Thanks this was very helpful

thank you

I don't like auto zone either

PCM IGN Fuse under hood upper left 10A mini fuse.

Great video. Honestly, After watching this, this will save me close to $500. In fact, Pep Boys wanted to charge me almost $500 to do this. IMO, these shops are full of crooks. I know this because my high school friend owns his own mechanic shop. Its a shame how these POS's exploit people. Especially when they exploit unknowing women.

Replaced multiple relays for short term fixes. The relays were fine though. The issue was the fuse box not being securely mounted. It is secured by two bolts going through the relay box. They would not tighten securely, creating intermittent starting. Back the bolts out some, slide in a slip lock washer or piece of curved wire under the bolt heads, and tighten.

I bought one and Im going to keep it in the glove box in case this happens to my Enclave!

I'm having same issue on my 2010 enclave I do hear an electrical click noise coming from starter area. Can it still be the relay? Please help

Update: This did NOT solve my issues and i ended up having to have the timing chain replaced before an eventual failure happened, with working a regular job and weather being an issue i took it into a local Buick dealership to have them do the work, as it would've taken me 2-3 weeks to tear down and replace on my free time. The cost was around $2300.

Hey, where there any symptoms for the reason you replaced the sensor? My buick won't start now, it was losing power before it died. The codes that I found on this rig is p0016, 17, 18, 19. p0008, p0009. Just curious if all 4 sensors bad on my rig and maybe why it doesn't start.

Question did u disconnect the battery to change these

Side detection system ran a feed back into dash modules for me. Unplugged them solved the problem. Symptom no locks, no fob, no radio, no battery gauge, no crank, no signals, no power windows, antitheft light would come on and stay on when battery dropped to zero on dash. New battery also read 11.6 volts, as well as old battery. Side detection caused feedback, pcm told modules to shut off, and engine to not crank. Fixed it after new battery and paid tow truck driver to bring me home. Hope this helps someone.

Hey thanks for the information it was right on point

Did that solve your problem?

Hello! Seeing if you can help with your opinion on the below information please? Do you think it could be her Timing Chain Stretch out? Of course, hoping its not. These two codes are coming up (P0016 & P0776) on my daughters 2012 Buick Enclave. The vehicle cranks up and stays on, but it won't move when my daughter puts it in drive and/or reverse. Thank you for whatever information you can give! The following shows for each code are as followed...... P0016 (18/21) Permanent Crankshaft Position - Intake Camshaft Position Not Plausible P0776 (16/21) Pending Pressure Control Solenoid Valve 2 Stuck Off

Hello! Seeing if you can help with your opinion on the below information please? Do you think it could be her Timing Chain Stretch out? Of course, hoping its not. These two codes are coming up (P0016 & P0776) on my daughters 2012 Buick Enclave. The vehicle cranks up and stays on, but it won't move when my daughter puts it in drive and/or reverse. Thank you for whatever information you can give! The following shows for each code are as followed...... P0016 (18/21) Permanent Crankshaft Position - Intake Camshaft Position Not Plausible P0776 (16/21) Pending Pressure Control Solenoid Valve 2 Stuck Off

Hello! Seeing if you can help with your opinion on the below information please? Do you think it could be her Timing Chain Stretch out? Of course, hoping its not. These two codes are coming up (P0016 & P0776) on my daughters 2012 Buick Enclave. The vehicle cranks up and stays on, but it won't move when my daughter puts it in drive and/or reverse. Thank you for whatever information you can give! The following shows for each code are as followed...... P0016 (18/21) Permanent Crankshaft Position - Intake Camshaft Position Not Plausible P0776 (16/21) Pending Pressure Control Solenoid Valve 2 Stuck Off

The best video I found here, thank you very much! You are clear on all, steady hand movement with the camera, and can understand all you said. Again, thank you for posting!!

😢 iam called harold iam screwed all garages are booked in advance 3 or more weeks. Soo I have no other choice but to do this oil pressure sensor bad boy !!! GOD HELP ME PLEASE.

What if the sensor does not want to come off. I've been soaking that bad boy with ( FREE ALL )deep penetrating oil. I hope it helps. Future videos should include what if it is real stuck.

Superhuman cool points to you for figuring this out!! It’s been kicking my butt for months!!! Thanks man!

Thank you so much 🎉❤

Fuck! I check the relay with an old one from junkyard and mobile mechanic said starter, replaced that.. then he went mia, another bullshit ass mobile mechanic said the computer was fuct, got one and still the same fuckin problem- ima go get a new starter and ignition relay in the morning and God i hope it works!! Pray for me people!! I need it!! Will update… 🤞

I have this problem right now 😢😢

Thanks!! My 2010 doing it now!

THANK YOU FOR A GOOD SHORT VIDEO.

You got a bad girl I got one rn same color just black rag top, same color insides as yours and wood grain to

I switch mines out n still no crank I have a 2011 Buick enclave cxl

I started to replace my "B" sensor and the rain started. I think I touched the wires on the top of it because it now works so no reason for replacing it now.

Are all 4 camshaft sensors the same part number or their diferent?

Hello my friend and thank you for your valuable information,, Do you know if this is the same procedure for my acadia 2008 slt? I'm confused because I heard that it's the same for acadia, traverse, enclave .. Is this true?? Thanks.

Years ago that I was told if you replace one you replace all four.

Will this fix code p0017 Crankshaft Position Camshaft Position Correlation Bank I Sensor B

A little confusing when trying to follow your relay numbers so I bought both. Clarification: “CRNK”: 2752 -> 0114 “IGN”: 2753 -> 0113

Who all that type of work. I’ve replaced 3 since 2009

I'm having the same problem but I wait a few minutes and it starts up I will try a new relationship switch

Question b4 you replace the part when driving would ur battery gauge start to lowering?

When turning the key do you get a whirring noise?

I am having same exact issue with 2013 Buick enclave in 6/2023. Autozone said scanner read " good battery, good starter and good alternator". It also gave no codes. The young worker said it could be a starter relay. Your video had confirmed it. I will go immediately to buy these parts.

The whole first minute you described my exact situation and the wife's response. You are a man of the people.

An absolutely fantastic video. I’m having the same problem with my 2012 Buick enclave with all the bells and whistles and trouble the other night coming home screen got darker and darker and darker less voltage all of a sudden just quit! It looks like to me it’s a simple fix it’s gonna do it. I’m gonna get one today and put it in! I’m 77 years old a shade tree mechanic from back in the 60s. This video is fantastic. Thank you so much.❤🎉😊

Was finally able to get it after all ! Thanks for video,

How does the clips unplug, ughhh

Hey bud I just bought an 2010 Buick enclave and it crank I drove it for about 5 miles it ran hot and it cut off and I let it cool down put antifreeze in it got a new battery for the car and still will not start what do you think is the problem

Hey, I'm pretty sure I bought this car from you. Can you remind me, there was a check engine light, something about a fan that needs a connector clipped off to get rid of the check engine light? Thanks hope all is well.

I'm having this exact issue but today it cranked and would not start???

Great video. I'm just a little confused which relay did you replace the crank or the ignition relay I'm too cheap to buy both. I'm having the exact problem with my wife's

Thank you for taking the time for the video and part information detail...

Replaced this and would not crank still. Had it towed to house and cranked with a jump at house. Has cranked every time so far for four days

Mine is doing exactly the same thing. Thanks to your video, I now know what to do! Great information! Thanks!