Ty got a buddy who might need this

I'm having the same problem do you have to take off the manifold gasket

I just bought some this year at the fishing show. They have some amazing live action motion with it. Great lure🤙🏻

Good information to know. I’ve an 02 Durango with the same engine. Really appreciate it.

Helped me a bunch

Thank u for this, man that was a pain in the ass but I did the same thing and finally ripped that thing out.

I would remove and replace the oil filter while you are at it, You will have a Little more room to work in.

Because he is trying to steal the truck

The same truck and it happened to me except for the coil pack in the back broke. And as you know you cannot get a drill back there

I have a 2004 Dodge Durango and I installed the ignition switch but my security light is still not letting it crank

242000 miles on my 02 Durango! Still runs strong

Good video bro I got a 4.7 in a Dodge ram 1500 and what was causing the wire to be skint in the first place

this just happen to me lol im hopping this works bc i put so much time into this truck lol thank you for the video man!

A one and one sixteen socket will also work if you don't have the 27 mm socket

Is there a way to disconnect the sensor to stop the annoying chime?

Thanks for sharing!

thank you for this video

Do I need to program new key switch before installation?

Thank you for the video. But I got the same thing. But I had a issue with the socket wouldn't fit. So I had to take off the cover and it fit right over it

Did you ever fish with rhem

very, good at explaining and showing as much as possible. thank you

Literally this happened to me earlier today, I was banging my head trying to figure out what to do about it. I'm about to try this out, thanks man

its an i6

if u dont want the truck starting or anything else disconnect battery for ab 5-10min then begin taking it off

Put some crazy glue on the tip /end of the key handle stick it back in the ignition wait til it dries and the whole key will come out..done this before it worked for me....

Hello, what is the product number?

Good video! thanks. My 2006 durango's light just came on last week. It's a work in progress, always fixing something... I have a 2003 durango that has been much more reliable!

Where is the fuse located?

This happened to me just now thanks for the vid bro I was tripping balls lol

Did the straps hold the yak in place?

Need to torque to correct specs

Hey by chance when this issue happened did the check gage light come on and oil pressure drop when the brakes were applied? Then all return to normal when driving? So on so forth? My 4.7 ram is having that issue and I’m winding if it’d also this

Don't do this at all you are asking for trouble.

why not glue the old key inside the cover?

Thank you!

The reason you had to use a pipe wrench is because the key must be turned to the acc position before you depress the depressed plastic button on the side of the cylinder. If the key wont turn to this position use a hammer to bash a screwdriver into the keyhole and then turn the ignition to the acc position. Hope this helps.

im here because i want to know about that black square thing that is attach to the ignition key that you said for the car's alarm. do you think that square card or box got something to do with the keyless entry fob? i have 3 keyless entry remote and all stopped working at the same time. im thinking it is that receiver that is attach to your ignition. my car is 2003 dodge durango SLT

Not to complain.. useful video. One. not trying to smart ass but that's a inline 6, where Chevrolet refers to as L series 6. Two. Unlucky me has to do hole 6... Three. I got multiple oil leaks in valve cover above spark plugs. Four. Advise? Q. Would it be easier to remove intake manifold and valve cover to gain acsess to tap hole six. Then I guess advantage would be to reseal while I'm there.

Awesome!

I was having a problem where my oil gauge would go to zero when I would stop at a stop light after running it for a little bit. I install the new one of these,Which fix the problem although once I installed it occasionally whenever I started the truck it would read low oil pressure.So I would turn off the ignition and restart it which would cause it to go back to normal.wonder why it does this....???any ideas?

had my durango broken into and got the ignition jabbed to hell with a screw driver... luckily the immobilizer which is that card looking thing above the ignition kept the thieves from going anywhere... gonna have a hell of a time fixing it

Just moved to Dallas, thinking to buy this for some hours on the lake water. Sort of wavy but not anything crazy that I’ve seen. Probably 3-6 read a book and relax on the weekends. This would be good for that right ?

Does your key have a chip because i lost my keys and dont know what to do

Where did you get your ignition and keys at please let me know something

No disrespect brother, but take better care of your tools.....................LMAO................No worries bro, just give'n you $#!T. Thanks for the video. Be safe

It's a 1 1/6 right? And what fan belt isn't this? On the back side of the engine that's where mine is.

thank you ! started having same issue this week. yours is only vid I found for the 4.7 liter. it worked.

You bought a baitcaster rod for your spinning reels:)

Great video bro! Im going to share it now

Good spot been going there for awhile just got waders a few months back..last week reds all around me caught a few but only 1 keeper and to Nice drum