You are most welcome. Glad I could help! 🤙🏼

I know right. Back in the day we didn’t have to think about sensors like that. 😆

Although I am not familiar with the 1.5 L I’m pretty sure that you have a timing belt so I don’t think you would have cam phaser issues. So I’m really leaning towards you have the linkage in the turbo rattling.Like wastegate etc. some of my other subscribers may chime in to help with your scenario. I’m sorry I can’t be of more help, but I would definitely look into the wastegate linkage first .

Mine still looks new. No issues.

@@LivinWith3M if mine does it again, I’m thinking of using locktite adhesive!

@kclark9236 that is an option for sure. Keep me informed on how it goes.

You are most welcome. Glad I could help. 🤙🏼

I respect that. I’ve had many 5.0engines over my life. Love them. 👍🏼

You are most welcome. Glad I could help!!!

Thanks bro. 👊🏼

Hey Jerry, Here is another link. Try this one. amzn.to/45AuFdz Thanks man. 👍🏼

@@LivinWith3M thank you, I was trying to find the one's with white ends like yours, with the bracket clamp.

@@LivinWith3M what what wheels do you have on Zeus?

The company that did the IndoRaptor package from GA added the wheels. They are a discontinued style by KMC called chopstix. They’re not a very expensive wheel, but the company took them and had them gloss powder coated all black. Because you could not get that wheel all black at the time.The specs are 20x12-44 👊🏼

I have not seen those in a short while so they may have changed up designs. I will be on the lookout and if I see the white ones with the bracket clamp will be sure to yell.👍🏼

Awesome!!!

Thank you my brother. Can’t wait to see what a beast your would be with a lift. 👊🏼

Man I totally agree. 🤦🏻‍♂️

I appreciate your input. Some do the full leafs like Deavers and they are awesome no doubt. Do it right the first time I always say. 👍🏼

Oh wow. Regardless. I will update that. Thank you so much for that information

I hear that Edwin. Those Vortex are sweet!!! Awesome addition. 👌🏼

Glad I could help bro. 👊🏼

Thank you. Please explain about the flush port. I’m genuinely curious if that’s not what I should use that for. Thanks for any info.

@@LivinWith3M Check your manual under Flushing section - I have a DF90 and it recommends keeping the engine off while using the flush ports. Dr google can probably explain the why .. good luck and thanks again.

Best to use ear muff style at the vents so the impeller is doing its normal job pulling up water, if you're using the water hose in the flush port the impeller may or may not be getting water because you're forcing it directly into the engine through the flush port which is designed to use with the engine off at least thats what I understood when I bought my new suzuki back in 2018

@FlyassAlex thank you for this advice. I sure appreciate it. I will definitely invest in some ear muff style flushers and make sure my other subscribers know this. 🤙🏼👊🏼👍🏼

Dang I hate that. If you have a volt meter test voltage at the plug and make sure it’s getting 12v when the switch is on. That’s the first thing I would do.

You are welcome man. I agree the quality of the older ones were better. You will not void your warranty by putting the tail gate after market plastic part on there. 🤙🏼

I got my wiring from google search. Just make sure you get the proper wire colors identified for your year model. If you need any help, I’m usually on here and can offer assistance. Good luck 👍🏼 I’m sure you won’t have any issues.

Thanks for that info John. Appreciate it brother. I’m sure some of the subscribers here may definitely need to hear that. 🤙🏼

Thank you for watching my channel. 👊🏼

Thank you. You will love it!!!

How I did it was just grab a spring you think looks close to that length. Then use your hands and stretch to put it on. You should not need tools like pliers to fit these on. You want it to fit snug but not super tight. If the spring is too tight then you will notice your boost gauge won’t boost like normal. Then go to a looser fitting spring. 👍🏼

You’re most welcome, glad I could help.

Thanks Ryan, I’m glad I can help for sure. 👍🏼

Will do Brian. Thank you.

Yes it will be a little quieter but not too much.

You are most welcome. 😊

Oh wow. Definitely gotta get that replaced. Haha.

Awesome, glad it helped you. 🤙🏼

Great info bro. Thank you. I will take care of that for sure. 🤙🏼

@@LivinWith3Myessir anytime

Brown mic tuning light wire goes to a blue wire with grey strip behind the drivers side lamp harness. This is the parking and also Brake light wire. This one wire does both the parking light and when you push the brakes it also gets brighter. I just looked back on the video and I am realizing that I did not make that clear. I’m very sorry about that. So if you connect the brown wire to the blue with the gray stripe, that will give you parking lights and brake lights. You have to do all of this at the tail lights and not lower down near the trailer connect plug. if you are tapping in at the tail lights, you will see the blue wire with the gray stripe. Please let me know if this makes sense. Thanks.

Somehow when I hook up the brown wire from the 4 pin to the parking light, I only get daytime running light. No brake light comes on. If I take the brown wire and hook to brake light, I only get brake. No daytime running light.

@nojtuag4509 man that has me stumped. I will try to do some research and let you know.

Yeah I’m on a stand still right now. Yes anything info would truly appreciated.

So I’ve been researching. What year model is yours? On my 2018 my stock lamp assembly I have the dual filament bulb. Meaning my top bulb is a parking lightbulb but it’s also the brake light bulb. So the blue wire with grey stripe connects to the brown mic tuning and works fine for me. Yours may be different and have multiple wires for brake and parking. I honestly don’t know at this point. Let me know your year model and also are your tail lights the Blindspot monitoring BLISS. Mine are.

Couldn’t have done it without my Sons help. ❤️

Thanks brother. I couldn’t believe how sharp the edges turned out. Super bright too 🤙🏼👊🏼

@@LivinWith3M things are killa🔥🔥

Thanks my bro. That means the world coming from the king of led lighting. Haha. 👊🏼 awesome info on the bolts too. I will get to work on rivets. 👍🏼

Thank you. Nope no issues at all. You will love these lights as they get comments all the time from people. 🤙🏼

The Ecoboost definitely comes with its share of issues to address for sure. But once we address the cam phasers with the updated ones, then replace iwe on the front hubs, possibly put two springs on turbo linkage to stop rattling and usually it fixes most rattles. I still love my fords. Just my opinion.

You are most welcome.

Thank you my brother. I sure appreciate you having my back. 🤙🏼👊🏼

Thanks David. I appreciate it. 🤙🏼

Good deal Edwin, Michael Price can definitely make you some switch identification labels for your panel box. He will handle most custom labels and mine were only $12 bucks. Can’t beat it brother. 🤙🏼Thank you.

Haha. Gotcha bro. 👊🏼

Thank you Anthony. You are right, I never did mention it, but mine is an automatic and is a tilt steering wheel. 👍🏼

Thank you. The offset on the wheels are 20x12-44. I then added a 1.5” spacer so that makes them like a -71 or something close to that total. 🤙🏼

@@LivinWith3Mgotcha looks awesome!

@Raptor178 Thanks brother. I appreciate you checking my channel out and if you need my help or advice then please yell. 🤙🏼

I totally agree. Thanks. 🤙🏼

Thanks man. I sure appreciate it. I know your truck will be super sweet with them for sure. 👍🏼

@@LivinWith3M thanks bro! I can see the wheel lights, I’m just not sure the rock lights have the same impact on my leveled truck as it would on a lifted truck.

I honestly think both would look great brother. But maybe start with wheel lights then gauge the progress and decide from there if you think they would be beneficial. They would only complement that awesome truck of yours. 🤙🏼

Awesome. Love them also. I’m hoping the quality is job one slogan they had years ago is not being bid to the lowest priced parts manufacturer. 🤙🏼