Build your own pole lathe? All I saw and heard was a narration
@spankitout Жыл бұрын
Miss titled your Bowl lathe.
@LitoGeorge Жыл бұрын
I'd have loved to attend
@dlsiefer Жыл бұрын
I understand that this is a teaching method. But would it be possible for you to do a timber project for me. If so please contact me for my email. Thanks Dan
@cutthecord3gn689 Жыл бұрын
Good info just wish it wasn’t filmed with a potato.
@garymiceli73212 жыл бұрын
a masterpeice
@BobbyJohnsDesignerOnFire2 жыл бұрын
Can't find the mirror tool in the warehouse???
@rickschuman29263 жыл бұрын
Very strange to view an class on cruck framing led by 2 guys who apeak American.
@angebrowne17303 жыл бұрын
Thank you.
@wboquist3 жыл бұрын
I don't think I understand the rule of thumb he gave at the start of the video - choose a log that is 1" in diameter larger than the large dimension of the timber you expect to produce. His example is of hewing a 6" X 9" timber out of a 10" log. If we use the Pythagorean theorem, we can determine that the hypotenuse of a right triangle that has 6" and 9" sides is the sqrt of (36 + 81), or about 10.82". To me, that means you would need to hew a log that is ~ 11" in diameter on the small end to get a 6" X 9" non-waney timber out of it. Anyone disagree?
@willbeemer3 жыл бұрын
You would have some wane, which is easy to deal with if there's joinery at that location. Also, that diameter is measured at the top of the log, which will have some taper so will be bigger at the other end. It a lot of work to hew off more material than you need to.
@wboquist3 жыл бұрын
@@willbeemerThank you for responding. I understand your point, but I also think that the rule of thumb is deficient in that it does not take account of the smaller dimension of the timber that is to be produced. Staying with the example of a 9" large dimension and a 10" log, if the small dimension of the desired timber was 5", a 10" log would be just about sufficient, as the square root of (81 + 25) is pretty close to 10". However, if the small dimension of the desired timber was 8", a 10" log would be too small unless a *lot* of wane on the finished product could be tolerated. I think it is worthwhile to just do the math, and have a more precise understanding of what you're going to be able to get out of the log.
@suckmyfnballs4 жыл бұрын
I found them. Unfortunately the don't work with 2018 Pro version.
@willbeemer4 жыл бұрын
Hmm; they've worked for me through all Pro versions to present.
@suckmyfnballs4 жыл бұрын
I searched for TF Rubies at Extension Warehouse and got "No extensions found". Am I putting in the wrong search term?
@willbeemer4 жыл бұрын
They are now called "Timber Framing Extensions". Author: daiku.
@joshrides20044 жыл бұрын
Yes please say “cruck” some more I’m totally not gonna go insane
@mariogatica23634 жыл бұрын
As your second bent, is a mirror from first bent, the knee braces where place on one side of the post and beam.....i think knee braces on interior bent, goes centered on post and beams right ???
@willbeemer4 жыл бұрын
No; in square rule edge layout the braces are usually flush to one face of the timber. It makes cutting the housing easier since it is open on one side, and there are other reasons. This all explained in detail in my book "Learn to Timber Frame" if you're interested. The middle bent is not a mirror but is identical to the first bent. The bent on the other end of the building is a mirror.
@mariogatica23634 жыл бұрын
@@willbeemer man...i just realize i am talking to a Will Beemer.......yes, thank you for your answer....i saw a video were a young guy (The Timber Frame Project) is building a small timber frame from your book....he talked about all his search for information on timber frame buildings, he came out with three books and their writers, and mentioned your book as the most usefull for him. I sure take a look into your book in the near future.....thanks
@woodyphyseter36714 жыл бұрын
Wow, i've been messing around with this program for two days and should have watched this video before starting. My plan is pretty, but all one piece. Are all of these features available with the free version of sketchup? which version are you using in this video? thanks, good video.
@willbeemer4 жыл бұрын
The Timber Frame Rubies are available for free but no longer work with SketchUp Make's freeonline version. They will work with older free versions of SU, I think up to 2018. They also work with the Pro version. The Solid Tools are only available for the Pro version. The Mirroring plug-in works with the free version. Look for all these plugins on the Extension Warehouse or SketchUcation. For the Rubies look under Clark Bremer as author.
@willbeemer4 жыл бұрын
Sorry, Clark Bremer's screen name is "daiku"; look for Timber Framing Extensions.
@Egor_ZDE4 жыл бұрын
@@willbeemer On sketchucation only: Clark Bremner: Toggle X-Ray/Perspective v1.0 Clark Bremner: Angle between Planes v1.0 Clark Bremner: Rename Component Instance v1.0 Clark Bremner: Rotate 90 around [X, Y, Z] axis v1.2 Clark Bremner: Repaint Face v1.0 There is no necessary plugin(
@mikeabbott4 жыл бұрын
Thanks for the acknowledgements (I taught Ben all he knows :) - Nice video
@slzckboy4 жыл бұрын
I'm salivating over the cruck frame
@willbeemer4 жыл бұрын
Cruck Framing course at Heartwood May 4-8, 2020. Registration opens Dec. 1. www.heartwoodschool.com
@vladimirlopez78405 жыл бұрын
Love that smaller chest
@rapunzeleh5465 жыл бұрын
this isn't 'building a pole lathe' - it's an advertisement for his course.
@williambeemer93615 жыл бұрын
True, and it states that clearly in the opening scene. There is plenty of relevant info in the video for people that want to build one, and they can take a course or find plans for the details.
@rennyli3476 жыл бұрын
A amish
@maxdecphoenix6 жыл бұрын
I'm more interested in the structure the lathes were under than the lathes. Is there video detailing its construction?
@williambeemer93616 жыл бұрын
The cruck timber frame is a scribed structure, and we have a video of the course we do every year at www.heartwoodschool.com/cruck.html. Our 2018 course just ended, but we will offer it again next year. Please fill out the interest form on our website to get updates.
@williambeemer93615 жыл бұрын
That is a cruck timber frame, and we have a week-long course that teaches the scribing and other techniques to build one. Please visit our website for our schedule, and there's a short video included on the course page.
@spymaine896 жыл бұрын
worthless failed to show ''joints'' on paper , building scale dimensions. failed to show finding , felling ''crucks'' .
@williambeemer93616 жыл бұрын
It's impossible to include everything in a one-week course into a 9 minute video. The 2018 Cruck course is full, but we will offer it again in the future. All the topics mentioned by spymaine89 are included in the curriculum.
@spymaine896 жыл бұрын
www.bing.com/images/search?q=cruck+frame+joinery&FORM=HDRSC2 . www.fonerbooks.com/timber.htm. ..................... wrong, its not complex , just observation. learn to scale; 1/2 too foot, or 1/4 to ft. whatever . interior/ exterior/ frame. YOU could show that , 10 mins. short course...... how i learned my 25ft boat would not fit in corner of timber frame barn, . not get around post, ha ha. so built her own door. , before barn built. 30ft boat is in main hall. ''with pencil paper ruler, art board ........you to can be an ''architect''.
@PennyGaffGallery6 жыл бұрын
Hi there, are there any plans available for building this lathe? Thanks
@williambeemer93616 жыл бұрын
Not from us, sorry. I'm sure a web search would turn some up.
@wboquist6 жыл бұрын
I took this class in another year. I strongly recommend the class and the school.
@MrAlembicMan6 жыл бұрын
Sorry Miki, I probably have no business commenting on the technical stuff other than I watched the video to learn more about timber framing. I am a painter by trade, but have been in construction my whole life. My claim to fame is I watched the video, and have a lot of books on timber framing. Happy Holidays to all! Whatever Will B says, would bet my money on that.
@Artheon6 жыл бұрын
Thanks for providing links to the plug-ins.
@colemcleod9416 жыл бұрын
How is your horizon perspective backwards here? (Getting bigger going farther away) Not that it matters I suppose, but how the hell?
@williambeemer93616 жыл бұрын
There is no perspective since the model is in parallel projection.
@mekkler Жыл бұрын
I thought the same thing. It looks like a reversed 1-point perspective.
@restezlameme7 жыл бұрын
I'm sold. Signing up for the newsletter right now. :)
@mikidominko30727 жыл бұрын
Just some thoughts : 1. that toothpicking the bottom parts of rafters is really funny/definitely not be able to carry the weight of the shingles + snow weight, is it some special "feature" - have never seen nobody doing that kind of weakening the rafter this way 2. bird mouthing the rafter and nailing it to the plate is usual practice, very funny you are notching the plate itself for that small triangle you sit the rafter in... 3. where is the ridge beam, connecting rafters on the top through the whole length? 4. At the end where you are exploding components to cut the mortises (exploding means its not component any longer) - other components are not ALL edited at the same time, so you would probably need to do each join separately - again ? Nice effort with this video lesson but I believe that you are starting to learn SketchUp(nothing bad in that - we all are, right?) but to me the "tutoring" here was not convincing at all - no pun intended, just me - thank you in advance for commenting on above technical issues/topics, kind regards
@MrAlembicMan6 жыл бұрын
It's not a toothpick it's steplapped if you watched the video you would see that at about 17 minutes into the video! Don't think you know much about timberframes, but that's okay. You don't need a ridge beam with common rafters.
@williambeemer93616 жыл бұрын
The 1.5" thick rafter tail cantilevered out 12-14" is plenty strong enough to carry 1" roof sheathing, shingles and snow at 32" o.c. Remember it's 5" wide. The step lapped rafter seat is a traditional timber frame joint that has been used for hundreds of years. There is no ridge because the rafters thrust against the plate (hence the step-lap) and the wedged dovetail at the tie beam resists it. Many timber frames don't use ridges because it's a lot of work to get it up there and not necessary with other joinery. The rafters are joined at the peak with an open mortise and tenon. Yes, I need to cut/subtract each solid joint separately but I don't need to explode the main component since I am copying the solid joint an pasting it back ("in place") outside the main component, then it disappears when subtracted.
@williambeemer93616 жыл бұрын
Sorry, meant to say the rafter tail is 2" thick on the 5x5 rafter. Thanks J. Mahoney.
@splithair26 жыл бұрын
Miki Dominko Mr. Beamer knows a great deal about timber framing and the joinery he is displaying here where the rafter meets the plate are called step lap rafter seats. They are a very common joint and have been used in timber frames for hundreds of years. The company I timber frame for uses them in frames we build today, though to please the engineers and the litigious we drive a lag through them. The old timers didn't use any lags and their barns are still standing. Mr. Beamer is far too nice to say straight out that you don't have any idea what you are talking about when you bring up your criticism but I have no such compunction. You have no clue at all.
@splithair26 жыл бұрын
Oops, sorry I basically said the same thing as you Will, I didn't even see your reply. And I spelled your name wrong to boot. My apologies.
@gravijta9367 жыл бұрын
Thanks for sharing this video!
@sethwarner25407 жыл бұрын
is there some way to get more rotations/powerstroke?
@gravijta9367 жыл бұрын
Lowering the diameter of the spindle would help, but not by much. You'd need any type of torque converter like a pulley or gearbox for a significant change in rpm.
@sethwarner25407 жыл бұрын
I was referring to revolutions per stroke, not speed of the shaft. I might try a much longer spring-whip, and a longer treadle(which would operate the spring in a significantly longer distance of travel).
@gravijta9367 жыл бұрын
Whether you're referring to rpm or revolutions per stroke, my answer still applies. A longer spring-whip and treadle will only get you so far and will make it awkward or even dangerous in extreme cases to operate. The best thing to do is decrease the diameter of the spindle to increase your revolutions per stroke, otherwise you'd need a torque converter.
@sethwarner25408 жыл бұрын
when is instruction going to start? Is there a website, or you tube video?
@fridunanti9 жыл бұрын
waist of time
@ImprovisedSurvival9 жыл бұрын
Liked and subscribed! Thanks from Chicago
@AugustusLarch9 жыл бұрын
The measuring and chalk lines is wasting time. Just start cutting already. The old timers cut so many timbers they didn't need any lines. I need to make a video of this because I do this all the time on logs not as nice as this.
@wboquist6 жыл бұрын
@AugustusLarch - Have you made that video yet?
@chrismaurer20755 жыл бұрын
I'm sure he hasn't, he was also criticizing one of the Northmen using a stone to sharpen his axe.He said he was wasting time that he should just use a file ,if he knew about axe's he would know you can't use a file on quality axe's with properly hardened steel.
@LukePighetti3 жыл бұрын
@@wboquist there are some comments on KZfaq that aren't worthy of a follow up
@mynameisHOPKIRK9 жыл бұрын
Very nice.
@PurpleSwan9 жыл бұрын
This is a commercial and not an instructional video.
@schpoingle9 жыл бұрын
cool. one day...i'm gonna try one. thanks for talking about it and sharing.
@mistykiwakjacobs88649 жыл бұрын
I would like to place an order for six chairs.
@rm4274910 жыл бұрын
Nice ponytail.
@jasondavidjian40310 жыл бұрын
wish the video was the whole session
@jasondavidjian40310 жыл бұрын
Jack Sobon is my hero
@the430movie11 жыл бұрын
This is cool. Green wood working the way it should be!
@wboquist11 жыл бұрын
I have taken several Heartwood classes (though not this one) and recommend them. If Jack Sobon is involved, so much the better. He combines an encyclopedic knowledge of the subject with a great sense of humor.
@MGspiderwebb12 жыл бұрын
heartwood was one of the best experiences of my life. the 2006 apprenticeship year was amazing with Zach, Vinnie and I. I can't believe it has been 6 years since i arrived at heartwood and moved into the loft above the school room. Will and Michelle you guys will always have a special place in my heart. love you guys, Mike Webb