I did everything you mentioned. My webpage has 19 pages, my whole pages run through the flow but when the flow ends i get data only for the 1st page, why so? Please please help
@marcoschavez32896 күн бұрын
Worked perfectly, and you are completely right, it isn't as easy as you could think to make a flow fail for testing; I couldn't find anything like this anywhere else, thanks!!!
@bellam24138 күн бұрын
Thank you so much! you explained all very well and I like how you broke down each function.
@dipensoni56729 күн бұрын
Thanks for creating informative video. I have a query I am following same steps. My data on web page is in tabular format. I am selecting entire table where the data is present. It previews correctly. However when I run flow it gives error Unable to fetch data fro web page. Please help me where am I incorrect.
@alvinarapoti17 күн бұрын
Excellent video, saved my work! Tip: Here there was a duplication error for columns with the same name between collections. Those who work with lists in Sharepoint may have difficulty, especially with the automatic list columns that are loaded into the collection. As a solution, I created other collections by adjusting the name of the duplicate columns and leaving only the columns that did not have the same name.
@parranoic21 күн бұрын
Hi, thank you for this video. I'm currently facing the same issue. I'm doing ClearCollect(SharepointListName, LocalCollection) and in studio the data gets retrieved properly, but when using the app normally many columns are blank. This doesn't make any sense, the only thing I do in my gallery control is to show ThisItem.ColumnName. It worked fine for 3+ months now. All I did yesterday was to clean the data and add new one. Any idea what it could be ? I'm suspecting Microsoft broke PowerApps again as for the past 2 weeks there are a lot of caching problems
@waffleghostorfrenchfry7932Ай бұрын
Why do my videos always have bad fps? when im actually recording the fps is fine but the video ends up really bad (im recording roblox btw)
@zbigniewlukowskitutorialsАй бұрын
Don't know but looks like some problems with either your computing power or OBS updates, possibly with drivers, but im not an expert in those kind of problems.
@howenvinАй бұрын
Thanks. This was clear and helpful
@aducaale328Ай бұрын
Thank you sir for explaining the concept. This give the idea to export my filtered choice columns by replacing Lookup to filter, Hope it works. Thanks again.
@rebeccamayer3602Ай бұрын
Hoping someone can please help me, I have a multi tab form in powerapps and a dashboard that displays the list items created. When I select the form to edit it and make any updates and save it, it then creates a new Item instead of updating the selected item! Edit button is currently- OnSelect - EditForm(Form1); EditForm(Form2); EditForm(Form3); EditForm(Form4);Navigate(Non Fraud New’,ScreenTransition.Fade) And Submit button is - OnSelect- ‘Patch( ‘Disputes List 2.0’, Defaults(‘Disputes List 2.0’), Form1.Updates, Form2.Updates, Form3.Updates, Form4.Updates); Notify( “data submitted” Notification type.Success); I don’t know what to do I’ve tried everything 😢
@zbigniewlukowskitutorialsАй бұрын
This Function here: ‘Patch( ‘Disputes List 2.0’, Defaults(‘Disputes List 2.0’), Form1.Updates, Form2.Updates, Form3.Updates, Form4.Updates); <------ creates a new Item, instead you should just use SubmitForm(Form1);SubmitForm(Form2);SubmitForm(Form3);SubmitForm(Form4);
@rebeccamayer3602Ай бұрын
@@zbigniewlukowskitutorials when I try and use that it submits 4 different entries in Microsoft list instead of one combined entry from the 4 forms
@zbigniewlukowskitutorialsАй бұрын
@@rebeccamayer3602 Then If you really need a Patch, in 2nd argument instead of Defaults(...) if you want to just update use Lookup function and find your Record by a GuID you're using
@DarraSmith-ow8xzАй бұрын
Ok, I'm going to try again. The issue is what if the value for this field is populated when you click on a gallery that contains a lot of different values for the field. Each time you click on the SharePoint it populates the text field with the value the numeric value that was stored. However, it doesn't format it because there isn't an OnChange fired. Would love to know how to use this solution when you aren't starting out with a blank.
@DarraSmith-ow8xzАй бұрын
How do you get this to work on a value that is store in a SharePoint list. In other words, the value of the text box is populated with different values as you click on a gallery, which pulls in the Sharepoint record. The formatting only happens on a change and so setting the default to the value from the SP List (number only) you don't get the formatting.
@zbigniewlukowskitutorialsАй бұрын
Instead of UpdateContext use Patch(collection,ThisItem,{youformattedcolum: "Format you want"}). Of course you need to create collection out of SP list in the first place with proper formatting - Text(Value... etc )and update the SP list whenever you need to.
@2007pradiptaАй бұрын
this is only working when I add User to the Security Role but when add a ADD Security Group (user belongs to this group) it not working.
@Luigi11111Ай бұрын
Was looking for a solution on this specific scenario online...for hours!! You saved my night and gave me peace. THANK YOU!
@QWalesАй бұрын
Thanks a lot for this. Bonus points would be for including the text of the 2 expressions :-)
@pratikjadhav6501Ай бұрын
I did the same , during testing i am getting the form with data , but while preparing the link , i am not getting the Order value in the label
@GalaxyToddlerАй бұрын
Thank you so much!!!
@adamsmuga5313Ай бұрын
Cześć, wygląda na to że jesteś Polakiem (w końcu imię i nazwisko jak najbardziej polskie) więc po polsku będzie prościej. Na filmie pokazane jest jak otworzyć plik Mpeg4 ale co w przypadku jeszcze innych formatów takich jak np.: WMV, AVI, FLV czy innych? Poza tym będąc CAŁKOWITYM LAIKIEM W SPRAWACH OBRÓBKI DŹWIĘKU chciałem się upewnić czy mp3 dotyczy tylko plików audio? Jeżeli chodzi o obróbkę dźwięku to głównie chodzi o dźwięk w filmach więc audio-video ale filmy to np. wspomniany mp4 i tutaj pytanie o mp3, w Audacity można otworzyć tylko np. mp3 ale trzeba mieć odpowiednią bibliotekę, o mp4 i innych formatach nic nie jest wspominane w różnych samouczkach, jak to więc wygląda? Samo otwarcie pliku to nie wszystko, o ile wiem można nawet przekonwertować pliki innego formatu na mp3 ale ja np. chcę zachować film w formacie mp4, jak sprawa wygląda w Audacity?
@zbigniewlukowskitutorialsАй бұрын
Zachowaj jako mp4 w programie do obrobki albo uzyj konwertera, jesli chcesz pracowac na audacity, to potem w programie do obrobki filmow dodaj film, wykasuj mu dzwiek i doklej dzwiek mp3 z audacity.
@stepnow112 ай бұрын
PowerApps and Board games, my two favorite things : D
@jagadeeshreddy32392 ай бұрын
ClearCollect(CombinedCol,DropColumns(Ungroup(AddColumns(Coll1,'S_no',Filter(Result1,ID1=Value(Coll1[@ID]))),'S_no'),ID1)); hii i have 2 collections Coll1,Result1(has 2 columns ID1,Confirmation) in the CombinedCol The Confirmation column is empty. anyone please help me, its an urgent issue need to be solved
@franciscoquintero30572 ай бұрын
thanks you !!!!
@tonya33082 ай бұрын
Could we use this to then create a csv in Excel?
@Libanes13sbo2 ай бұрын
Spot on solution!
@benjaminnzioki88153 ай бұрын
It seems so many of Power Apps maker really want to a solution to this problem. This works perfectly in standalone text input control but not if the control is part of a gallery, would you be knowing how to set up this in a gallery?
@zbigniewlukowskitutorials3 ай бұрын
Hello, You'll need to use Collection instead of variable and Lookup the collection based on current row (ID or any sort of unique ID), If you have problem with this please create a post in Power Users microsoft forum, provide a link here and I or any other pro helper could assist you.
@benjaminnzioki88153 ай бұрын
@@zbigniewlukowskitutorials Thank you.
@DarraSmith-ow8xzАй бұрын
@@zbigniewlukowskitutorials I've done that and no one has been able to give a complete solution only suggestions on how to do it. This is why this is so difficult. It would be nice if you would show how this would work instead of just referring to the Power platform community where this has been discussed a lot.
@markbaker24183 ай бұрын
Hi, I tried to follow your tutorial but had no Success, I have a datacard called 'dcardSelectedUsers' with a combo box items = Choices([@'Users-DocLibApp'].Group). The SharePoint list 'Users-DocLibApp' has a column called 'Group' which is a multiple selected people column. I can see the selected users in the combo-box drop-down however, the label wont show the selected users. The fx syntax is underlined with red. When I type Value in the formula bar, the auto-complete wants to add a '(' after the word Value. What to do? Thanks
@zbigniewlukowskitutorials2 ай бұрын
The important part is what is the prompt after you hoover over the "underlined with red FX syntax".
@bra1nr0ttedx3 ай бұрын
thx - worked for me
@DarrenCarlson-zv6ec3 ай бұрын
This is exactly what I'm trying to accomplish so thank you for taking the time to create this video. I've liked and subbed. But could you help explain how to do this within a form with the Default property of the input field is Parent.Default since it's getting it from a datacard?
@zbigniewlukowskitutorials3 ай бұрын
Haven't tried it with form Parent.Default but did you? It doesnt work when instead of variable youre using just "Parent.Default"? Btw Im a great hater of all OOTB forms in Canvas, you can achieve 95% of functionalities without them and while using containers.
@DarrenCarlson-zv6ec3 ай бұрын
@@zbigniewlukowskitutorials I did try and was unsuccessful which is why I asked if you were aware of a solution. I don't disagree with the OOTB forms but if you have to patch 20 fields, it's easier for me to use SubmitForm. If you're trying to do this within a form, the solution still seems to be the label and hidden input field.
@DarraSmith-ow8xzАй бұрын
@@DarrenCarlson-zv6ec I tried to do this without a Form, but rather I have individual fields that get populated and I cannot get this solution to work. I patch every field individuallly and do not use the SubmitForm.
@ChrisPosu3 ай бұрын
Dzięki za ten trik z UpdateIf, mega się przydało mi :D
@067aryasadvilkar73 ай бұрын
Hey, what if we have a text label not inside the same data card, a different container maybe
@zbigniewlukowskitutorials3 ай бұрын
You can reference different containers or put it in variable
@jos3pph3 ай бұрын
Hi, thanks for your video. You know if it's possible to do sums or other operations and using this text format?
@zbigniewlukowskitutorials3 ай бұрын
Yeah inside text input you can use Sum(x,y) for example
@cezprieto34363 ай бұрын
What to do if next page is "Load More" and not page?
@zbigniewlukowskitutorials3 ай бұрын
YOu need an "IF" function and if "Load More" is visible then click it, scroll to the bottom of the page, check for load more, etc. And then at the end Scrap
@user-sk8so8le1s20 күн бұрын
@@zbigniewlukowskitutorials if there is no next button ,what would be action please. my web page 50 data at a time , when I scroll down, it automatically load another 50 data and so on. With extract data from web action, it only take first 50 data, how may I take next data ? Thanks for nice video
@zbigniewlukowskitutorials20 күн бұрын
@@user-sk8so8le1s There are many options, but usually you would need to scroll, and check for element which should be at the bottom.You'll need to do the scrolling before and then scrap all the data. If scroll is infinite, then its a problem... you'll need to set the rules when to stop.
@evamitsakou4 ай бұрын
Hi! What to do when the last page has less data than the rest of the pages and gives me an error?
@zbigniewlukowskitutorials3 ай бұрын
What are the details of the error -message, code etc? - its not because you have less data, but probably cant find the element, please provide more info.
@user-gx5zk8gx9x4 ай бұрын
is this Switch fungtion can use for Search text in Tabbed Galley ?
@zbigniewlukowskitutorials4 ай бұрын
no, not really, for this function create a search bar on top of your gallery (as Text Input type of control) then on gallery you can use Filter function to only show whats in the gallery. Its an example, not sure what you want to do with your search, but this is most common thing ;D
@Shark-fj2sz4 ай бұрын
stupid stupid stupid error
@ScatPackJack4 ай бұрын
Great video, Only person I found online who explained what Entity1RelatedTable was actually looking for and showed the syntax. Thank you
@zbigniewlukowskitutorials4 ай бұрын
You're welcome :)
@benjaminnzioki88154 ай бұрын
Thanks a million for this. Also, your Do Until loop was simple to implement.
@zbigniewlukowskitutorials4 ай бұрын
Happy to help, have a good one :)
@smac7714 ай бұрын
Is it also works with editor ?
@zbigniewlukowskitutorials4 ай бұрын
Hmm didin't try, but it will take you 30sec. to check if you can place another atribute in editiors link (I think no, but tell me if otherwise)
@chrischris7114 ай бұрын
Hi Thanks for this video ! I kept triggering errors on PowerApps. I put the code in ChatGPT and it told me there was a minor error by including the alias. ChatGPT suggested to write the code like this and it worked: //Join 2 collection together **Inner Join ClearCollect( colQuantitywithNames, DropColumns( Filter( Ungroup( AddColumns( colOrders, "tempRecordHolder", Filter( colBoardGames, ID = BoardGameID ) ), "tempRecordHolder" ), !IsBlank(ThisRecord.ID) ), "ID" ) ) Thank you again this video was very helpful; I am using a collection from SQL to create drop downs but I have NULLs in my table. This will help create a collection where I am not including the NULL values. Thanks !!!!
@pavannalamala77234 ай бұрын
this is for only one control what if we use textinput control inside a gallery and on change if we write it displays for all records as the variable set to default
@zbigniewlukowskitutorials4 ай бұрын
Hey I believe if you have gallery, you use some kind of collection for it, so you can add additional column and change it and control a line in the same manner as having variable. Consideration: I dont know about performance of this solution ;D
@halimahabfatar39844 ай бұрын
Thank you for the sharing. However, I want to ask if I am doing it in the form and have tried to submit the form. But when using the new form, the formatted data is not reset even though I have using the NewForm and ResetForm function. Can I know why?
@zbigniewlukowskitutorials4 ай бұрын
This would be impossible to know just from the description, but you have a tool to help you, please use "monitor" and when you pushing the button check what happen in the request which is outgoing, it probably fails and you can see the error code/ message in the tool
@user-wy9ow9yg3m4 ай бұрын
Hi bro, thanks for this good content. I am also facing the same issue
@zbigniewlukowskitutorials4 ай бұрын
can you describe your issue?
@OpusMagnoCards4 ай бұрын
Thanks, super helpful!
@zbigniewlukowskitutorials4 ай бұрын
You're welcome m8
@jm302music5 ай бұрын
Man, thank you so much for making this video! I would never have been able to figure out this complex path to finding and eliminating the dependency for the column I needed to delete!
@zbigniewlukowskitutorials5 ай бұрын
Glad I could help you man :)
@cztop545 ай бұрын
Was excited to try this but I'm getting an error where it says "Enter a valid boolean" and it will not let me save. Just thought you should know. Thanks
@zbigniewlukowskitutorials5 ай бұрын
hello, you're on the new designer, right? It has the safety check I'm afraid. But! Worry not! Try to create a variable of type Boolean and in value try to use the "Custom code" option then go to FX and use function utcnow(), you should fail successfully, cheers
@veerleswartebroekx68165 ай бұрын
My flow was part of the solution, but lately there seems to be something weird going on when objects are both in the solution and not in the solution. Thanks to your tip I removed flow from solution and re-added and that fixed it. Thanks!
@zbigniewlukowskitutorials5 ай бұрын
glad I could help you, good luck with your flows :)
@GusOfSparta5 ай бұрын
thank you my friend. I didn't know what to do here and this helped me a lot.
@zbigniewlukowskitutorials5 ай бұрын
glad it helped, anytime :)
@rodfmess5 ай бұрын
Super helpful 🙂. One question, though: what if the default property of the text input is a lookup?
@zbigniewlukowskitutorials5 ай бұрын
Hey I don't see any additional obstacles between lookup and variable, but if you use it for lookuping the dynamic context on the same screen, an additional refresh or variable may be needed (depending on the situation)
@bhumikavijayakumar35516 ай бұрын
What if we have a integer instead of null, will it be the same?
@zbigniewlukowskitutorials6 ай бұрын
Do you mean the error "Invalid type, expected .... but got integer"? Yeah basically the same concept applies, you need to add them to the table of possible formats IFFFFFF they are truly expected
@user-lh7vk2ix3c6 ай бұрын
Hi Zbigniew, may I know how you make the mouse click on page 2 at first and automatically move to page 3 and so on, cause I only able to move 1 step (from page 1 to page 2) and it is stop moving and keep extract the data from page 2 after that......
@zbigniewlukowskitutorials6 ай бұрын
You have an error in Selector, look at 8:23, you need to have a recognizable selector, in my case I had numbers 1,2,3,4, etc, Idk what is your case, if you have numbers you need to iterate through them in a loop by selecting next button and adding +1 to variable in each loop, but to do this you need a selector with recognizable buttons if you don't, then write to your developer.