Even thought this video is a few years old it was very detailed and helpful. I purchased this model at a yard sale and tried it out today. It works like a charm and was very easy to use. I was even able to vacuum seal some rather wet vegetables by using a large size bag and hanging the bag over the edge of the counter to let gravity keep the liquid at the bottom of the bag. Thanks for making such a clear video.
@sapanpatel4422Күн бұрын
Did you use 5/8 diameter blades or 7/16th? The local mower shop told me my snapper takes 7/16th diameter blades.
@riggsКүн бұрын
This video from 9 years ago helped me out. I'm in the process of upgrading my i5 4690K to the i7 4790K to squeeze a couple more years out of it. 2nd hand 4790's are going for peanuts now so a good bang for buck upgrade if you do light gaming or editing with an older motherboard.
@PaisteboyКүн бұрын
I'm glad that it helped.
@fredhalperin80834 күн бұрын
Solved the very same issue a neighbor of mine was dealing with. Thanks
@Paisteboy3 күн бұрын
You're welcome.
@shelshele5 күн бұрын
Thanks for the video. I always have worked by the saying don’t work harder work smarter. Get a Jack lol
@koolaidjammerz916 күн бұрын
How much do you think a mechanic should charge in todays market to do this job?
@brianwolf290215 күн бұрын
I know this video is 11 years old, but a 214X1PR isn't a commercial model, your father in law just has the wrong bag. The difference is minimal from an extra tough - a 5hp i/c motor, extra handlebar brackets, longer handlebars, no safety bail - but a commercial bag shouldn't fit this properly.
@Paisteboy13 күн бұрын
Ok.
@aliguzel487117 күн бұрын
I am really thankful for this video, I have the same exact problem.. I will try to fix it by my self because I cannot pay for a repairman to come, so thank you again 🙏 ❤️
@Paisteboy13 күн бұрын
I'm glad it helped.
@ryanb665817 күн бұрын
Techempsu comes stock on the rupp, I have a 71 bandit and just put a new carb on, it idles but when I give it gas it stalls but not sure what to tune to get it working
@Paisteboy17 күн бұрын
@@ryanb6658 Right. This is a small snowblower engine just to get it going.
@Laura-zy3th19 күн бұрын
Thank you! I have a different model, but you just pointed me in the right direction!
@Paisteboy19 күн бұрын
Glad I could help!
@Laura-zy3th19 күн бұрын
Thank you! I have a different model, but you just pointed me in the right direction!
@Paisteboy19 күн бұрын
@@Laura-zy3th You're welcome. I'm glad it helped.
@dougiep2769Ай бұрын
I bet the scenery and trails are awesome there.. im jealous
@PaisteboyАй бұрын
It was the best riding of my life. I hope to get back up there next season. Thanks for watching.
@RichardsonMommy5Ай бұрын
I watched several other videos and STILL couldn’t get it to work!! I watched yours and it WORKED!!! Thank you so much!!
@PaisteboyАй бұрын
Glad I could help!
@johncasor9698Ай бұрын
i have the same mod# 9051005 ser#013347 and is a great machine, cut the ground no problem so easy to use... a real work horse... i sold it, and today the guy ask if i want it back ??? yep. got it for $300 Haha sold it to him for $400 he never used it, but the tires are junk, getting new ones tomorrow $64 for 2 Haha... so happy, yep everyone wants to use it... Haha... you know i was just thinking about this unit last week, thinking i should of never had sold it, that was a stupid thing to do, the new units are a lot of money and made of tin,,, just junk... so happy now... i will never sell this ever...
@PaisteboyАй бұрын
I think they are really well built. I paid 75 bucks for mine about 16 or 17 years ago.
@60BloodyChamp60Ай бұрын
9 days ago? On a mower I can find very little information about? Nice! I have a very old 350Z and most parts you can buy for it are parts for this model. My left blade fell off a year after replacing the spindle and tightening it back with a pipe. I hope the bolt just came lose but if that were all it seems like it would have happened sooner. I put it back on with a normal wrench and no pipe to tighten, and it became loose again without coming all the way off after a few minutes of running and the blade, washers and bolt got real hot. The spindle was NOT hot. I’ll super tighten tomorrow with a pipe again. If it comes lose again what might be the problem?
@PaisteboyАй бұрын
You may want to try adding some lock tight to that bolt next time. Not the permanent type but one that will hold it on better. I used my impact gun to put mine back on and no issues at this point but most people don't have an impact gun. Best of luck and thanks for watching.
@traveldog23Ай бұрын
Thanks for the great video, because the instructions were straight trash, great product but instructions were hot garbage….👍🏾
@PaisteboyАй бұрын
I Misunderstood what you meant at first but I'm glad that the video helped you. thanks for watching.
@SometimeIsNowАй бұрын
Happy Father’s Day Paiste ! The deck and blades were in great shape for the year 👍🏼 Hope you and the family are having a great summer. Take Care my friend
@PaisteboyАй бұрын
Happy Father's Day to you as well. I watched both of your ATV videos, but I couldn't comment since I watched from the TV. We've been talking about getting some 4 wheelers, too, except Gary, but haven't yet at this point. It looks like a lot of fun! Dave said I could use his other quad sometime this summer. Maybe the three of us can go. We can talk about it soon. Take care buddy.
@SometimeIsNowАй бұрын
@@Paisteboy That’ll be great if down the road you guys picked up some wheelers. I figured if the winters keep getting worse I’ll at least have something to ride. Ugh.. 🤦🏼♂ Sounds like fun if you get to use Dave’s other wheeler and take a ride with us. 👍🏼 We rode from Winona over to Timberview for lunch and then back totaling 91 miles. It was great day. TTYS buddy.
@PaisteboyАй бұрын
We will definitely have to the one ride with Dave's wheeler. For me, it's more about not having a place to keep my trailer at home in the summer as I can't block access to my backyard all summer. Maybe if Zuke and I get a landscaping type trailer and use that for a couple of quads. We'll have to talk about it.
@SometimeIsNowАй бұрын
@@Paisteboy I totally understand your dilemma with having enough room to keep one more trailer.. I just picked up a new drop gate aluminum landscape trailer for the wheeler last Friday and I had to figure out where I’d keep the thing without it sitting on the lawn and having to mow around it. 😂 I did the hauling in the back of the truck thing the first ride with ramps but removing my Tonneau cover every time to go riding wasn’t an option so I decided to get a trailer. You’ll have to get ahold of me “sometime” and we can meet for lunch again 👍🏼
@PaisteboyАй бұрын
Sounds good!
@daveatkins4022Ай бұрын
How do you like the 360? Do you try mounting it in different spots?
@PaisteboyАй бұрын
I really like the 360 camera! I do have the selfie stick that I can mount on the rear bumper, but I haven't tried mounting it anywhere else yet. Maybe next season. Thanks for watching Dave.
@ChicagoSince80sАй бұрын
My Master Touch & a medium size Vortex both arrive Tuesday, I appreciate your video and the proper way you broke down the setup
@PaisteboyАй бұрын
Awesome! I'm glad that you liked the video. Happy grilling!
@laurajackson7594Ай бұрын
I personally didn't need the excess commentary going over the little tricks like inserting the screws in a star pattern just to be safe... But I LOVE THAT YOU GAVE IT!!! After working at Home Depot for 4 years, and having a swimming pool business for 8 years before that (because I made more money doing that than with my bachelor's degree from ASU 🙄😡) that kind of information is second nature to me... but NOT TO EVERYONE! And it's extremely important and helpful to know! There were a few things throughout the video that you addressed like that, and I found myself feeling so relieved that other people, not as mechanically inclined, will save themselves a lot of time and straight up heartache! By watching your video first. That was important to me at Home Depot. Making sure people did it correctly the first time, saving them time AND MONEY! And also, tackling their attempt with a confidence and reassurance that makes a truly simple task, JUST THAT! SIMPLE! I FREAKING LOVE KZfaq!!! AND! People like you who take the time to address all ranges of skill level in their videos. You ROCK! I liked and subscribed and will also be sharing your channel with prior coworkers who can then share it with customers. Thanks again for being so thorough! ☺️💞 🙏🏼
@PaisteboyАй бұрын
Thank you for the kind words. I really try to help people when I'm making videos like this. I understand that many won't need as much instruction, but I add it in for those who do. Thanks again for subbing, watching, and sharing.
@52stevedo4Ай бұрын
This is why I never throw anything away . I always feel like a winner when I dont have to go to the store to buy parts .
@PaisteboyАй бұрын
Exactly. Thanks for watching.
@davidv775Ай бұрын
I hope your wearing a mask😮😷
@PaisteboyАй бұрын
👍
@kerstinsmith9782Ай бұрын
Thank you!!
@PaisteboyАй бұрын
You're welcome.
@WayneTDowdy3Ай бұрын
Thanks! I have the same lack of engagement but began at the levers, which was not a good way to get started. Then I looked underneath but still don't know. And actually, I did begin removing the cover as you did, then stopped and looked underneath but haven't figured out the problem. Now I will try your approach. 😊
@PaisteboyАй бұрын
Good luck.
@WayneTDowdy3Ай бұрын
@@Paisteboy The engagement cable is broken, where it attached by the pulley.
@PaisteboyАй бұрын
Ok. 👍
@CraigArndtАй бұрын
Kawasaki are smooth engines. Have one on my Gravely walk behind.
@PaisteboyАй бұрын
Nice! Now with all of the parts shortages and Briggs and Kohler issues I'm really glad that I got the Kawasaki engine. Thanks for watching Craig.
@dominator5498Ай бұрын
Thanks for the video Buddy...Hope you are having a great summer!
@PaisteboyАй бұрын
Thanks buddy, you too! I hope this coming snowmobile season makes up for last year's terrible season. I think last season was worse than the 2015-2016 season when I go my Blizzard. I guess I'll mow the lawn and ride the Harley a bit until then.
@ffschoblocherАй бұрын
Wow 6 years? You should honestly sharpen your blades a few times a season. Dull blades tear the grass and make it more prone to disease. I know riders are harder to maintain than push mowers but hopefully its not another 6 years before the next maintenance. 🤣
@PaisteboyАй бұрын
No. Next time, it will be much sooner since I can remove the deck really easily. I only have. 28 acres, and the deck is 48 inches, so the mower doesn't run for very long each time. I only have 60 hours on the machine.
@bigdaddy490Ай бұрын
That is a crazy location for the grease zerks on the blades. My ferris has them on the top of the spindles so you can do it easy. I just scrape the deck out with a scraper once a year.
@PaisteboyАй бұрын
I agree. It would have been better if the grease zerks were on top. Thanks for watching.
@stew8834Ай бұрын
Bro you uploaded this video earlier today?. Did you delete it ?
@PaisteboyАй бұрын
Yes. I had to add the disclaimer that I installed the blades upside-down. I fixed it today. Thanks.
@stew8834Ай бұрын
@@Paisteboy right on bro. Won't be lo g and your will be on your sled hitting the trails. 👍
@PaisteboyАй бұрын
I know right! I just hope this next season is way better than last season!
@hartmutchamuelwormann2058Ай бұрын
Can I ride this bike with 120 kg bodyweight?
@PaisteboyАй бұрын
No. It's too heavy for the suspension.
@btexpress3356Ай бұрын
Are all the lock keys the same for all locks? So if someone buys a lock, can they open your lock as well?
@PaisteboyАй бұрын
Of course not. This isn't a lawnmower key. It's a real key and lock. You can buy a 2 lock pair together that uses the same key for both locks as I did since I have 2 bags.
@judyholliman2870Ай бұрын
Worked like a charm! Thank you so much.
@PaisteboyАй бұрын
You're welcome. I'm glad that it helped.
@thereaper1820Ай бұрын
Do those need to be torqued ? If so, what are the specs?
@PaisteboyАй бұрын
Not that I'm aware of.
@phillipyannone3195Ай бұрын
Yup what Mr Jeffy said.😊
@PaisteboyАй бұрын
👍
@robertevans6889Ай бұрын
Thank you sooo much for posting this video. You made it easy to fix and we really appreciate you sharing this. God bless you!
@PaisteboyАй бұрын
You're welcome! I'm glad it helped.
@redrock198Ай бұрын
It sure did. Thank you
@PaisteboyАй бұрын
You're welcome.
@tbone2859Ай бұрын
You sir are my new hero! Tried a ratchet strap ( too long to get around a wheelbarrow tire and ratchet up) Starter fluid and a torch( nope) rope( nope) then came across your video. Grabbed an old belt and…… done! Wish I would have found you two hours sooner! Subbed and a HUGE thumbs up. Thank you!
@PaisteboyАй бұрын
I'm glad you found my video, and it helped!
@carlp9120Ай бұрын
That was an awesome first cook! In hindsight, you could have removed the done rack and finished the other two. The fewer the racks, the better the presentation. You can cook three or four and they will taste just as good, but they won't be as pretty.
@PaisteboyАй бұрын
Thanks for the tip.
@alliehunter9896Ай бұрын
Do you wish you got the 28 inch? I'm struggling with that
@PaisteboyАй бұрын
No. I wish I got the 36". I got this one because of its small footprint. I will get a 36" sooner or later.
@JohnSwartz-mn7lnАй бұрын
Looks good, great job 👍🏻
@PaisteboyАй бұрын
Thank you! Cheers!
@bvnseven2 ай бұрын
the metal screen at 2:40 can be removed and cleaned out, stuff gets past that screen too. clean the needle and seat also. if the blower ran fine before this, neaning hi and lo screws were correct then they should be fine afterwards. I would think about getting a carb kit if the adjustments don't work. Clean out the carbon in the muffler,spark arrestor.
@PaisteboyАй бұрын
Thanks for the tips.
@dennisecortesrojas27912 ай бұрын
Tienes información de este refrigerador porque no está entrando el compresor donde podre conseguir el compresor
@Paisteboy2 ай бұрын
Sorry, I don't.
@jacobmora30392 ай бұрын
Can someone tell me where the battery is in this model i got one in a trade and looks to have no battery anywhere
@Paisteboy2 ай бұрын
There is no battery on that sled.
@jacobmora30392 ай бұрын
Thank you. @@Paisteboy
@Paisteboy2 ай бұрын
👍
@ernestmiles49012 ай бұрын
Thank for the information.
@Paisteboy2 ай бұрын
You're welcome.
@marcelausategui70062 ай бұрын
You need a telescopic magnet to pick up the lost screw..!! 👀
@Paisteboy2 ай бұрын
I have a couple now. I'm not sure if I had one back then.
@marcelausategui70062 ай бұрын
I did it according your guidance, but found easier to, first put the belt behind the pulley, RELEASE the tension spring and easily fit the belt on the second wheel.. THANK YOU..!
@Paisteboy2 ай бұрын
Great tip!
@marktate44662 ай бұрын
Where you get the cool kick stand?
@Paisteboy2 ай бұрын
The kickstand is an accessory that came with the unit when I bought it.
@kkarrish2 ай бұрын
I was hoping you'd figure out the turtle speed I got this from a friend no idea how I Work It I was almost running behind it
@Paisteboy2 ай бұрын
It's been a while, and I don't remember it being difficult to slow the mower down. This was my neighbors mower, so this was the only time that I used it.
@kkarrish2 ай бұрын
I have this John Deere love it
@Paisteboy2 ай бұрын
Nice!
@brendaelliott97672 ай бұрын
Cannot THANK YOU enough for posting this video. My sister has this same model Whirlpool refrigerator. Somehow their icemaker had gotten set to off. Read manual, but to no avail. Turned to KZfaq and found your video. Problem solved in a split second. Thank you so much!!