2 жыл бұрын
2 жыл бұрын
Пікірлер
@Ahleen0 Күн бұрын
Do you know how to fix the wedge of the running board I have Yukon 2014
@leonelplascencia2990 9 күн бұрын
Original engine on the FJ60?
@AdventureTEQ 5 күн бұрын
The blue 62, yes. Don’t know about the others.
@rickyrogers5729 9 күн бұрын
I think you might have the wrong length springs. That shackle angle doesn't look right
@AdventureTEQ 5 күн бұрын
What do you mean? If anything the shackle angles would be more close to a 45° angle 📐 if it were perfect. Meaning the springs would be longer. But, being heavy duty suspension, when loaded up super heavy, the shackle achieves closer to that angle. Please tell me you’re not building suspensions with vertical shackles. Because that’s the way you guarantee the roughest ride possible! Basic suspension geometry.
@rickyrogers5729 3 күн бұрын
@@AdventureTEQ I agree it should be closer to 45. Those springs must be designed for some constant load then.
@ersaviation3031 10 күн бұрын
That idea for raising the upper control arm with the jack in the truck is genius!
@oooooooo7806 12 күн бұрын
Arguably the mostly reliable 98hp ever made. 😂 I've had several trucks from an 83 to a 92 and wasn't nice to them and they never let me down. One pieced together, factory turbo version was the most fun. 😁
@AdventureTEQ 11 күн бұрын
Hellz yah! Would be rad to find a turbo’d one! 😎
@oooooooo7806 11 күн бұрын
@AdventureTEQ A friend of mine and I used to haul some scrap and got an engine from one truck and a turbo and computer from another. It was fun for a couple months until it developed a major knock and I had to swap back to the regular 22RE. A rusted out 4wd 85 Xtracab going over 90mph was a little sketchy anyway. 😂
@mitjaosterman3534 13 күн бұрын
Hi It s 4,2 or 2,8 ?
@AdventureTEQ 11 күн бұрын
I’m not familiar with those terms. ?
@shanevonharten3100 14 күн бұрын
Nice old troopy. Are they bright rear lights or was he on the brakes the whole vid
@AdventureTEQ 13 күн бұрын
1/2 of that trail is downhill.
@amritsingh6949 14 күн бұрын
Good job my friend I look your video next week I rebuild my 1994 oh, this is a great video. I have some idea from you.🙏
@koehnboy 15 күн бұрын
Bucket list
@justme197511 15 күн бұрын
Chained up darkness lol😅
@justme197511 15 күн бұрын
🤩 looking good, 70Toopy & 100do making the Utah outback drive about 🤙🏼
@charliecarter1878 16 күн бұрын
One of the best engines in the mid 80's to early or mid 90's..... FKKIN AWESOME ENGINE. Toyota all the FKKN WAY. Great video!
@AdventureTEQ 15 күн бұрын
@@charliecarter1878 I wouldn’t pass up on one! Might have to collect some more Yota’s with these motors! 🙌🏻
@charliecarter1878 15 күн бұрын
@@AdventureTEQ Yup…so it appears to me that you know what’s up, no doubt about it! :)
@Highvoltagetraffic 18 күн бұрын
Mine make the same clunk sound when upward motion stops. I’ve seen where the step motor operation is quiet on other trucks.
@AdventureTEQ 16 күн бұрын
Sometimes mine clunks. Usually that sound isn’t present.
@yung4evertelevision314 21 күн бұрын
Paid over 800 to get mine fixed and they still have my car been holding it for weeks
@AdventureTEQ 16 күн бұрын
That’s terrible! Hopefully you can be confident it was done right in the end. 🤨
@Ahleen0 22 күн бұрын
هل تعلم اين اجد التروس الداخليه لمحرك دعسه يوكن دينالي ٢٠١٤
@AdventureTEQ 16 күн бұрын
Sorry but I can’t help ya! 🤷🏼♂️
@kpy3p 22 күн бұрын
Quick question, at the end when you were talking about how your wheel was turned one direction too much. Why did you turn the steering wheel? Shouldn't the steering wheel have been locked at dead center? Also, when I get the new steering rack, do I have to make sure it is dead center or does it come locked at dead center ready to go back in assuming the steering wheel is at center?
@AdventureTEQ 16 күн бұрын
Hi! Sorry for the delayed response. Great questions! First: I can’t recall why I turned the steering wheel, but it probably had to do with me trying to confirm to myself that it went so far one way or the other… or perhaps I just rotated it while I was inside for some reason, wasn’t sure which way it needed to go back to be originally centered, then just went the wrong way in my attempt to center it. I don’t recall! Wait! I think it’s because I needed to rotate it in order to get the one side more extended than the other, in order to facilitate ease of rack removal, and then probably forgot to get it back centered… But just be sure to keep track of where you move yours and return it to locked and centered! Second: I didn’t trust the manufacturer to have it centered when delivered. So I rotated fully in both directions before installing, while taking measurements as to each end’s travel, and then centered that accordingly just before install. Good luck! 🍀
@highhook6543 Ай бұрын
Thanks man! One of my motors took a crap after a month! Got the warranty motor back, no instructions, nothing, but the motor and hardware. Anyway, thanks dude, I took it apart easy enough, but the KEY, was cycling the motor to match the screw holes,,, that sucked, and it would have taken me for forever to figure out, still took about 15 minutes. I was installing it with the step down and the door OPEN, with the motor cycled down,, Magic I can't thank you enough!!!! 🤙🤙🤙
@AdventureTEQ Ай бұрын
Heck yah! Great to hear it. 🙌🏻
@tomduvoisin9987 Ай бұрын
Excellent video..the drivers side on our 2019 Jeep did pretty much the same thing. Except the step is stuck in the up position..
@AdventureTEQ Ай бұрын
Thanks a lot! Mine are an ongoing saga of maintenance, screeching, and general PITA. Not stoked about them.
@adriansanchez5962 Ай бұрын
Very good video, thanks for sharing. Covered lots of detailed information.
@alejoactivoortega394 Ай бұрын
Gracias por tu video. Ahora puedo hacerlo yo mismo desde mi casa
@eagleeyeswings2863 Ай бұрын
radiator have top plastic cover and under ? or this is yellow brass ?
@AdventureTEQ Ай бұрын
Yes, the OEM Toyota radiator is made of aluminum and a reinforced plastic material. No brass.
@cristobalvillalpando7451 Ай бұрын
Great video, very helpful thank you sir
@AdventureTEQ Ай бұрын
🙌🏻
@crypto2922 Ай бұрын
Where can I get this exact lift kit?
@AdventureTEQ Ай бұрын
Cruiser Outfitters in Salt Lake City (Sandy) Utah. Tell them Adventure Teq sent ya!
@farestabs 2 ай бұрын
How did you get the tire jack to stand so stable and not slip off and cause the top plate to upper control arm to smash down 😅
@AdventureTEQ 2 ай бұрын
Magic
@preacher031163 2 ай бұрын
When u ramble i move on
@AdventureTEQ 2 ай бұрын
💔
@user-px5pl1gw9z 2 ай бұрын
The spur gear that sticks out the motor assembly is what broke on mine because one day i opened my door and there was pieces of gear on the floor. I’m not sure if I have to replace the whole motor assembly.
@AdventureTEQ 2 ай бұрын
Let us know if you get a replacement gear or mechanism. Or have to replace the whole thing.
@lastofthefinest 2 ай бұрын
Mine is stuck inboard. How do I get it out?
@AdventureTEQ 2 ай бұрын
I’d call their tech service line and ask them. I’m not sure!
@glenncrane1651 2 ай бұрын
I have 60.000mile 60series Australia still has original plastic from dealer on seats even sparewheel sticker bottom of tailgate
@jasonmoore5685 2 ай бұрын
If I can blow it up can I bring you back lol@-)---
@jasonmoore5685 2 ай бұрын
It's a easy fix just the engine
@jasonmoore5685 2 ай бұрын
Sold🎉
@jasonmoore5685 2 ай бұрын
Did you grease your fingers😅
@theredorealtor8039 2 ай бұрын
Thank you for the video, you did a good job. I’m going to tackle it when I have time, for now I’ve pulled the fuse and at least feel better that I can actually fix it myself or order the motor and replace that myself as well. Good job posting the videos, I need to do it too so I can “quit” my job but I absolutely hate filming and abhor doing anything on the computer like edit videos a well, but I’ve told myself I must do it so I can go move to Mexico 🤣
@AdventureTEQ 2 ай бұрын
😆🤣
@richierich4604 2 ай бұрын
at least I'll know what to do when the warranty runs out
@richierich4604 2 ай бұрын
I had those installed on my 2011 Tahoe and they have a five yr warranty on them so when they act up I just let them handle it until the warranty runs out
@RinoTaliman 2 ай бұрын
Did you have to bore the engine block for the 0.50 pistons?
@AdventureTEQ 2 ай бұрын
Yeah.
@rachaelb9164 2 ай бұрын
I swear Utah looks like it’s on another planet. The landscape is crazy.
@tjpatterson1800 2 ай бұрын
It appears as though you failed to re-tighten the clamp closest to the throttle body after wrestling it back into place the last time. ;) When working on critical engine components, be sure to slow down and double check your work folks!
@AdventureTEQ 2 ай бұрын
Uhm, not in this case my friend. I have dealt with this clamp system loosening and causing problems countless times. No matter how tight I get them. Now one thing I haven’t tried is a jam nut to lock the clamps in place. Maybe I’ll try that next! Thanks for checking out the video though. 🙌🏻
@haroldharold3908 2 ай бұрын
Got one ..its great I use a 200w sola panel ..folding type not expensive brand with a 120 amp 5 year old gel battery and I runs great..sunset 12.9 or more morning can be down to 12.2 but in half a hour after sunrise battery is back to about 12.4 and goes to 12.9 or more in about 2 hours even on overcast days with patches of sun and shade ..not sure of total cloud cover all day for a few day cos it hasn't happened to me yet ..I use it for several months each year in heat range 25 to 40 + and no trouble if I'm shifting camp I fill it with water bottles if half empty cos mass hold cold better than air and cool it to the temperatures I us and it stays frozen for at least 8 hours maybe more but 8 is about as long as I travel...I set the freezer at - 18 and fridge at 6+ ...great machine love it so far...was using gas fridge and dident want to take a chance on electric but great sola blanket is light and no gas bottles to carry..good luck
@AdventureTEQ 2 ай бұрын
Excellent! I recently upgraded the plastic hinges to some red ones that make the lid easy on/off. Check for those!
@Mikemeshell63 3 ай бұрын
Worked for me
@Tritonsnapper 3 ай бұрын
what size tryes are you running and what offset rims
@AdventureTEQ 3 ай бұрын
32 10.50 R15. I don’t know the backspace.
@Tritonsnapper 3 ай бұрын
@@AdventureTEQ ah ok they look like 33s in the video
@ronparker6489 3 ай бұрын
Abosolute professional quality video. Love your neat, clean shop area. No chance of that happening by me. Dang! But the job will get done with your helpful contribution. Thanks so much guy.
@AdventureTEQ 3 ай бұрын
Awesome! Thanks a lot! We’re getting ever closer to having this truck running! Stay tuned!
@luisjunior92 3 ай бұрын
Dude your the best
@Joker-uj9yt 3 ай бұрын
Welcome back after 10 months absence
@AdventureTEQ 3 ай бұрын
I wouldn’t go so far as to say I’m “back”… but thanks! 😆🙌🏻
@BigFishOverlanding 3 ай бұрын
I had a V6 4runner that was rebuilt and the mechanic forgot the C clips on the wrist pins...the block was toast after a few miles.
@AdventureTEQ 3 ай бұрын
😫
@neilmiller6774 3 ай бұрын
Thank you so much !
@jerrytalley802 3 ай бұрын
I’m learning that my beloved 2016 tundra has a crappy cargo capacity, which I also learned recently includes driver, passengers any luggage, etc. I have a fiberglass cap as well, and a bedslide. My camper is 3,000 ponds under my tow weight capacity but just unstable when pulling the camper. I installed airlift 5,000 but so far, doesn’t seem to fix my dilemma. I’m going to try different air pressure to see if I can dial it in.
@AdventureTEQ 3 ай бұрын
How high is your airbag pressure? My 7,000 lbs camper trailer (loaded) tows nice and true. I do have a load distribution hitch for that trailer. Helps a lot. I also haul a 14,000 lbs capacity trailer and have loaded my 8,500 lbs Land Cruiser onto it. Combined weight of 4500 lbs trailer & Cruiser is about 13000 lbs (severely over gross of the GCVWR) but she hauls straight and true no probs.
@InsideTraderNancy 2 ай бұрын
Is there any update on if higher psi was enough to fix ur dilemma? I have a 2016 tundra. I'm noticing the same when I haul my camper. But I haven't done the bags yet.
@jrzyboy99 3 ай бұрын
Great video…one question do you notice that it hits the internal bump stop when the rear is empty? I’ve heard people say it hits the bump stop way too easy.
@AdventureTEQ 3 ай бұрын
Thanks! I may have felt it hit the bumper once after I first installed them. But i generally keep the pressure upwards of 55 psi at all times. And I have no recollection of hitting stops regularly.
@jrzyboy99 3 ай бұрын
@@AdventureTEQthank you
@MrSours69 3 ай бұрын
Holy shit LoL. What kind of air impact gun is that??? 😅
@SumanMondal-er9fw 3 ай бұрын
Good tools ❤❤❤