Please I need your help, my LR4 Discovery is not starting. It's been 2 weeks now my mechanic don't have a clue. The system is detecting crankshaft sensor. We tried fix another one but still it refusing to start. I am getting so frustrated with this. I need help!

Nice one 😊cheers

I’ve come across a problem on my Giulietta, when I’m braking my rear wiper goes off and can’t manually use it from the control by the steering wheel, any ways to fix this?

I can open the drivers door from the inside at the moment but I can't open it from the outside. I have to climb through to open it which is obviously not ideal

hello i have a question that l hope you answer. I own a 2012 G and i don’t have reconfigurable display, my menu and headlight adjustments just like yours. Did you change your display? If so how can i change mine? Thanks in advance.

The aircon doesn’t work on my Giulietta 2010 anymore. I’ve taken it to a garage, they tried regassing it but it still doesn’t work and they told me I need to change the compressor (around £600 including parts and labour). I’ve just had a look at that wheel that is only supposed to be spinning when the AC is on. My is always spinning, whether I have the AC off or on. Does this sound normal? Here’s a video kzfaq.info3cZOm6yAXLY?si=DS-42xu1e60BzfEI

Hi, thx for this video😊, i have 1 question: can we clean the maf with brake cleaner? or something else maybe without having to buy this spray? THANKS

What is size voor drive shaft how long mm? Opel corsa D 2007 ?

I need to do this with my Alfa Mito for replacing a front fog light bulb. But I’m a little bit scared because I don’t know if I’m doing well 😅

Did you need to take it for alignment after strut replacement, thanks.

Yep had the dodgy compartment, the battery change, the wiring loom and issues with lights and wiper, the window switch...I'm still waiting on my passenger airbag. One other great fault seems to be the bluetooth module failing and causing residual battery drain, that's a fun one!

Hi, can you tell me, if it's not a secret of course, which stores you buy spare parts from? I need drive shaft seals for the gearbox of a Corsa D, and as in your last video, I also need to replace the rear shock absorbers. Thanks for the answer :)

Just wondering if this is the problem I have. I dont have any issues with dashboard saying a silly temperature but multi-ecu says that one of the two external sensors reads -40, the other reads normal

Have to thank you for your old video on removing the door cards from the front doors of the Giulietta. The vinyl on mine has shrunk so they are off to the motor trimmer to be fixed.

Thanks for this video. I’m going to replace my suspension arms soon. Is there any chance you are making a video on replacing the front wheel bearings?

Thanks!

I was looking for a video exactly like this one. Really appreciate the good job! Cheers

I have three cars equipped with the Fiat 1.9 turbo diesel and I use the same oil in all three - Mannol 5w-30 ACEA c3 Fully Synthetic. It meets Dexos 2 (GM) and BMW LL04 (Longlife). Part number is MN7908 and it costs around £15 for 5 litres. I also use Mannol coolant and oils in my family fleet of petrol cars (including an E39 540i) never had any problems and I do an annual oil and filter change (under 10k) each summer for all five cars.

I am a new driver and I like the Giulietta, I want to get it as a first car God willing and I have seen that it has no foot rest for the clutch. Is that an issue I should be worried about

Want to thank you for posting this.. i need to determine a check engine light on my qV, car is working just cannot clear it

Thanks a lot for your help. I don't find the same in French, for a french car! Strange, no? Have a good day.

In newer handbook it says 0W30 (Selenia Digitek P.E.) oil for 1.4 tb engine with MultiAir, and 5W40 (Selenia StAR P.E.) for just 1.4 tb 🤔 what do you think?)

It is also important to comply with the certifications (E.G. FIAT 9.55535-S1), I have had issues due to ash and sulfur composition, even though the previous oil was ACEA C2 too!

Great video! My glove box handle has broken and can’t currently open it, any idea how I can get pst it?

Just replaced passenger side door handle. What a FABULOUS instructional KZfaq. THANK YOU!

Vauxhaul corsa e 1.4 turbo owner here.... i did not drain the gearbox on mine before taking out the cv axles. Well after managing to pull out the first axle, all of the gearoil flooded the floor 😢 I even had to fill um my gearbox with the wrong gearoil ( 80W90 instead of the recomended 75W80 ) because i only had that at my mates garage. I hope it did not do mutch damage on the way home. I will change it out tomorrow

I used Castrol Edge 5-40 which conforms to the C3 ACEA. When I had my Chrysler Delta with the 1.4 multiair, 140 hp from 2014 to 2021. I never had any problems...

Very well explained.

Cheers mate! Doing the same for my Astra soon!

I prefer to use Selenia Quadrifoglio 5W-40 - for 1.75 TBI Engine. Replacing oil for every 30.000 is dramatic nonsense - it will kill your engine especially when you have MultiAir. I prefer to change it every 10.000km with all filters.

Simple; always abide by the certification standard. On my current Giulietta, the oil standard is Fiat 9.55535-GH2. Currently (seems to be the case for all I can find) only Selenias are "certified" for Fiat standard. But you will find manufacturers that produce oils with certain spec even if not undergoing the manufacturer's certification programme. In my case, I can use the Selenia, but Motul, Fuchs and Ravenol all have a -GH2 product

With a Euro 6 multi air 170, it's 0/30 and I really check now. . A while ago I thought it was getting a little lumpy for a second on start up but no issues.. A service at dealer & put 5/40 (euro 5) oil in and multi air went to bag of spanners on start up. Like running on 3 cylinders Multi air replaced by dealer.. I found shell helix ect ultra has fiat GS1 spec and using it fine, it's nice and clean inside rocker. Liquid moly also do a 0/30 up to spec.. My point is check the spec the car takes as changes over cars life cycle, and check ACEA, manufacturer spec and not just viscosity.. And finally check service invoices for correct oils !

They one time didn't use Selenium i got various dash warnings indicating engine issues. Drained and replaced with Selenium, all good after a few runs. Learned my lesson. 2010 1.4 170bhp.

Wheel cleaner with a good amount of Hydrochloric acid. There aren’t wheels you can’t get clean with that;)

Hi tony hope your well pal, my internal temp is showing blank and my AC stopped working. Checked ac compressor and its not spinning either. Would this be due to this temp sensor? I hoping so.

Sta carriola

Show how to put the retainer back in ffs

Great recordings! Does somebody know how to take part in Apripista Car Show? Where to find the opportunity to book it.......

Where is the auxiliar battery?

Thank you so much its been bothering me for weeks 😅

Hello, excellent video! Out of interest did you experience poor ride quality with this issue.

And yet again. Thanks a lot for these video's.

How much watts are giulietta speakers what should i upgrade them with?

Nice video mate my corsa d knocking also

hi.... not sure if you will read this but if you, I would like if you suggest something!! is it ok to mix coolants when topping off or drain completely every time? I do not remember which one i put it in last time. (it is red in colour though! )will any G30 be ok or should I drain it completely first just to be safe?

Hi did your car lower and raise with this fault i have this message come up today and the rear raises fine but the front takes ages also the message is intermittent like you said.

Thank you for the help .

Hi, are these bulbs h3?

Hi Tony, great work there. I follow your channel and i must say it helps quite a lot😊 Now i have a squeaking noise in my QV coming from the rear suspension (left side) I don't have the factory shock and springs. I have the set from Novitec and it it only one and half years old, so still in pretty good shape...but the garage that did the job didnt put new top mounts on the rear as they said the ones that i brought were not compatible so tjey had to put the old ones that they said they were in pretty good condition. Is just that i can hear this squeaking noise ennd maybe a minimal "tak" noise that is driving me crazy. The right side is completely silent. The drop links were also put new at the time together with the shocks. Do you have any ideas what i can start checking? Thank you 🙏