@JBbudgettravel Nope! Sadly, I am at least 3 times that age. But the videos were made to help a certain 12 year old to learn how to solve.
@JBbudgettravel29 күн бұрын
@@darensworld2221 there's a earlier video of him doing the traditional Rubik cube in 40 seconds feel free to browse my videos
@NoahplayzGamez213 ай бұрын
Hey
@_redmas6 ай бұрын
I am a new Star Citizen player since 2 weeks, and the commodities interface is chinese to me and that effect is not passing over time ^^
@darensworld22216 ай бұрын
Welcome to the verse! It's certainly not an easy game to learn. It took me quite a long time to figure things out, but I think it was worth it. I am really enjoying playing star citizen. If you need any help with anything, feel free to ask.
@Gamezoneadi Жыл бұрын
is it possible with wireless controller? if we attach the dongle to the rc car somehow is it possible to make it read controller input ?
@darensworld2221 Жыл бұрын
That is a great question! It would be awesome to control RC car with a gaming controller! There must be some way to make that work out, but I don't know how to accomplish that.
@Gamezoneadi Жыл бұрын
can we do this with controller?
@224Shrek Жыл бұрын
im going their today being that this is my first time being their for rc because i have also been their for other events and archery practice with my mom
@darensworld2221 Жыл бұрын
Ok. Cool. Did you enjoy your time at the RC course? What do you have for RC?
@224Shrek Жыл бұрын
@@darensworld2221 Yes I did have a lot of fun and I own a Traxxas Rustler and I also brought my Traxxas Trx4m mini crawler for when the rustler died
@zacharyhackenberry2554 Жыл бұрын
Yes I know you
@zacharyhackenberry2554 Жыл бұрын
Yes I know you
@Occasuss Жыл бұрын
Nice Mohawk.
@aul2411 Жыл бұрын
i think i know who this is
@aul2411 Жыл бұрын
i think i know who this is
@aul2411 Жыл бұрын
i think i know who this is
@user-qf7eq6ed8q2 жыл бұрын
Cool✨
@CruiserMac2 жыл бұрын
Nicely done !
@darensworld22212 жыл бұрын
Thank you!
@damonhinton36652 жыл бұрын
Great job i have the steering wheel from a old X-box now i need to figure out the transmitter setup, keep up the great work.
@darensworld22212 жыл бұрын
Getting the transmitter set up to the wheel was fairly easy, but you will have to let me know if you figure out the pedals set up. Good luck! 👍
@stevenbellamy12 жыл бұрын
My advice is don't do alot of what the smelters are doing. That is not including yourself in the video. Take a wider shot including you so it's different
@gpgp17502 жыл бұрын
Is that ur notch filter connected to ur video receiver or transmitter?
@darensworld22212 жыл бұрын
Connected to the video receiver. Did I put that in the right place? I was not completely sure if that is where it goes.
@gpgp17502 жыл бұрын
@@darensworld2221 haha that’s why I’m asking, I’ve seen videos when they put it on the transmitter
@gpgp17502 жыл бұрын
Just about the exact same setup I’m using
@GeneralScott12 жыл бұрын
Dang hit a lady lol. almost killed her dog too lol. yeah i would lay low for a minute. maybe use a different color body when u do go out next too. maybe change the shock config, ur getting alot of vibration that could be solved by softer springs or changing shock oil. its handling those bumps like a short track truck lol, which it is, but u launched in the air a couple times lol(wouldnt want to lose it a mile away) . i would also put the cam on top of the body for better fov. you can put a gopro or something in the cockpit to get that pov. all in all sweet setup, cant wait for more vids...upon further inspection(looking at another vid lol) it look like ur just gunning it and wheelieing constantly lol. slow down on those curbs baby, ur lucky u got ur car back, lol
@darensworld22212 жыл бұрын
A lot of good advice there. Thanks. I appreciate your input. Originally I planned on mounting the camera on top, but the mount I was trying to create wasn't working out, so I mounted it the easy way. Thinking about changing center diff fluid to 1 mil weight to help tame my heavy throttle finger.
@ACB-R.C24 күн бұрын
😂😂😂
@olds97lss2 жыл бұрын
Do you see all that flickering in the goggles?
@darensworld22212 жыл бұрын
I do see the flickering but not quite as much as the recorded video. I'm hoping my new antennas and my frequency filter will eliminate that or at least mellow it out.
@abitoffblacksmithing99852 жыл бұрын
Hey man pretty cool! Im a blacksmith and recently I have been getting into melting copper ,brass aluminum etc.. I made my 1st ingot yesterday!! Totally stoked!!!
@darensworld22212 жыл бұрын
It is very addicting once you start. Congrats on your first ingot! I'm willing to bet you will make many more.
@abitoffblacksmithing99852 жыл бұрын
@@darensworld2221 yepp! In the works as we speak! Keep on keeping on!!
@Archiemonty2 жыл бұрын
Wouldn't a bucket of water on stand-by make more sense to dunk the pieces in?
@darensworld22212 жыл бұрын
Yes, absolutely it would. But sometimes when I start melting I'm so excited and don't prepare a bucket of water beforehand.
@MrWingedSoldier3 жыл бұрын
you learn something new everyday maths was never my strong suit but I now understand a little more. thank you
@darensworld22212 жыл бұрын
Very true for many people. Math is the only area I have a lot of confidence in. Glad I can spread a little knowledge.
@MrWingedSoldier3 жыл бұрын
I wanna see more of dem dere tiny quails!
@darensworld22212 жыл бұрын
I'll make sure to catch some video of when my new ones start hatching for ya. Should be just a couple of days from now.
@wertiaaudit57463 жыл бұрын
🙃
@wertiaaudit57463 жыл бұрын
❤
@wertiaaudit57463 жыл бұрын
😁👍
@wertiaaudit57463 жыл бұрын
🇺🇲
@cruisinkruty44053 жыл бұрын
I received the 1 pound copper ingot today! Well cast. thank You so much!
@darensworld22213 жыл бұрын
Glad it found its way to you and thank you.
@MrWingedSoldier3 жыл бұрын
Poor bricks :D
@darensworld22213 жыл бұрын
I know. I lost my patience and smashed my bricks to smithereens.
@MrWingedSoldier3 жыл бұрын
they look like small zippo lighters after you poured them
@jamesway50363 жыл бұрын
Congratulations to the winner and congratulations to you for breaking 100 subs. Keep up the great work 👍
@darensworld22213 жыл бұрын
Thank you.
@Thewulf563 жыл бұрын
Congrats to the Winner, congrats again on breaking 100 subs.
@darensworld22213 жыл бұрын
Thank you.
@metalmeltingmark46553 жыл бұрын
Thanks for sharing
@meltingipswich3 жыл бұрын
👍
@meltingipswich3 жыл бұрын
Congratulations mate so happy for lovely ingot and your shelf is looking good as well 👍
@MARVELOUSMETALS3 жыл бұрын
Awesome!!
@cruisinkruty44053 жыл бұрын
O.K.....Mind Blown.....My name came out.....Holy Chit!
@darensworld22213 жыл бұрын
You're the big winner! 🏆 Congratulations!
@cruisinkruty44053 жыл бұрын
@@darensworld2221 I sent my info to your Gmail addy
@mikewolff6453 жыл бұрын
Congrats!
@metalmeltingmark46553 жыл бұрын
👍
@ChatterontheWire3 жыл бұрын
congrats
@darensworld22213 жыл бұрын
Thank you.
@robertwarner91943 жыл бұрын
New to devil Forge 10kg and copper melting...have good pours...but copper sticking to my molds..graphite, and cheap muffin tins..??what am I doing wrong.
@darensworld22213 жыл бұрын
I've never heard of anybody having problems with their pours sticking to graphite molds. But those muffin tins are not great for pouring into. Especially if you're pouring copper into them. The copper will get the muffin pan hot enough that the two metals will mend with each other.
@robertwarner91943 жыл бұрын
@@darensworld2221 thanks.was able to get them out of graphite with tapping kinda hard on ground. Might try parting powder just for the heck of it. Makes sense .. been using tins for aluminum.. no problems...
@Mark-po2rt3 жыл бұрын
I have not tried copper yet. Aluminum and one bronze ingot and a couple of aluminum chess piece pours. Can't hurt to watch others to learn. Gotta love youtube.
@darensworld22213 жыл бұрын
For sure. Good place to learn new ideas, what to do and what not to do.
@cruisinkruty44053 жыл бұрын
Melting and casting requires focus and attention. Its great therapy too!
@darensworld22213 жыл бұрын
Agreed. Thanks for your support!
@cruisinkruty44053 жыл бұрын
great effort
@darensworld22213 жыл бұрын
Thank you!
@joshberg113 жыл бұрын
Awesome man. Congratulations!
@darensworld22213 жыл бұрын
Thank you!
@Thewulf563 жыл бұрын
Congrats on breaking 100, now onward to 1K. 🍻🐺
@darensworld22213 жыл бұрын
Thanks Wulf! That one is a bit bigger of a jump, but I'm sure I'll get there eventually.
@Thewulf563 жыл бұрын
@@darensworld2221 it can happen quick. It took me right at a year to hit 100, then 3 months later I hit 1K. It's possible. When you gonna finish that pyramid?
@darensworld22213 жыл бұрын
I was just putting thought into that. I have some issues with getting enough copper for the project. So I'm planning on restarting the project with aluminum and seeing if I can make it possible with open pours to progress quicker. But eventually I'm hoping to finish the original project.
@JS-ru1yz3 жыл бұрын
Congratulations! Really cool videos! Been really interested in getting started with this.
@darensworld22213 жыл бұрын
Thank you! I think you should definitely try it out if you have the resources. Be safe and best of luck. 👍
@metalmeltingmark46553 жыл бұрын
Thanks for sharing
@814_casting3 жыл бұрын
Nice job! Always love it when I find a new casting channel. Keep it up and we will watch!!!
@darensworld22213 жыл бұрын
Thank you!
@alexandermclaughlin11493 жыл бұрын
I've always enjoyed watching these buddy, keep it up!
@darensworld22213 жыл бұрын
Thanks Alex! Hope life has been treating you and the family well.