Пікірлер
@matthewhall9692 Күн бұрын
Can the Vevor resaw wood though? It seems you would only really be buying a 14 inch bandsaw if you planned on resawing wood. Like how would it do with a piece of 6 inch red oak stock?
@SirTools 21 сағат бұрын
Go slow LOLOL
@jdowell 2 күн бұрын
I'd buy this if they made a smaller 10 gallon version. The smallest they make is 15.
@SirTools Күн бұрын
Wish there was a 5 gal or something, would be great for oil changes.
@ArthurSusan-vb8qw 2 күн бұрын
I was at a friend's place, and he was working on an old Ford dump truck (diesel). The batteries were dead, so he pulled out a lithium-ion jump starter and power pack he got from JF. Without hesitation... I bought one and use it when I head to the lawn. My tractor only gets cranked these days when I'm out mowing! It never fails to fire up that little diesel. I mostly use it for the tractor, but I keep it in my wife's car to ensure she doesn't get stranded. I also got one with an auxiliary compressor. Tired of flat lawnmower tires. It's the bee's knees. I have a 12-foot enclosed trailer where I store my Hustler 52, and that's where the jump starter resides. Along with tools. I call it my Mobile Storage. Heh-heh-heh.
@SirTools 2 күн бұрын
I like that Mobile storage LOLOL...cool idea !
@peterstevens6555 2 күн бұрын
Kia Ora don't need one here at the moment we are coming into winter !!!
@SirTools 2 күн бұрын
Kia Ora, are those little buggers there too ? and winter coming....I hear ya !
@druidpm 2 күн бұрын
I need about 10 of them too! The mosquitoes are ao bad this year they can carry a person away. 🤣🤣🤣 Link, please.
@peterstevens6555 2 күн бұрын
@@SirTools Yeah! ...they are here but with the winter they tend to die off and wait for the summer!!!
@SirTools 2 күн бұрын
We get them for a week or two and suddenly gone again. I've heard all kinds of crazy theory on where they go. Back to the marshes if it's wet etc....so rain and wind and we either have them or they are not around...strange I guess here
@SirTools Күн бұрын
amzn.to/4bSaf1M
@thomlindgren6253 2 күн бұрын
Great video… I have one of the little desk top one that sucks the bugs in… it does get bugs but in my case I figure the rwo or three it seemed to catch was underwhelming. The solar powered bug machine really looks interesting. It would be great if you could do a little short of it set up at night and have it over a white sheet or something just to see the carnage. As a fellow mosquito dislike (hater is such a ‘negative word’) part of the appeal of the old big zappers was watching/hearing the little buggers getting fried. Thanks for sharing and hope you have some bug free days!
@SirTools 2 күн бұрын
We do love that crackle sound of crispy southern fried mosquitoes LOLOL
@billquillin1952 2 күн бұрын
Here in Eastern North Carolina, I'll need 5!!!
@SirTools 2 күн бұрын
I heard that, a buddy is up there right now in NC and he said something about getting dragged into the bushes by the mosquitoes to finish him off ...
@sideshow6067 2 күн бұрын
Nice product 😄
@SirTools 2 күн бұрын
Did better than expected
@billquillin1952 2 күн бұрын
The mosquito catcher... Add yeast, which produces CO2, which attracts the skiedders!
@SirTools 2 күн бұрын
Ya, doesn't work here, we tried several years in a row and not even ONE dead bugger LOLOL
@MrMatador1955 2 күн бұрын
I purchased recently a two trees ttc 450, im getting a error code ¨ hard limit ok¨´ on the screen, i tried to disconnet power several times n still the same error on the screen, is there something i can do?
@SirTools 2 күн бұрын
Yes, my last error code on a CNC, I added a gcode line that reset to factory, and that fixed the issue.
@MrMatador1955 2 күн бұрын
@@SirTools Thank you for replying! How id do that!
@SirTools 2 күн бұрын
I'd check other KZfaq videos to get all the info you need for adding that into the Gcode. It has worked for me.
@rogers8581 2 күн бұрын
Thanks for that lesson.
@DebbyAlick 4 күн бұрын
I think this product is better than Gooloo's; you can compare them.
@UFOHUNTERS2 4 күн бұрын
got mine on clearance right now amazon 44 bucks,, thanks for review
@SirTools 4 күн бұрын
I love mine and use it constantly with no issues. Hope you enjoy !
@StumblingBumblingIdiot 5 күн бұрын
nice set! Wish it went to 1.5 inches and at least 27mm. They always stop just a bit short then you have to buy singles for the rest. Still a very nice set at a great price!
@armastat 5 күн бұрын
The deeper cuts that peter out is due to carbon build up at the bottom. carbon is a great insulator and does not burn (its the result of something being burned 100% so yeah) The laser will cut much deeper if u could remove the carbon as it is generated, which might be why air assist helps cut deeper. A more informative test would be to use a thick piece of wood and run lines, not circles side by side , spaced maybe 1/2 apart and with increasing number of passes. and then use a saw to cut the board across all the lines and then compare all the cuts.
@MariaGonzalez-ei1pv 5 күн бұрын
Great video,, my safe guard is wobbling and don't know what's causing it ...help.....
@peterstevens6555 5 күн бұрын
Kia Ora, Impact Socket Set always come in handy anywhere in the world!!
@SirTools 5 күн бұрын
Kia Ora, your so right there Pete !
@peterstevens6555 5 күн бұрын
@@SirTools We have the day off this coming Monday, regarding the Kings Birthday!!! 0h! ...that doesn't concern me as I'm retired!
@sideshow6067 5 күн бұрын
Love this stuff , 5 stars 😎
@phils4634 8 күн бұрын
Vevor make pretty good workshop tools. Pretty solid quality, and affordable. Their Helicoil insert kit is (or rather was) a really good buy, however I think they have discontinued it.
@SirTools 8 күн бұрын
Discontinued ? Could be they are making some change to the product specs etc. I like the prices and the quality is "good enough for me". I don't need PRO tools, getting too old for that LOLOL...
@peterstevens6555 9 күн бұрын
Kia Ora bro ...
@SirTools 9 күн бұрын
Kia ORA.....there he is ! Hope all is ok down there in Kiwi Land.
@peterstevens6555 9 күн бұрын
@@SirTools Yeah!! ...all is good here the weather is not bad ...not cold nor hot !!!
@SirTools 9 күн бұрын
Good to hear it. Weather here today was VERY humid and 90deg....Typical Texas.
@thomlindgren6253 9 күн бұрын
Love the products reviewed today. 3D printer guys always have the thing you want or need! 😊I usually enter the give-away if I had even a small idea that I might have a use for it. I currently have one battery operated tool so I’m going to pass on this one. It isn’t that I don’t like the tool holder and charging shelf but I have no need. Thanks for sharing, have a safe and fun Memorial Day weekend!
@SirTools 9 күн бұрын
You and me have no need LOLOL
@sideshow6067 9 күн бұрын
STop breaking your tools
@SirTools 9 күн бұрын
@JamieMeredith 10 күн бұрын
Huge miss for this channel OP. The Grippr needs to have a wipe of the bottom of the tool with IPA (and ideally your material with a wet paper towel. 15 seconds of prep avoids every "point" made by OP (including the 3D printer version!). Ooof. Sorry for you hard miss here brother, but I like the energy of your channel! I down voted this video but I subscribed. :)
@stedyone1090 10 күн бұрын
Junk
@dongraff3456 12 күн бұрын
Well, I also have this sander and need to replace my capacitor... but I am unsure of whether it is a "start" or "run" capacitor... from what I can find, it seems to be a run capacitor... how did you determine it was a start capacitor?
@SirTools 11 күн бұрын
Inside the motor there is a tiny centrifugal switch that is for the "start" windings only. If the motor just hums and bumps back and forth, but using a quick spin on the motor gets it up and running, that is the "start" cap which is used to get the motor running and then the "run windings" take it from there. In some cases you can hear the click seconds after the motor is started and coming up to speed.
@dongraff3456 11 күн бұрын
@@SirToolsInteresting... mine did seem to have that behavior (hand spinning it seemed to get it going... unsure if I heard a click or not), after several uses in this state over a year or so, it wouldn't really maintain any power so I stopped using it. Your video gave me the courage to dig into it! After I took everything apart (disk and drive belt disconnected), it would start up fine and slowly (over 4-8 seconds) loose power until it stopped (this is without anything connected to the motor, just the fan). During my last test, it started up spinning great and about 5 seconds in it suddenly lost power (as indicated by spin speed... maybe 50%), then the capacitor 'squeaked' and started smoking. The capacitor has SH CAP on it and 25uF +10%/ -5%, 250V.AC. I can't easily get into the motor to look and see the centrifugal switch. I'm pretty sure we have the same model (137.215360). I'm surprised it didn't have 'start cap' on it to indicated it was a start capacitor.
@SirTools 11 күн бұрын
Does sounds a bit "fishy", once it reaches full speed it should not slowly drop out. Could be bearings or other issues. Maybe even damaged windings. For the tiny price of a capacitor I'd try swapping out that, it's an easy job and just might fix it. If the windings have gone bad, well...that would be another topic.
@dongraff3456 11 күн бұрын
@@SirToolsThanks! That is my plan...
@SirTools 11 күн бұрын
Good luck, I think you'll be ok.
@keithrayeski6417 12 күн бұрын
Geez, I wish they’d shipped that over with the plasma cutter…I’d have matching set! I like the way the bestarc opens also! A much better system than the vevor. But, I have the brand new vevor and the bestarc plasma…so I’m happy. I AM disappointed in vevors folding welding table though. Still waiting for them to get back to me. They sent me wrong parts and I’ve not been able to finish the welding project I’m on. I like this machine!!
@SirTools 12 күн бұрын
The BestArc seems to be pretty darn good, I didn't review the welding table from Vevor because I have the HoboFreight one and can tell you, the HB is junk and I had several accidents with that table before doing some test welds LOLOL. The side loading does allow for bigger spools, but the top loading for me is better.
@user-ww2lc1yo9c 12 күн бұрын
Looks like the green stuff needs to be replaced after sometime
@Voremaster420 12 күн бұрын
Is this a paid advertisement? Your video is on the amazon page for the vevor router
@SirTools 12 күн бұрын
On Amazon ??....No paycheck here ...geeez
@SaintDavos 13 күн бұрын
Thank you! I am in the search of a workbench for my limited space "shop" at home (laundry/storage room) and this seemed like a good idea on Amazon, but I needed a better look at it and ypur video was very useful, I might try to convince my wife of the need for this purchase.
@SirTools 13 күн бұрын
Work shop space is tight and with wheels it really can make a difference. Glad to hear from you !
@ONEYEDPiRAT 13 күн бұрын
Thank you sir I was hoping to find somebody with intelligence to show me how this thing works I got a weld The idler arm bracket and bought yhis welder for 60 dollars! Using E7018 1/8”
@SirTools 13 күн бұрын
Good DEAL...wow..
@316tech4 13 күн бұрын
It's manifold absolute pressure, not mass air pressure.
@KarlRMooreJr 16 күн бұрын
So did you buy the indie or studio. I am still on the fence.
@SirTools 16 күн бұрын
Hi Karl, me 2. Some time in the future I'd like to do a full show CAD drawing to 3d print etc and look at all the aspects of Plasticity.
@KarlRMooreJr 16 күн бұрын
@@SirTools hey sound good would love to do a show with you on that. I been looking around but I have not seen anyone do that.
@SirTools 16 күн бұрын
There you go ! Might end up with more questions than answers LOLOL...But, we could look at the quality of the printed part, the STL file, the gcode etc and just ..oh..heck, maybe even compare to Fusion 360 for the same part...mm...Might be a cool show !
@peterstevens6555 16 күн бұрын
Kia Ora ...just got my monthly power bill ...NZD$121.64
@SirTools 16 күн бұрын
Kia Ora, once the summer kicks here I'll be seeing those $350+ a month bills...oUCh...actually with your weather that one is not cheap mmm
@peterstevens6555 16 күн бұрын
@@SirTools Well that not bad really USAD$74.32 per month ...
@SirTools 16 күн бұрын
Just about dollar for dollar same here ...for now...SUMMER is coming to Texas and it will be hot and my electric bill will go up...
@sideshow6067 16 күн бұрын
Nice and compact :)
@rinlanmang5473 18 күн бұрын
Anyone reviewing this is not honest They’re being paid. I bought one to try it out and it’s very weak. Nothing like the ones from Home Depot. But you get what you paid for
@SirTools 17 күн бұрын
mm...no paycheck here mmmm still using it day to day and happy with it.
@Gavin789v 18 күн бұрын
I've been using JFEGWO for several years, and it has never let me down. It works well in both cold and hot weather, always providing enough power to start any vehicle I connect it to. For this price, you can't go wrong with this unit.
@SirTools 18 күн бұрын
Super thanks for this posting. It's always been a good one here for me. Like a brand name that you can depend on.
@peterstevens6555 18 күн бұрын
Kia Ora bro, Wednesday morning here ...
@SirTools 18 күн бұрын
HA !...>Kia Ora, we had a rough storm on Monday and so I had to finish up Tuesday to get this one done.
@sideshow6067 19 күн бұрын
Dang GOOD idea for rats next extension cords LOLOL..
@robbyadams306 19 күн бұрын
I used both brands for gardening for many years and can tell you the lowes ones last longer. They take way longer to get brittle in the sun. The home Depot ones go to crap after 1-2 years. Lowes ones last around 5.
@SirTools 19 күн бұрын
HEY....good to know
@claudiototaro5608 20 күн бұрын
hi, i'm from Switzerland, and i have this "little" toy at home (it works great), and an other CNC (vevor 3040 working only with Mach3Mill). I'd like to change the ER-11 collet by a ER-16 because i've some tools they are in 7 to 10 millimeters. I've tried to unscrew the 2 littles black screws, but it seems the part over the collet is glued to the main motor axis. is it the same on yours? Thanks a lot for your videos, it' a pleasure to see theme
@SirTools 20 күн бұрын
I've got to ask a question here. Do you have the upgrade kit ? The collet does the same trick here with the screws.
@claudiototaro5608 20 күн бұрын
Yes, the official 500w upgrade.
@SirTools 20 күн бұрын
Checked mine here and same deal mmm...
@claudiototaro5608 20 күн бұрын
A specialist just told me to put a dissolvent inside it, and if that doesn’t work, try to heat it slowly
@SirTools 20 күн бұрын
I was thinking heat, but.....gray area for me ....careful with the heat :)
@toolrestoration 21 күн бұрын
i do like honest reviews on youtube , can never believe the online written ones any more ! much better to see whats happening ! thank you . jim .
@SirTools 20 күн бұрын
Hey, thanks for this post
@petercallison5765 21 күн бұрын
The Sovol SV08 is the larger CoreXY at a good price that you are looking for. That will soon have a multicolor unit to with it.
@SirTools 20 күн бұрын
I want it, but Orca slicer is not my favorite....
@petercallison5765 21 күн бұрын
The bed size is set too low as the profile is for an earlier model. Orca Slicer has it correctly done.
@dannyhale7645 23 күн бұрын
Are you familiar with Direct Tools Outlet? You might find a deal on a charger and battery for that drill. DTO sells Rigid, Ryobi, and Hart Tools, and a couple of vacuum cleaner brands. It's all factory blemished or factory refurbished stuff. Their prices are great, and when they have sales you can get some really good deals. Shipping is reasonable from the website, and they have brick and mortar stores. We have two of them here in Missouri.
@SirTools 23 күн бұрын
Yeah, we had one near me in Florida, but nothing here around us. I'm going to find one at a Yard Sale, just a matter of time LOLOL..
@frigginpos 23 күн бұрын
I bought one directly after your first Vevor mag drill video. I love it!
@SirTools 23 күн бұрын
WoW....good to hear from you and hope it does the trick. I like the lower prices.
@peterstevens6555 23 күн бұрын
Kia 0ra, that looks like it would be a handy tool with metal work projects ...
@sideshow6067 23 күн бұрын
Great for any metal shop ! WoW...great price !
@SirTools 23 күн бұрын
A lot less than Northern Tools
@Spiderman-tg9ke 23 күн бұрын
I just purchased an ALLPOWER 2000 watt solar generator with 400 watts of solar panels for 1200 bucks tax included from Walmart. Competition is bringing down prices big time
@SirTools 23 күн бұрын
Would be nice to see prices coming down. We've kept the ALLPOWER solar gen here for emergency needs. They seem to be a solid product. 🤠
@luizpustiglione1269 23 күн бұрын
Do you think the rails and screws can be changed to make it longer for larger products?
@SirTools 23 күн бұрын
mmm...I'm thinking why not ?
@luizpustiglione1269 23 күн бұрын
@@SirTools I have an xcarve and have see. Projects to extend the rails but it is my current working horse to risk having it down. I might try to get that done with a TTC. Thank you from Houston.
@GuysLightburnLaserGuides 24 күн бұрын
Love the video bro. Beautiful honest thoughts 🎉
@SirTools 23 күн бұрын
I try to get real on this stuff
@pleappleappleap 25 күн бұрын
How about the Harbor Freight bucket?
@SirTools 25 күн бұрын
We need to get one and do some research