Sorry, don't think so. They will only work on the mighty plug pro. If you want you can try using Mightier Amp to import the patches you want to reuse, check how they are composed and try and replicate same settings for the device you want. Not straightforward but it works (it was I do regularly)

@@TutoJam The thing is, I don't have a mighty plug pro, I only have a mighty 8 mk2. As far as I understand all these devices use the same processor and it is strange why custom patches are not suitable for the whole line of mighty.

@A1exBo the dsps are similar but not identical and compatibility at firmware level is a manufacturer decision. If you look at the full list of effects of each device you will find similarities but also many differences. Best option is recreating the tones manually

@@TutoJam I need a specific chop tone patch pack. Maybe you have it so I can copy its settings for mighty 20 mk2? I need John's Amps vol1 for MP-3.

@A1exBo sorry mate, I do not own that pack

Thank-you for your feedback, keep on experimenting!

Hi buddy. I am not sure I understood exactly what you mean but it may work. A doubt: when you say " with the looper the guys stays on" I fear you are on the wrong route. Can you please explain again what you are trying to do?

@@TutoJam yeah using voice to text so probably just got me on auto correct I made a preset I ain’t got no clean. I made another preset. I ain’t got no fuzz and I tried to use that while looping and it changes the prior I ain’t got no clean to fuzz when it loops I can’t do both so I just have to do one and then do the other live

@Eddyvnhln5150 have you tried setting the looper to "post" instead of "pre"?

Hi mate, not exactly, mighty air and mighty plug mp2 are compatible, mighty lite bt mk2 is newer and different. For that one you cannot use those presets right away

@@TutoJam Thank you for the answer 😄

@user-fc5my9dg7h at disposal if I can help

Thabk-you very much for your feedback my friend. This hearten me a lot, 🖐️

Too bad it seems it can only send messages in MIDI mode

@@TutoJam Thanks! The external midi controller seems to be the only solution then.

@VanMaco seems so....

Are you referring to the volume? If so, well I totally agree, luckily it is provided of a power reducer, even in 5W mode I cannot keep the volume above 50% at home if I don't want windows to blow up.

Sono fantastici ed è straordinario goderseli da mezzo metro come all'alba del rock, in fondo parliamo di artisti abituati a pubblici di decine di migliaia di persone. (They are amazing and having the possibility to stay one foot from them just like in a Birmingham pub during the seventies... It's extraordinary. Consider these guys are normally playing for 50k people or more.)

@@TutoJam esattamente!

Purtroppo lo stack audio di Android fino al 12 non era standardizzato e quindi molte implementazioni dei fabbricanti riservano delle sorprese. In qualche caso anche nelle versioni successive. Cerca magari di capire se ci sia un pattern, per esempio se colleghi il cavo prima o dopo aver aperto la app o avviato il dispositivo o qualcosa del genere

I will definitely do it my friend but please be patient for a couple of months

Yep, in the MOD block you can try the S.C.F.

Too bad you are perfectly right my friend

Currently not, it would require to leverage a cloud repository to save data. Feel free to ask Tuntori for that feature i in fixture releases. Bye my friend

@@TutoJam Thanks for your time

Hi, for mighty space (and might plug pro) using custom irs is very easy as you can import them through Mighty Editor. Personally I bought some Choptones IRs as I like their quality. I would also recommend "Roby Rocks" IRs, very professional, but if you want something free please check this article, still valid: producelikeapro.com/blog/best-guitar-impulse-responses/

@@TutoJam Thanks that's a great help

Hi, not easily, you may have seen I needed to connect to dedicate MIDI ports that are only available in a few models

It may happen if your phone cannot provide enough power. You will need to try with a powered usb hub

Thanks for your kind feedback

Thanks for your feedback

Good to know, thanks for the tip. I checked it and it is available also in Europe but the price is higher, with the HB + a vintage 30 cone you can still save 100€ but the pleasant look, detachable cable and no need to modify it may be worth the extra cash

Hi my friend, unfortunately I am not the author of this great app, I am only showing its use. If you want to support the author his name is Tuntori and you can donate on his GitHub page github.com/tuntorius/mightier_amp. If you want to support my channel you can become an affiliate but the easiest and completely inexpensive way is to share it with your friends and ask them to subscribe. I am very happy you found Mightier Amp so great, I had the same feeling and that is why I wanted to share it

Hi, it should be possible in theory, too bad when switched to MIDI mode the Valeton seems to stop many other functionalities

@@TutoJam ah that was my fear as well. Very sad if so. Wish they’d just come out with a new update that would at least let the switches be changed from release to push reaction. That and bypass the fx loop

For sure when switching scenes, not sure when switching presets, on a first thought I would say no but I will check when back from a transfer on two weeks

No it doesn't. It is muted only if you connect headphones

@@TutoJam so it will direct record both video and audio at the same time

@87RedSpecial yes indeed. Check the channel, there are two specific tutorials for that

Try setting the USB in audio in settings

Hi my friend, I do not own a gen 3 but I have a plan to do a tutorial for gen 2 that should be applicable also to gen 3. But I fear you will have to be patient for some weeks

@@TutoJam Thank you for your quick reply. The Gen 3 is different in many aspects. The tone Engine is different and The app is different as well. They also changed the USB in the back from the printer style to USB C. The Xsonic KAT worked perfectly with the MKII model but that is no longer the case. I'm pretty sure the Chocolate will do the trick but it's just knowing how to get The Chocolate to talk to the GEN3 app for IOS. I do very much appreciate your helpful videos as I have learned a lot. One last question unrelated to Katana. On the Mightier APP is there an individual Patch Volume like in the NUX Mighty APP? I don't see one but I am probably missing it?Thanks again my friend.

@soundscapematrix thanks for the clarification about the protocol for katana. About Mightier Amp app: current revision has global volume but not a per-preset general volume. You can obtain a similar result setting the amp volume but I do not remember anything block independent

@@TutoJam That individual patch volume is vital in getting a good balance. Maybe it will be implemented somewhere down the road.

@soundscapematrix well, honestly I never found that vital as I use to fine tune the effect chain every time with that purpose, personally I strongly prefer the global volume. The best option would be having both. Please forward your proposal for that feature in TUNTORI's GitHub site. github.com/tuntorius/mightier_amp

Thank-you my friend for your compliments and for sharing your happiness about this great device

Ciao. Non puoi farlo dal Tab editor, devi farlo da "Preset"

@@TutoJam ho provato Preset..scelgo Preset.....tre pallini a dx cambio canale....ok ma niente

Ma ti aspetti che si sposti nei preset memorizzati sul dispositivo? Perché non funziona così

E come funziona......ho collegato al mpp una pedaliera m-wave chocolate e per mia comodità volevo mettere nei primi 4 Preset i suoni che uso più di frequente e ad esempio il numero 7 volevo metterlo in posizione 4 (o blu) e così via.ma cosa serve allora nella sezione Preset poter cambiare i canali?grazie

@opta2000 quello che metti nella sezione preset viene memorizzato solo nell'app quindi l'app cambia i preset al volo ma non viene memorizzato nei sette preset che ci sono sulla macchina. Se vuoi spostare i preset di default prima li salvi come preset trovi nel canale altri video dove è spiegato poi ritorni nella sezione editor scegli quel preset e lo salvi sulla macchina c'è un pulsante appositamente per quello. Ci sono dei tutorial appositi nel canale purtroppo sono in inglese perché non sono mai riuscito a doppiarli se vuoi puoi seguirli se riesci con l'inglese o con i sottotitoli

Well, sorry but no. The app shows the options available in the device firmware. Mighty Air and Mighty space are different

Hi, you can see from the IRs available. The choptones version has only 18 slots for use IRs as the first two are filled by choptones ones. In any case I am not expecting a factory new device to include the choptones firmware, it if very likely you will need to update it

Thank you for the reply.

Sounds like your phone memory is not far enough for this. How about decreasing video resolution?

@@TutoJam Thank you for so kindly replaying to my message! That was a great suggestion, but unfortunately didn't work. I was afraid my MPP unity was faulty so I updated the firmware. Didn't work as well. It works fine on my Samsung S7 tablet. With my phone, it records audio from the mic just fine for any video. The issue happens when recording from the usb-c. Thanks for trying! All the best! Regards from Brazil.

You are welcome, I am sorry you could not solve. All the best!

Yep. Ampero 2 is famous for its better distorted sounds but it introduces a longer delay I don't like

It's completely true. And what you say is even more applicable to guitars. When I was young everything below 2000 bucks was pure s..t, nowadays I can find great instruments for even 100... Well, honestly speaking this amp is somehow an outsider, as I say in the video it costs less than its components alone, for this reason I felt a little ashamed when I purchased it...

Definitely. Too bad copyright strikes scare me a ton. I just uploaded some very basic samples I recorded that very morning but I did not dare to include and converted into shorts for safety. Nothing good but they give a better idea

Honestly I love it, it has everything I love in tube amps: creamy crunch, reactivity under the fingers, dynamic response, but it is also so cheap and light I am never scared to use it or to bring it anywhere. My fiancee already renamed it "Burro", the italian word for butter, due to the sound and its color

He he. 😁. I am so scared of copyright strikes my mind get blank when I have to improvise. In the channel you will find some very simple samples I recorded that morning freely but I did not dare to include. Converted them into shorts so I should be safe. Thabk-you for watching and also for your feedback

Зачем звучат струны, не участвующие в игре? Их надо приглушивать. Очень грязный звук. Есть два главных правила в игре на электрогитаре: то что должно звучать, то должно звучать, и то что звучать не должно, то звучать не должно.

I was just slapping the strings without a clue. I will cut the samples section, I understand it is too hurting

Definitely. 😂. I am a good technician and a very bad player. Consider also I got a copyright strike for replicating 3 notes. I am so worried about it I scramble everything for better safety, frustrating.

Hey William, ignore this jerk and follow your bliss!

Thank-you but he is right. In any case I just uploaded also some basic samples I made that very morning and turned into shorts for better safety

@@TutoJam You can play standard forms like 12 bar blues or use copyright-free backing tracks to minimize (potential) strikes. It is no sure thing because the algo is always changing and buggy, but at least you can effectively "load the dice" in your favor.

@shaft9000 yep. I will prepare or compose a simple sampling suite for these needs

You are welcome my friend, happy to know you found it useful

They provided all possible levels of freedom. I will double check but I seem to remember if you save the preset then the bpm is fixed for all scenes

Did you recalibrate the expression pedal? Also make sure the input meter is turned off

If you are using Mighty Amp yes. If using Mightier Amp you can import it in the app but you can also simply play it through Bluetooth to the MP plug

Thanks👌

You are welcome my friend

Too bad I cannot test it as I do not own the JR but when I tried with the regular GP-200 it was not working even if they report it as supporting MIDI through USB, I am expecting this to be due to missing USB host (a PC) in the connection. GP-200 is not working as USB host. Sorry I cannot help more than this.

Hi, I do not own it but I am expecting for it to work just like the mighty air. If you are on windows you need to download and install the ASIO drivers from the official website and after a reboot your PC should detect it as an audio card

@@TutoJam Thank you so much I hope it would work I will install it

Hi, I did not made an A/B test but I have to say I had a similar impression but cannot tell if it is suggestion due to enthusiasm