
Thanks for watching 👍
@redallaround2 ай бұрын
Just wanted to thank you for the awesome video. Sorry to hear about the hurricane damage, I hope that you've since recovered and are back out on the road. I ended up rolling the excess GPS wire into the empty auxiliary cavity on the right side of the cowl; there is an outlet that allows the cable to spit out right where the empty auxiliary connector is sitting. Again, great video, thank you for passing on the knowledge!
@MotoSouth2 ай бұрын
Thanks for watching. As for the hurricane damage, everything is pretty much back to normal but of course they are predicting this year to be one of the worst seasons ever. Guess we’ll see 🤞
@redallaround2 ай бұрын
@MotoSouth well fingers crossed its a smooth season and you keep the rubber side down.
@edwardgillatt16662 ай бұрын
Great video and saved me £50 per hour on labour at Motorcycle Shop. Enjoyed working on the bike as that is part of ownership
@MotoSouth2 ай бұрын
Awesome! I have almost as much fun modifying and working on my bikes as I do riding them 👍
@Marc-fn4ib3 ай бұрын
Hello, I much appreciate your videos 👍 question what seat is they what you installed. Best greeting from the Netherlands
@MotoSouth3 ай бұрын
I have the Seat Concepts comfort tall.
@johnvoit96293 ай бұрын
Grear video!
@floreset4093 ай бұрын
Tank you for showing all the details!😊
@here2enjoy-bt8jq3 ай бұрын
Does 2023 and later vehicles need this airbox mod? Even xsr900?
@pmanning4313 ай бұрын
K&N filter easier to install and take off.
@Spacchio3 ай бұрын
Do they last? Isn’t rain and mud ruining them?
@MotoSouth3 ай бұрын
They held up fine for the 4 years I had them
@traskabraska3 ай бұрын
excellent, excellent tutorial! thanks!!
@ohenrycooper4 ай бұрын
what is the electrical connector I need for this?
@MotoSouth3 ай бұрын
Link in the description 👍
@Qrisco4 ай бұрын
Where can I buy the headlight? The link says not available
@francisantony124 ай бұрын
That was a fantastic video. Very useful - watched this 3 times - helped me a lot. ( I could also see the care you have taken with the high quality video and audio ) Thank you very much 🙏 🙏 🙏
@MotoSouth4 ай бұрын
Thanks for watching 😁
@MoF9594 ай бұрын
Hey, love the explanation! Is there any reason why I couldn't cut off the yamaha plug and just tie both cables to each other?
@MotoSouth4 ай бұрын
Definitely an option. I just prefer to keep the factory harness intact and plug into it.
@Mieszkanierzeszow4 ай бұрын
very helpfull thanks
@user-go6kv9qn5u4 ай бұрын
The connectors you crimped come from the blank connector? 10min :19sec
@MotoSouth4 ай бұрын
Got them from Amazon
@KotaRidez4 ай бұрын
Did you have to use a drill press to drill the holes or can you use a regular drill?
@MotoSouth4 ай бұрын
If you’re careful and center punch the holes, a drill should work fine
@51iohC5 ай бұрын
code doesnt work anymore
@MotoSouth5 ай бұрын
It’s been a while
@Maciekat5 ай бұрын
Amount of paste 😮
@scottfast035 ай бұрын
This was exactly what I needed!! Thanks for sharing!
@kostasrestas5 ай бұрын
Can you do all this without remove the plastics???
@scottfast035 ай бұрын
Great video. Thanks for sharing this.
@mrmidnight325 ай бұрын
Will this work on the FZ09 in a legend car?
@MotoSouth5 ай бұрын
Should work the same
@thorpsy1005 ай бұрын
Has anyone recently bought from Motoinkz? I bought some years ago and they were good but some I bought a few months ago are terrible. Seems quality dipped a lot.
@andreaa.23956 ай бұрын
Oggi ho montato le barre, il tuo video è stato di grande aiuto. Come da te indicato ho utilizzato il cric dell'auto sotto la pistra paramotore per mantenere la base allineata.. 🎉grande
@TarmacEJ2576 ай бұрын
People should know that Leovince welds in the baffle, and you have to dremel out the screw... which is close to impossible without destroying the exhaust.
@MotoSouth5 ай бұрын
Wasn’t the case with mine
@matthew56606 ай бұрын
Do they mount with the engine ? Or the frame please?
@reyhatch34066 ай бұрын
I'm wondering why the oil that came out from the drain plug hole was black and looked like it needed to be changed, but the oil from the filter clean? - That doesn't make sense to me.
@ardae54026 ай бұрын
Hello. Is the barkbusters better for wind protection than the stock ones?
@garyrourke32846 ай бұрын
That is my question also….I find the stock ones don’t protect very well from the cold ….hope we get an answer
@MotoSouth6 ай бұрын
Not much difference as far as I can tell. You could go with one of the larger variations like the Storm for better wind protection. It would basically just replace the plastic shield part.
@andreaa.23956 ай бұрын
Ciao ottimo video. Quindi possibile stringere i dadi anche senza chiave dinamometrica? Grazie
@kostasrestas6 ай бұрын
what about Newtons at bolts??
@S.Michaelis6 ай бұрын
Well done and extremely helpful video. As others have stated, thanks for taking the time making it.👍
@kostasrestas7 ай бұрын
nice job man!! did your knees make any attache with the bars when you are riding?? also , when you have the steering wheel at full right or left position does hit the adaptor of bars under the headlight???
@MotoSouth7 ай бұрын
No contact from either. They work great 👍
@luisortiz15737 ай бұрын
If you want to sell the factory parts let me know
@TALENTCRAZY8 ай бұрын
Im about to buy them, but I dont know if the basic or bunker version, Do you miss the extra engine protection?
@MotoSouth8 ай бұрын
I’ve dropped the bike once since I’ve installed them and engine was fine. If you ride near a lot of large rocks then maybe it would be better to have the extra protection. Honestly, for me, now that companies are starting to offer more durable body panels, I’ve been thinking about ditching them completely to save a little weight
@andrewsmith9769 ай бұрын
I got the Heed full set of bars for mine, exactly the same procedure only you also need to take out two extra bolts on low point of frame, on left side at low bolts worth cutting cable tie and applying new one once bars fitted. Great quality bars and really easy to fit.
@Josephdotcom9 ай бұрын
This tool works down and up shifts?
@MotoSouth9 ай бұрын
Only up shifts
@Josephdotcom8 ай бұрын
@@MotoSouththanks
@Charlie-fc1mh9 ай бұрын
Just watched this. That is unreal. Tuned for the stock settings. I'm thinking about getting the 2024 tracer 9 gt plus or either the mt10. I think I would rather go this route rather than buying a full exhaust and then having a remap done. We'll see.
@doctorv61979 ай бұрын
I've got it....
@michaelcox154810 ай бұрын
Great video - i just followed this to instal my heed basic bars and it would have taken waaaaay longer with just the included instructions.
@MotoSouth10 ай бұрын
Thanks for watching 👍
@turboboy010 ай бұрын
just bought one for my zx14r. went with the top mount kit. cant wait for it to get here. ill be doing more longer distance riding.
@nemerkha10 ай бұрын
Just ordered the same for my WR. How bad is it when touring WITH baffle in? Say anything over 65-70mph?
@MotoSouth10 ай бұрын
I normally ride with earplugs and honestly the wind noise is more bothersome than the sound of the exhaust which isn’t bad at all
@nemerkha9 ай бұрын
@@MotoSouthgot it delivered and fitted. It’s fine with baffle, like it much more than stock. Rode it for an hour in town without a baffle though, that was just too loud for my liking. Had to ride with my mouth open!
@MotoSouth9 ай бұрын
@nemerkha I prefer it with the baffle. Just right
@wetlifesports10 ай бұрын
Nice Job!
@minion23610 ай бұрын
one click is enough when using your torque wrench
@MotoSouth10 ай бұрын
I like the verification of an extra click. Thanks 👍
@yourwifesboyfriend608110 ай бұрын
I just finished up today, had my bars cut and tapped waiting around for 1fngr to come out with their v4 clutch perch/lever. I tapped them by hand with no vice, just drilled the tap until it bit, then worked it with a wrench and a pipe while sitting on the bars. It was a royal pain in the ass but came out way better than I expected. The other pain in the ass was bending that clutch cable housing. Had to break out my trusty pipe again to work that housing straighter, but the wrench and bar threads broke through the electrical tape and marked up the housing. Not the end of the world, though. I appreciate you putting this video together, it really helped. Glad to have the bars on too, they should’ve come like that stock.
@thewatcher64110 ай бұрын
Hey nice video mate, just a quick question what could these bars help with? i mean what's the difference between ProTaper bars and stock ones
@MotoSouth10 ай бұрын
Number one reason I went with them was for the look of the black bars. They do make turn in and steering better though. Also a slightly more comfortable riding position
@batlong26109210 ай бұрын
Does mt09 2018 needs Exhaust Gaskets? On amazon website just said that it compatible for 2014-2016