The Topless Mechanic

Пікірлер

@PankajPatil-ok9iq 3 күн бұрын

did your car not move in reverse when this problem occured? i have 2008 crv when i scan it shows solenoid valve B stuck open

@assv6330 17 күн бұрын

how much torque

@Huss300 Ай бұрын

Hello.. Sorry for my bad english.. Can anyone help.. I want to know whether the DUAL LINEAR SOLENOID of 8th gen 2.4L accord automatic can be used on a 7th gen 2.4L accord automatic? My 7th gen accord 2.4L automatic is having shift delay when shifting from 1st to 2nd gear and it also slips when shifting, it only shifts when i let of the throttle, but it shifts fine when shifting to other gears without letting off the throttle.. Because these 7th gens are rare here their spare parts are not easily available in the used spare part market but the spare parts of 8th gen accord are available. Note: the part number of the DUAL LINEAR SOLENOID of both 8th gen and 7th gen 2.4L accords are different but they appear the same.. Please anyone help me...

@daffamaliqshakeel0733 2 ай бұрын

Good

@luismunoz6281 3 ай бұрын

It could be the solenoid in the starter or it could be the crankshaft sensor the upper and the lower I have a 2004 Cadillac deville and I have that same problem and that was the issue

@Joker-wj6dc 3 ай бұрын

Question does this help with the A/T clutch pressure control solenoid valve c? And code is P0970

@EveFrag 4 ай бұрын

Run a new ground my boy

@jeffreyfelder7981 7 ай бұрын

It's going to be the engine ground wire. ...run a good ground to the block and it will fire up..

@tomasjaramillo8328 7 ай бұрын

I just replaced a fuel pump on 2000 DHS . Before new pump I had a crank but no turn over now I have a clicking start no crank, any advice that might be the next cause of no start ?

@luismurillo4155 7 ай бұрын

same problem here ive replaced alternator battery starter and crank shaft positioners both top and lower i know the car will turn over as i jumped it with the fuse out so i know the engine is good is just the click

@eyjatjatt2301 8 ай бұрын

hey bro, what if i tighten up the bolts? is it okay? bcause i dont know when to stop tighting it and what is the actual lock

@Juancarlos-wz7nj 8 ай бұрын

But that's not the correct part number

@mohamedbadawiammar2561 9 ай бұрын

Can you please share the part numbers

@rockydavis7448 10 ай бұрын

Part number for the single solenoid gasket?

@crazy_ninja7487 11 ай бұрын

Can you do the removal of the solenoid without having to drain the transmission fluid?

@jerryg6923 Жыл бұрын

Finally, someone that doesn’t call it a shift solenoid 😄👍👍👍

@kazakhstan6107 Жыл бұрын

Hi. I opened transmission and I turned on . And I closed . I don't know why kick

@tanerayvaz2590 Жыл бұрын

Bu seelonoid çalıştığını nasıl anlarız araç içinde sürüş yaparken

@jamilanderson601 Жыл бұрын

What are the battery adapter called

@israelpacheco5647 Жыл бұрын

Can you tell me the torque ft-lb?

@adityabhalerao3153 Жыл бұрын

Thank you brother

@edgarcorrea6085 Жыл бұрын

I changed the solenoids, short time after light kept blinking... any advise

@ikechukwuwisdom7236 Жыл бұрын

Hey bro any update on this, I'm currently experiencing same.

@chuloramirez7388 Жыл бұрын

The code p0741?

@MrTbirdteddy Жыл бұрын

The CAR is a piece of SHIT , how this CAR cost more than a Lincoln LS is because people are gullible

@georgeelmerdenbrough6906 Жыл бұрын

So ....I am guessing the A switch is the single in the back ?

@georgeelmerdenbrough6906 Жыл бұрын

My screens look like short stsinless tubes . There is no rib . So I cannot tell if the screen end goes into the tranny or into the solenoid ?

@georgeelmerdenbrough6906 Жыл бұрын

My screens look like short stsinless tubes . There is no rib . So I cannot tell if the screen end goes into the tranny or into the solenoid ?

@Altruistic00 Жыл бұрын

My transmission have this jerking motion whenever I try to shift from N to D or when I slowing down & the gearbox is trying to get into 1st gear. Does this mean the pressure solenoid is the issue? But shifting into any gears besides the 1st are smooth tho. Just the 1st have this strong jerking motion.

@demetriushurricane8374 Жыл бұрын

did you know where the solenoid lock up A?

@demetriushurricane8374 Жыл бұрын

i mean the location of solenoid lock up A

@machitocars5247 Жыл бұрын

The guy in back ground gotta poop 💩 lol

@tobydyes 2 жыл бұрын

It's not the starter the started turning over

@dho 2 жыл бұрын

hmmm that looks like a 2nd gen, 2007 is a third gen

@Ramon.fpv. 2 жыл бұрын

Man, you have no idea how much i apreciate you for posting this video. I thought my crv transmission was done. I did exactly what u did here plus flushed the tranny fluid and is back running strong. Thanks a million 🙏🙏🙏🙏

@georgeelmerdenbrough6906 Жыл бұрын

Can you help me ? How do you flush a transmission . I am a complete novice mechanic . Trying to fix my daughters beater 08 Accord .

@Infamoussss 3 ай бұрын

@@georgeelmerdenbrough6906DONT flush. On older cars its safer to just drain & fill

@adamthelawnguy228 2 жыл бұрын

I got the same issue on the car, i just cleaned the selenoid and put it back but didnt work, if cleaning the selenoid dont work, i will definitely need a new part right?

@Leonhart306 2 жыл бұрын

How many uga-dugas to tighten the oil drain plug?

@christianomos6140 2 жыл бұрын

Please how do I get this same parts for Honda Accord 2006 please kindly assist me

@richr1029 2 жыл бұрын

job well done. I'm having shuddering from 2-3 so I ordered a new Oem part with gaskets.

@shadysimmons702 6 ай бұрын

Did it fix the issue? Having a similar one in my new 2006 element, throwing a code for the B solenoid and having intermittent issues going into 4th

@schmidt76ful 2 жыл бұрын

Does the solenoid in video cover first to second gear shifting thanks that’s my issue

@francoisd6942 2 жыл бұрын

Bad engine ground, the ground lead from the motor mount to the engine is broken

@dwyszomirski 2 жыл бұрын

what noise was this car making that it needed this repair?

@doglife5306 2 жыл бұрын

Awesome set of tools man!

@NTromb 2 жыл бұрын

What are the torque specs for the A&B shift solenoid

@justinbowles4671 2 жыл бұрын

Man I could use your help! I have two cables by the fuse box under the hood red and black and I’m not sure where they hook up! Any help would be appreciated! Thank you

@cpct.v2537 3 жыл бұрын

What code was coming up for this part im getting a p0979 on my 06 crv

@wewanthenny9875 3 жыл бұрын

How long does it take to repair

@ImVow 3 жыл бұрын

quick question my car over heated it started to smoke but i made it home safe thank god but it was over heated bcuz no oil what should i do pour some oil right after the smoke ? or wait next morning ???

@toplessmechanic 3 жыл бұрын

If it overheated because of no oil more likely than not you’ve damaged a few crank bearings. If you’re lucky add some oil to it and see if there’s any noises or misfires.

@ImVow 3 жыл бұрын

@@toplessmechanic i added some oil but haven't turn it on

@raymondwight8132 3 жыл бұрын

Could this be my problem My Honda pops out of gear to neutral I have to turn the key off wait for a bit and then it will go back into gear and run for a bit then pop out again

@truthhurtbad262 3 жыл бұрын

Mine is doing exactly the same thing

@jonwesleybraswell7683 2 жыл бұрын

So is mine?

@jonwesleybraswell7683 2 жыл бұрын

Did any of y'all get an answer?

@jonwesleybraswell7683 2 жыл бұрын

No fluid loss and no codes

@zeek439 2 жыл бұрын

Any answers to this question??