What about the camshaft bolt? I would be worried bout it floating in the case.
@SethsBudgetBuilds14 күн бұрын
@jamiewilliams3154 I found it thankfully. I forgot to add that part lol.
@santinimasterfades835917 күн бұрын
Hi
@terceldude20 күн бұрын
You could send your crank to Flatlander Racing to do a Bore & Stroke Increase just bring the block also
@SethsBudgetBuilds20 күн бұрын
@terceldude if I didn't already rebuild the bottom end I'd think about it
@jewllake21 күн бұрын
I love S-10's!
@2010WRXLimited21 күн бұрын
Why swap the 4A in there? Just curious. I had one of those wagons back in the day. It was great!
@SethsBudgetBuilds21 күн бұрын
@2010WRXLimited cause they have more power over the 4a and it's a direct swap
@WaffleDaGreatest21 күн бұрын
I love the sound chop is the best
@SethsBudgetBuilds21 күн бұрын
@@WaffleDaGreatest yeah it's pretty awesome. I never knew a 4 cylinder could sound so cool lol
@racer25s21 күн бұрын
Its got pretty good chop!
@justininterrupted22 күн бұрын
700th sub lol
@SethsBudgetBuilds22 күн бұрын
Heck yeah I'm big time now 🤣 me and my quality videos lol
@BeardedWrencher22 күн бұрын
As soon as you pulled the distributor out i was like "whelp, 3 times to get that right" It's so annoying how difficult those distrubors are to get going. Great video man! That chop sounds absolutely wild! I can't wait to get mine in the rally tercel. That JDM wheel looks great in there! Also, speaking of distributors. It took me a few tries to get it right on spud 2 when i did the distributor seal.
@SethsBudgetBuilds22 күн бұрын
Dude it's so annoying I lined up the pin it popped right it but was wrong I checked the belt it was dead on after checking the distributor a second time popping it back it I just pulled it out randomly and moved it ahead a tooth and boom fixed. I'm like whyyyyyyyyyy don't they ever work when everything's lined up perfectly lol
@SethsBudgetBuilds22 күн бұрын
And yes I love the JDM wheel it's so mint. It's like the best upgrade to the car probably cause I've wanted one so long. Thanks for snagging an extra for me
@lamboferruccio22 күн бұрын
Cool upgrade, the reason the tappets were so out is because the base circle of the cam has been reduced due to it being a re-grind, I do believe the cam has to break in though, zinc based mineral oil, 2500revs for 20 minutes right after first startup to avoid the lobes from glazing over, then drop the oil, then a fresh oil change, recheck the tappets again, then check the jetting of that carb after all that is done.
@oshitt122 күн бұрын
sounds great 👍
@offici4llyg4pp3d24 күн бұрын
Will it work for my 3e 1988 coupe tercel?
@SethsBudgetBuilds23 күн бұрын
Not the one I purchased no. Check their web site maybe they make one for the next gen engine
@2568CHEVY24 күн бұрын
No longer rescue tercel - now known as Choppa
@71buickdriver24 күн бұрын
Awesome to see new content Brother!!!! Any newer content on the K5 or s10? Tercel idle is killer!!
@SethsBudgetBuilds24 күн бұрын
Sadly k5 is gone. The 93 blazers been doing good so I haven't had to work on it lol. I'm not sure what else I wanna do to it. I'm debating swapping to the dual piston front calipers and rear disc brakes from the round bodies one day but probably not till next year since the brakes are basically new
@SevenFortyMotorsports24 күн бұрын
Its awesome lol focus on tuning and exhaust now. a nice strait-though style muffler for max flow could help a little, cat delete if any.
@SethsBudgetBuilds24 күн бұрын
Cats already gone and it's got a straight threw muffler
@shtfvan808424 күн бұрын
Wow if i can ever get my 3ac running, im next! That sounds mean!
@SethsBudgetBuilds24 күн бұрын
Haha I know 🤣. I jokingly said if it chopped it would be awesome but dang man she CHOPS!!
@neverbored_s10_addict24 күн бұрын
Easiest cam swap i ever seen
@SethsBudgetBuilds24 күн бұрын
Ha yeah they are super easy haha. Now if I could just get the distributor in right the first time that would be great haha
@shtfvan808424 күн бұрын
I just posted a short video on my page, can you look at it and tell me what you think, based off of our convo a few days ago
@shtfvan808428 күн бұрын
Took off carb, took off all 10 bolts.. wont budge when trying to take head out. what am i missing?
@SethsBudgetBuilds28 күн бұрын
If yours is all still stock I'm pretty sure they have a weird triangle shaped bricked under the manifold that's gotta come off and don't forget your 2 exhaust buts that hold the exhaust to the manifold on the passenger side
@shtfvan808428 күн бұрын
Just did all that, still got nothing. Stumped@@SethsBudgetBuilds
@shtfvan808428 күн бұрын
@@SethsBudgetBuilds those exhaust bolts if the right ones, snapped
@SethsBudgetBuilds28 күн бұрын
@shtfvan8084 it happens. Heat the hell out of the stud and remove it and just use a bolt
@shtfvan808428 күн бұрын
@@SethsBudgetBuilds can i send you a pic to make sure im dling the right thing and the right bolts
@KnuckleHeadGarage27Ай бұрын
Heck yeah I love those wheels that came on the 4×4 blazers and pickups those was the best styles . The others they had for 4×4 I never liked just didn't match but these sure do I'd like to get a way to put a set on my pickup just because that's much i like them and have it sit a little higher up but they are way to wide for a 2wd to fit the front unless i had spacers but even then idk not a fan of spacers
@SethsBudgetBuilds23 күн бұрын
Yeah spacer are ok if you make sure you get hub centric ones so your wheel has a hub to set on at the spacer as well. But any more than 1 inch I don't like to run.
@user-qc5lb1zc3uАй бұрын
Distribuidor 3á from honduras 💸💸
@reynacastro9252Ай бұрын
is available or sold
@NoGoodNoodleАй бұрын
I'll just finish my coffee and then let’s go! Thank you for the video!
@MrGoofymike30Ай бұрын
What a sweet ride
@SethsBudgetBuildsАй бұрын
Thanks
@justpassingthrough3166Ай бұрын
i have a stage 2 cam in my tb with delete. when you had it tuned does your truck kind of hiccup? Like in stop and go traffic did you tune it yourself?
@SethsBudgetBuildsАй бұрын
No mine doesn't do that in traffic at all it acts completely normal and no my brother tuned it cause he has HP tuners
@thedobermangang35032 ай бұрын
My brother your music is putting me to sleep
@SethsBudgetBuilds2 ай бұрын
Haha my bad
@mtranchmike81542 ай бұрын
It's been a year. How Is this thing doing?
@SethsBudgetBuilds2 ай бұрын
Heck it's been almost 2 years. And doing good. It's made a pretty good daily driver. I don't drive far to work but I think it's got 10,000 miles on it so far since this video
@mtranchmike81542 ай бұрын
@SethsBudgetBuilds I can't remember it's been awhile. Is this the one you did the engine in? I've been a subscriber for a while. I subscribed when you were doing the k5 floor
@SethsBudgetBuilds2 ай бұрын
@mtranchmike8154 yeah I had to replace the bottom end in it
@delayeddeyhaus77203 ай бұрын
Damn i didn’t know they worked that good lol. I was gonna get a air locker for my 22 ram but I’ll just get this. Way cheaper
@SethsBudgetBuilds3 ай бұрын
Yeah the air locker would be nice if you like hard core off roaded and needed it to just stay locked no matter what at your control but for every day use and some wheeling I like this diff
@Cometaam273 ай бұрын
My babies sputtering won't stay on
@markthomas67703 ай бұрын
That's Quality imaging 🤣🤣🤣
@SethsBudgetBuilds3 ай бұрын
I'm definitely no pro.
@mtranchmike81543 ай бұрын
I just got a s10 blazer 1988. I sold my k5 and was looking for something different. It's only the 2.8 but that's fine. It's still "MINT"
@SethsBudgetBuilds3 ай бұрын
I just sold my 88
@saiyandemon82363 ай бұрын
“Wait for Vtec”
@Irshmere3 ай бұрын
did you go with a 26 or 28 spline Eaton? I have a Luv truck with V8 swap and S10 rear, but not sure how to find out the model year of the S10 rear. With the 10 bolt 7.5 , I am seeing both 26 and 28 spline. Excellent video!
@SethsBudgetBuilds3 ай бұрын
More than sure it was the 28 spline. But if your unsure pull an axle out and count the splines on it to be sure
@brenyz50133 ай бұрын
They look sweet !!!
@SethsBudgetBuilds3 ай бұрын
Yeah I actually prefer the clear look over the normal lights
@KnuckleHeadGarage273 ай бұрын
Hell yeah , I need another c10 now thanks 😂
@SethsBudgetBuilds3 ай бұрын
Get the check book out haha
@Matts05jeeprubicon3 ай бұрын
I put a truetrac in the back on my 99 blazer. I love it. It's been a real upgrade over the stock g80.
@SethsBudgetBuilds3 ай бұрын
Yeah the stock g80 takes forever to lock in and they always break lol. And I hate after like 20mph they auto unlock no matter what
@juandasilva92263 ай бұрын
Amazing that save this Blazer. I own a 94´4x4 Blazer with manual transmission. The mine had the digital dash. Congrats from Venezuela, Caracas
@bobberbuilder61223 ай бұрын
Whats the cam specs
@futuresight26934 ай бұрын
Solid video.
@ronniefoster21124 ай бұрын
Glad you guys are here. Thanks
@nomusicrc4 ай бұрын
I collected for the five Hummers radio shack sold and now for whatever reason I'm trying to collect all the dual motor radio shack vehicles I have the black phantom and the tempest I just need to buy the F-150 and the road phantom and I think there's one more forgot the name
@operatingengineer4 ай бұрын
nice truck man!
@SethsBudgetBuilds4 ай бұрын
Thank you 💪
@devingoeff16864 ай бұрын
That’s definitely a Chevy
@SethsBudgetBuilds4 ай бұрын
Actual its not. it's just got a Chevy grill in it.
@ChristCostanza4 ай бұрын
Great video! Thank you! Did you guys figure out why the front sat at the same height?
@SethsBudgetBuilds4 ай бұрын
I'm thinking it's the swap bar tension. It needs longer links cause disconnected its taller
@terceldude4 ай бұрын
Love that Tractor sound 😂😂😂😂😂😂
@SethsBudgetBuilds4 ай бұрын
Haha yeah it was pretty funny
@santinimasterfades83594 ай бұрын
Hi I need the splasgard
@SethsBudgetBuilds4 ай бұрын
The what ?
@Chrissurf4 ай бұрын
I slammed 1.5"iift and 235 65 r16s on mine....
@Jaggi964 ай бұрын
Do you have a video of it? Interested to see what it looks like.
@Chrissurf4 ай бұрын
I will do a video on it and put it on my KZfaq channel I'll send you a link when I figure out how to do all that
@Chrissurf4 ай бұрын
And actually they're 235 70 r16
@Jaggi964 ай бұрын
@@Chrissurf Cool! Thank you!
@Orycle420Ай бұрын
@Chrissurf I've got 225/70 on mine. The rear wheels are sooooo close to the fender in the front! Lol. Wish they made adjustable control arms!