Zzzzzzzzzzzzzzzzzzzzzzzz!

Hi! I Considering doing the same. Do you keep it outside? You point it out of the window? How do you operate with this antenna? My idea is to mount this antenna on a tripod, and make it in some way that is possible to bend it out of the window , and when I finish operating, just move it inside the room.

I have one on the way. Really excited about it. Thanks for the band tutorial. 73

That is one of the reasons I'd never chose to live in a HOA controlled area, due to the abuse and large fraud scams. I'm a big time Ham and GMRS operator owning many repeaters and some commercial DMR capacity plus services. HOA really ruin the nice suburban areas and too many Karens out there to report you on B.S. Nearby my home area there were two HOA Managers indited in Federal charges and sent to Federal Prison due to Fraud against the members, also trying to run many members out due to their color of their home and the trees not being cut like they want it to be, many little things like that. It was nice to see the HOA being sued and ran out of exitance.

But did the arrangement make any reasonable contacts if not suggest you try the wire antenna cheaper and 100% success.

hang a 1/4 wave long 0,5mm copperwire outside on a tree, that will work ALOT better than a small antenna in the room. 📶 a wire that thin will be barely visible and not noticed as an antenna by the hoa, or maybe a 0,3mm copperwire can be used, that is even less visible. by the way, i find that not right how much the hoa comes against radioamateurs, there should be a class lawsuit to once for all stop the hoa from messing with radioamateurs.

Nice video and neat setup for your situation. Have you thought about a wire antenna with your tuner? You could hang a wire around the perimeter of your room with the Command Strips. Also you could hang your hamstick antenna that you showed horizontal from your Command Strips. 73 de K9KXW

Can you describe WHERE to get these components- Like the bracket? Details?

All this could have been explained in 2 min. What a waist of time.

getting this for 10 meters on the maker has a swivel center mount so i can go vert or horiz

The antenna pointing down is actually doing nothing for you.....

Thanks for showing it close up. There is not a very good picture available. Now I understand how they work.

My solution: cdn-bio.qrz.com/x/w4acx/antenna2.jpg?p=da43e55192f3c6f05bcc51fe4e202e75

The G5RV Jr. will also work well on 6 meters. It is 5/2-waves long. I got my VUCC on 6 with one erected as a sloper between 2009 and 2014... De WB2VUO here near Buffalo, NY

As far as for Propel hosting, Despite possessing all the requisite upgrades, my server has been persistently experiencing downtime since its inception. Regrettably, my numerous attempts to elicit assistance from the support team have thus far proved futile, as I have not received any replies. The conspicuous lack of support has resulted in all of my websites being inaccessible, and I am frequently unable to even log in.

i’m glad it’s working for you but my question is why did you buy a home with restrictions in the first place? i have seen people i’m bad places like that and what they do is stick a mag mount on their vehicle when they are home and run a piece of coax into the house. the vehicle provided a good ground and it gets the antenna outside at least. they can not stop you from having an antenna on your vehicle

honestly not much of a review of the G5RV SORRY!

fake fake fake nothing else, have you purchased this app, else dont post dummy review and videos, this is real fake app, looting money by pulling peoples like you, propel host is making fool of us.

this is not working, without you trying and found useful, dont share and misguide others

Well done young man. I see the spirit of ham radio is with you LOL Make yourself an ugly balun for it and get on FT-8 and work the world. All the very best 2M0LNF

The ZS6BKW is a much better Aerial check it out .

Any information on the stand and antenna mount? Looks like this would fit my situation too, HOA rules don't allow antennas! 73

What connector and nylon washers are you using between the antenna and mount?

I was about to throw away my music stand. Great idea

very good and informative video - thanks

Good video

excellent idea kg6mn

That’s a corner or 90 degree clamp for like making frames and cabinets. That is a great idea and an ingenious use.

Thanks for your antenna videos. I've got limited space and I'm planning on giving the SPX-100 antenna a try indoors. (It's somewhat similar to your HVT-400). I've also got a magnetic loop antenna on order, again for indoor use. However something else that you might like to try yourself is a half-wave dipole, nominally for 20 metres. My own version has the two elements stretching along the front wall of my bedroom, back along the side walls and then, to fit in the required length, vertically downwards at the ends. (I started out by adding a bit of extra length to the elements and then trimmed them back to get somewhere close to resonance). They're fed via a 1:1 balun, with a line isolator at the transceiver end of the coax. (I've just used gaffer tape to fix the antenna wire to my walls but Command hooks would provide a neater solution). I'm only running 20 watts, from a Xiegu G90, but I've worked stations in the Middle East (such as Oman, over 3500 miles away from me, on 20 metres) and Brazil (5000 miles from me, on 17 metres) from my QTH here in the UK. I can even get out quite well on 40 metres with it too. I hope to meet you on air one day. 73s, Chris, M0JZD.

Very awesome video,yesterday I order the wonderful one from replicaclubs..ru

I loved your video. I have been trying to search for vid similar to yours that teaches the ideas in this video! 🩺 🩺Your tip really is like the content from Doctor Ethan. Dr's explanations are insightful and I actually learned a lot for my practice. He is an educational health enthusiast in Europe and he teaches diseases and diseases! I recommend you watch his YT out and give the Dr a subscribe! 👉 #DrEthanHealth

not made for solid state amps !

I bought this and no support and facebook group they don't reply.