How did you move the right pulley to bring it closer? I’m using the 3m hex & it’s barely moving.
@roxyc56117 күн бұрын
Awesome never knew a laser could engrave on a blanket 😮
@kHoPhAe10 күн бұрын
Thank you! Mine was the fonts, it was always scrolling up but your fix fixed it, thanks again!
@nahnisjourney140616 күн бұрын
Tell me… three years later, has cameo made the cameo 4 pro quieter? Thank you.
@LisaPottsDesigns16 күн бұрын
Honestly, I haven't kept up with Cameos anymore. I switched over to the Siser cutters. Quiet, fast and precise. :)
@nahnisjourney140616 күн бұрын
@@LisaPottsDesigns thank you for your honesty and your response. I know it’s loud. My 4 is loud, but I prefer it over my CRICUT. I would get the Romeo if I could afford it. Again, thank you so much.
@nahnisjourney140616 күн бұрын
#REPLAY 3 years later, and I have found your channel. I’m planning to purchase the Silhouette Cameo 4 Pro on 2024 Amazon Prime Day. I already use the Silhouette Cameo 4, but it’s time for a 24 inch cutter. I also need a wide format sublimation printer. Epson preferably. I inks are much more affordable.
@joannamaebetez788616 күн бұрын
thank youuuu! such a big help!
@rachelparys245120 күн бұрын
Thank God you posted this!! I have been going nuts!!! Thank you!!!!
@mtz3843Ай бұрын
question, what wattage is the laser your using?
@thenatnatboyАй бұрын
6:53 im new to this, why you have to mask and then running over the image with the laser twice?
@debg939Ай бұрын
Would you explain padding & add edge? And, what does the Keep Original Artwork do? Thank you!
@anlinmacmillanАй бұрын
Hi, very helpful! Thank you! what is the setting for cutting these thin letters on Glow-forge for Acrylic material?
@denameeker64072 ай бұрын
Cameo 4 pro and cameo 4 plus
@toddanderson95742 ай бұрын
Great video, you make the boring stuff not so bad! Can't wait to check out more videos!
@bettysanes67772 ай бұрын
I have a question,why is my design all black
@aprilrhodes1802 ай бұрын
i got a template from etsy but Silhouette Studio says its not supported by the download, can you share the one you purchased
@InarasSerenity2 ай бұрын
Super helpful! I'd forgotten this and was getting frustrated with a project. Then - Duh! Searching is free, and there you were!
@user-dv8hs7nn2j3 ай бұрын
I'm new to glowforge. do you need to do all your designs in a different program? I use a cricut and have tons of svgs I want to use with my glowforge? any help on that?
@trishshapland59233 ай бұрын
OK, so I have had this for 2 plus years and never really worked with it. I just bought the Cricut Venture. IDK what I should do with the Cameo Pro ( Should I keep it?). The software was a tough learning curve so while I love the design store I couldn’t do it
@user-zv9is2ub7s3 ай бұрын
Beautiful!!!😍👏🏼👏🏼👏🏼👏🏼👏🏼
@beakermann3 ай бұрын
Awesome work & video.
@kimgray11273 ай бұрын
You don't need to seal over the rub n buff?
@verobeier3 ай бұрын
excellent tutorial!!! i love that file
@lindapatino0113 ай бұрын
Hi, I am engraving on the same journals with GF Pro. I recently purchased it and having issues with the image engraving where I place it. Any chance you could help? I’ve watched almost all your videos and notice that for the most part your images engrave where you place them on the image but I am having no success. 😢
@SweetMelissa804 ай бұрын
Thank you!!! This was driving me batty!
@KerryHeavens4 ай бұрын
Thank you so much! You are amazing!
@joannagutierrez12654 ай бұрын
Love the videos! Just a question how thick are the small cutting boards I am just trying to understand how much of a height from the laser head to the board we have to have in between sorry I am new to all of this.
@Bradyteach4 ай бұрын
Where did you get the Madina clean font?
@debbiegaines13624 ай бұрын
How do I make a stamp where the letters are recessed & backgound flat? Thank you!❤
@coraarloandjesscreatingstu70165 ай бұрын
Your hair is so beautiful!
@GGlovescj5 ай бұрын
Can you please 🙏 share the link for the wood . I’ve tried several types of wood and it won’t cut through
@robininaba45695 ай бұрын
Wow! Thank you Lisa, I would love to learn more about how you became proficient with the GF settings
@jibjo-a5 ай бұрын
it is what i am really looking for :) Thank you so much
@proudcanadianeh46635 ай бұрын
Hello Thanks for your videos! I do these on kraft paper bags, brown, so the engraving comes out dark on those. On those, It'll come out super krisp but then I wiped my finger over the image it wipped the image away a bit! I removed some of the burnt residue it seems. 1) Does this happen with coloured bags, and 2) any tips on how to prevent this / lock in the engraving so it doesnt smuudge? Thank you so much.
@bresaydefoor28635 ай бұрын
hi lisa
@JasmineMitchell5 ай бұрын
Oh em geeeeee didn’t know I could do this rotatable and fit hack! Thank you! 5:12
@Ccescui6 ай бұрын
Hello, I use Silhouette on Mac, I could zoom in - out with 2 fingers on my touch pad but last night when I opened it to make a design looks like I clicked something by accident and the touch pad now only works to scroll up-down and left-right. I reverted to factory and reset but nothing, looked into my Mac's settings too. My touch pad gestures work outside Silhouette so its not my computer I think, more like a key I pressed cuz I remember it happened after that but I looked into all and I just can't find it. Took me way more time by using the stupid zoom in and out buttons when before it was just my 2 fingers. Do you have any idea? Thank you!
@whateyedocreations49216 ай бұрын
This is sooo beautiful. God bless you both ! Thank you for letting us be part of this blessing ❤❤
@user-ks1tv5xr4b6 ай бұрын
Help! When I save as an SVG it says there is an Export Restriction...it will display in the exported file as dotted line segments. Has anyone had this happen?
@user-ks1tv5xr4b6 ай бұрын
Ok...I saw that you need to trace the design first...BUT even when I trace my design, it still comes out with dashed lines when exported as an SVG. I'm not sure what I am doing wrong...can anyone help?
@fatinliyana39256 ай бұрын
Can you explain step by step ?
@user-ru9iu8fq4k6 ай бұрын
Do you still do training. I am having trouble with most on my glowforge aura. Most projects do not cut properly
@belindahopkins42946 ай бұрын
how does this not catch fire?
@shellz19666 ай бұрын
So incredibly precious Lisa! God Bless You and Your Beautiful Family!
@mollymadedesigns6 ай бұрын
Amazing.
@asinger616 ай бұрын
She is beautiful! Congratulations!
@cynthiabrown50127 ай бұрын
Such a beautiful blessing. May God continue to bless you and your family. Thank you for sharing with us and giving hope to others.
@Vinesvinyl7 ай бұрын
Congratulations, Not a dry eye over here!!!
@StrawberryRoseCrochet7 ай бұрын
Awww God bless you both!
@sabahfatima38907 ай бұрын
I have a question. I use procreate and trying to trace a recipe. I find my lines look jittery. How do you avoid that and make perfect curves so it doesn’t look like it was traced?