Hi Andreas, bin auf dein Video gestoßen bei der Suche nach Videos zum Asamodo Brasa Grill. Wenn du damit auf argentinisch (langsam) grillen willst, dann schau dir mal die Videos "Maestro del asado temporada 1" an. Mit dem Untertitel Translator solltest du da weit kommen. Gruß und frohes grillen
@stengulator8 сағат бұрын
Vielen Dank, Werd ich auf jeden Fall mal reinschauen.
@312j-whoАй бұрын
Great for getting in and out of the choppa!
@stengulatorАй бұрын
i trie to pronounce with as little accent as possible…. 🤪 like and subscribe 😎
@312j-whoАй бұрын
@@stengulator keep the accent sounds cool.
@ericfuller6326Ай бұрын
It stretched
@stengulatorАй бұрын
Thats what i meant, ☺️
@ann-kathrin9562Ай бұрын
Your welcome.
@ann-kathrin9562Ай бұрын
Very good Video. I love this video! LG Anton
@stengulatorАй бұрын
Thanks you very much! LG Uncle Andy.
@Konstantin0377Ай бұрын
The problem is in the chain and the web, it is clearly visible that the chain is clamped in the wood!!! Just change them, and Dewalt will cut faster
@stengulatorАй бұрын
That is right, but only to the end of the cut, and the log would have clamped any Chain. ( IT was a crooked Not straight grown log) Like and Subscribe!
@Mr_ChucklesАй бұрын
Hi, perhaps you can help me? What is the inner dimension of the flat part before the sloping bit? I'm hoping to fit something in that is approx. 600mm wide by 250mm tall, ideally flat on the bottom
@stengulatorАй бұрын
I'll Check when i am Back in Work... Are you subscribed?
@stengulatorАй бұрын
The Box is 66 x 44,5 cm 32h
@Mr_ChucklesАй бұрын
@@stengulator Thanks, it would prob have worked but I ended up going for a case which is usually used for photography studio equipment ;) Gave you a like and sub!
@josephdellinger42772 ай бұрын
❤ I gotta try that for sure!
@stengulator2 ай бұрын
Sice the Wade muscle ist very tough meat, the quality and age is essencial.
@fabiangilch25502 ай бұрын
Mach weiter so Andy :)
@stengulator2 ай бұрын
Danke Fabi,😃
@stengulator2 ай бұрын
Like and subscribe!
@Hellm00d2 ай бұрын
Brouuudaa 😂
@stengulator2 ай бұрын
😅 so schnell schaust niad, Like and subscribe und wmh!
@p3nc1l72 ай бұрын
sauber Stengl nimm den puschl als als köder 🙂
@stengulator2 ай бұрын
Live biss Akustik 😅
@josephdellinger42772 ай бұрын
Zehr kool!
@stengulator2 ай бұрын
Danke mein Freund!
@barrydevlin69523 ай бұрын
Is there a insert you can buy for the tool chest for putting hand tools in etc like most tool boxes
@stengulator3 ай бұрын
I don‘t think so. Like and Subscribe.
@stengulatorАй бұрын
I checked and the crate has som mounting brackets for deviders Inside !
@brimstone2603 ай бұрын
Turned the vid off before you got it out of the box sorry.
@stengulator3 ай бұрын
But took the time to comment 🤣
@brimstone2603 ай бұрын
@@stengulator and reply!
@stengulator3 ай бұрын
@@brimstone260 Like and Subscribe!
@brimstone2603 ай бұрын
@@stengulator ok will do cheeky.
@jeh9663 ай бұрын
Wenn die zwei Jahre halten bin ich schon zufrieden
@stengulator3 ай бұрын
sollte kein Problem sein !
@JohnFDoe-on6gy3 ай бұрын
Haberdere, jawoll!
@stengulator3 ай бұрын
habedere, subscribe!
@eliasrodriguezgarcia7063 ай бұрын
What is the model?
@stengulator3 ай бұрын
DWST17871-1 Like and Subscribe 😁
@mega-hb4re3 ай бұрын
That thing is sexy
@stengulator3 ай бұрын
yes, i like the minigun type handle the best…😂
@keithbrasier21823 ай бұрын
This says 54v but can you put a 18v battery 🔋 in this and it will still fire 🔥 up and work perfectly 👌????????
@stengulator3 ай бұрын
No IT wont
@kenthompson37304 ай бұрын
Your audio volume is really poor. Can’t hear you very well.
@stengulator4 ай бұрын
I will buy a Røde clipon Microphone at 500 subs.
@stengulatorАй бұрын
I upgraded my Gear lately, Microphone and Camera, hopefully you will continue watching my content. Like and Subscribe
@kenthompson37304 ай бұрын
Took you two freaking minutes to just open the box! Freaking ridiculous. Unboxings are a colossal waste of time. People want to see the saw in action, not sit through a whole video of a poor attempt just to open the box. Your videography is third rate. You jump around like a child on a sugar high. You can’t stay in focus. And you’re never zoomed in or out correctly. It’s an embarrassment when there are dozens of great videos available for this saw.
@failranch95424 ай бұрын
I hope they put a good oil pump in that one. It was pretty awful on the redesigned 16 inch saw.
@stengulator4 ай бұрын
So far no Problems!
@reneuriartejr57645 ай бұрын
OK sounds good thanks merry Christmas from salt river Arizona
@stengulator5 ай бұрын
DWST17871-1
@reneuriartejr57645 ай бұрын
What's the part number or model number, and price
@stengulator5 ай бұрын
It was arround 160€ on amazon, ill look up the ModNr. tomorrow whwn im back in the shop, merry christmas from Bavaria, like and subscribe 😁
@vikkijakhamate45265 ай бұрын
Price kya he
@stengulator5 ай бұрын
Cant remember arround 400 To 500 Euro i guess
@stengulator5 ай бұрын
I bought it on amazon for 199€
@sofiparvaiz2115 ай бұрын
price is producte
@stengulator5 ай бұрын
i think you want to know what the set costs? right?
@danidee24386 ай бұрын
Die G core is keine schlechte schnur für meinen geschmack aber nicht so abriebfest wie eine j braid, dafür aber deutlich leiser in den ringen.
@stengulator6 ай бұрын
Ich hab die J Brand grand auf meiner Go To Spinnrute und mag sie sehr, kam mir aber auch immer Recht unruhig beim einholen vor aber bei Hängern biegt sie die Haken auf... wollte aber einfach Mal experimentieren...
@danidee24386 ай бұрын
ich fisch fast nur noch J braid ,alternativen zu der schnur wären mMn Schnüre von Momoi (Ryujin) oder Shimano (Kairiki)@@stengulator
@danidee24386 ай бұрын
Wow ne W8 !!! Mach da bitte ein video wie sie sich im Einsatz macht
@stengulator6 ай бұрын
Da müsstes du mir Mal Kameratechnisch und als zweite Meinung helfen!
@danidee24386 ай бұрын
kein thema@@stengulator
@davidhusung14356 ай бұрын
Danke 😬Glück Auf ⚒️🇩🇪🇩🇪
@stengulator6 ай бұрын
Geiler Zander
@samwise54937 ай бұрын
Looks like your having fun
@stengulator7 ай бұрын
Yep, i caught a Döbel ( chub) with this little settup the Same day, and was surprised how well it behaved.
@danidee24388 ай бұрын
Denk dran wenn du den shad am spinnerbait anköderst dann häng ihn upside down an 😉
@stengulator3 ай бұрын
Jup
@alan-dr8uo9 ай бұрын
Does it leak bar oil
@stengulator9 ай бұрын
Just a little, when Its warm in the Summer the saw leaks more bcz. the oil is thinner ( almost Like any other Gas saw)
@lyrics17169 ай бұрын
how much
@stengulator9 ай бұрын
Cant remember, i ordered IT before IT came Out from a DeWalt Dealer.
@todoazul10010 ай бұрын
Where to buy?
@stengulator10 ай бұрын
I bought mine in Germany ( Hall of Flames in Weiden)
@peterberndt454511 ай бұрын
Hallo Herr Stengl, nur mal eine kurze Frage: ist der Grill gut und solide verarbeitet oder mehr ein Design Grill zum anschauen? ( Ich habe schon mal schlechte Erfahrungen mit einem teuren Holzkohlegrill gemacht ). Danke im voraus!
@stengulator11 ай бұрын
Hallo, der Grill ist aus ca. 5mm Stahlblech und somit nicht zu vergleichen mit "Baumarktgrills" Sondern für die Ewigkeit.
@peterberndt454511 ай бұрын
@@stengulator Vielen Dank, es war aber kein Grill aus dem Baumarkt. Everdure Hub 2 für knapp 2000€.
@stengulator11 ай бұрын
vielleicht mach ich beim nächsten grillen nochnal ein video um speziell auf die Langlebigkeit einzugehen, bitte abonieren und liken 😁
@asamodogrills8 ай бұрын
@@stengulator das fänden wir sehr sehr cool!!
@stengulator8 ай бұрын
@@asamodogrills Na da muss ich mir große Mühe geben, wenn das alles von hochoffizieller Seite beobachtet wird... Vorschläge was ich zubereiten soll bitte an mich.
@rogerjamespaul552811 ай бұрын
Torque is advertised at 4 hp but requires a 15 amp battery to achieve 4 hp. False advertising. The chain is low profile to lower drag but less cutting time. I am sending mine back on monday for a refund, lucky I have not used it.
@stengulator11 ай бұрын
i love mine! reliable easy and clean.
@hr.457611 ай бұрын
So if I can only use it with the 9ah(3) flexvolt battery.... It is better to buy the 18" model???
@stengulator11 ай бұрын
@@hr.4576 No buy the 20 Inch, ITS way more fun! I also use 9 ah flexvolt and 12 ah ( and could Not Tell a Difference in Performance)
@rogerjamespaul552811 ай бұрын
I got my refund.
@rogerjamespaul552811 ай бұрын
@@hr.4576 It can be used with almost any amp size battery, but 9 amp will give 4hp.
@hans9253 Жыл бұрын
That's a cool setup!
@stengulator Жыл бұрын
thank you
@EasyMoneyCrew Жыл бұрын
do you have a link to the bar and chain you had on it?
@stengulator Жыл бұрын
Hi, i bought it from a german retailer called "Sägeketten Spezialversand"
@stengulator Жыл бұрын
The Chain is a regular 3/8 1,5mm 84 Oregon i think
@philipdove1705 Жыл бұрын
When will Milwaukee make one hopefully it gets full throttle under a second when they do
@stengulator Жыл бұрын
why do you think this would be critical or neccessary?
@philipdove1705 Жыл бұрын
@@stengulator I tried the ego platform chainsaw and I have to wait for the chain to build up speed before cutting. And the delay is longer than the Milwaukee one I use.
@stengulator Жыл бұрын
I think the DeWalt is very quick in acceleration, didnt even notice any Kind of delay, in the unpacking Video you can See me Rev IT up
@philipdove1705 Жыл бұрын
Can you cut half a cord on a 15 amp battery?
@stengulator Жыл бұрын
i think with a sharp chain you can get a half cord with 12 amp/h
@IndianaDoug Жыл бұрын
Good stuff. There are some great advantages to this machine over a 2 stroke chainsaw, but I believe there are several ways this machine can be improved as well. The bar(blade) and chain can use an upgrade for starters. The ergonomics are very awkward as well, compared to a modern 2 stroke 50cc chainsaw. And lastly, the biggest downfall in DC powered chainsaws is the “forgiveness” when cutting wood, in particular, trimmer applications. Let be honest, a user cuts wood in a completely different way between DC motor saws and gas powered chainsaws. The instant torque and instant stopping with these motors makes these machines less productive . This is my experience. Thanks for the efforts, I enjoy your channel👍🏻👍🏻👍🏻
@stengulator Жыл бұрын
The complete lack of an idle and the Push down safety Button is Strange, but only in the beginning, If the saw would use a full chissel Chain IT would even be faster, so i think the coming generations of BatteryElectricSaws BES( i Made the Term Up 😆) could surpass Gas Saws. In the torqe Test i really had to Push hard to Stall it.
@IndianaDoug Жыл бұрын
I love this guy👍🏻👍🏻👍🏻
@stengulator Жыл бұрын
thank you very much, a honor to have you subscribed! And your Expertise is allways Welcome!
@jagdishchand1453 Жыл бұрын
It's price in Indian Rupees
@stengulator Жыл бұрын
You have to Look that Up yourself
@jagdishchand1453 Жыл бұрын
It's price in Indian rupees
@stengulator Жыл бұрын
I don't know what you mean.
@charlies_world5733 Жыл бұрын
That is a practice casting plug. You put it on the end of your line (without a lure) to practice your casting. You don't fish with it. Happy fishing!
@stengulator Жыл бұрын
Thank you very much!
@stengulator Жыл бұрын
Hi, I used it many many times since i have it ( heavy demolition) I can say that the Hammer us as strong as a cable machine, there is no Difference im performance, I think i payed arrond 1K €. please consider to like my Videos and subscribe to my channel.
@BSSamalfmatalfrhat Жыл бұрын
اخي انا شاهدته هو قوي وفعال كم ثمنه
@stengulator Жыл бұрын
Hello , i have to say that the Batterypowered Hammer is a absolute staple in our Arsenal of Tools now, i higly recomend it especially when you work on sites where electricity is not available (obviously 😁) It puts out the same Power as a Plug in Machine from same Size. Which is just fantastic!
@kadirnejla36509 ай бұрын
Bir batarya ile kullanım süresi kaç dakika
@stengulator9 ай бұрын
Hi, i use 9ah and 12AH Batteries, and the Maschine ist Always in full Power setting, i wouls say at least 15 to 20 minutes. (Full Power- non Stop Hammering)
@kadirnejla36509 ай бұрын
@@stengulator Teşekurederim 20 dakika. Çok az bir süre yetersiz Olacaktır
@mattseymour8637 Жыл бұрын
Is this saw made in China or somewhere like USA?
@stengulator Жыл бұрын
Hi, i think its made in china with global parts, but i will check that...
@mattseymour8637 Жыл бұрын
@@stengulator That's ashame as I try not to get china made stuff. But I guess most stuff is made in China now.
@stengulator Жыл бұрын
@@mattseymour8637 i am in Germany (as you may hear fromm my stupid accent) and Back in the 80 and 90 all Tools we used where mostly made in Germany or Italy... Nowdays thats rarely the Case...
@mattseymour8637 Жыл бұрын
@@stengulator Yes that is true and that's why I do like Stihl and tend to buy more Stihl plus they are one of the best. But as you say tools and equipment that are made in China are getting better and not as 'cheap' quality as they used to be. I do have some Chinese made tools and they seem to be quite reliable.
@mattseymour8637 Жыл бұрын
@@stengulator Do you find this DeWalt chainsaw reliable and is the build quality good?
@user-ip7pk3sh9u Жыл бұрын
Do you know if this saw has variable speed, or only one speed which is max. It looks like when you pressed trigger saw was doing max RPM. So If you press trigger lightly, will it run slowly?