Hiya bud geat job saw this done in the middle east. They plasterboard the entire opening so its seemless and even put led strip lights in on the handle side so you knew where to push. Incredible
@WhatsMyLane25 күн бұрын
How would you rate this for absolute beginners to routers? Just bought a Katsu palm/trim router to try out, fancy getting one of these in the future
@jasonpaskin9089Ай бұрын
Where did you get the hinges from
@Bowman_joinery127 күн бұрын
Ironmongary experts .co.uk
@chriswilliams2865Ай бұрын
I'm a Carpenter/joiner sitting in my van watching a video of someone hanging a door before i start work 😂 37 yrs in the trade and still love it. Great job buddy 👏👏
@Bowman_joinery1Ай бұрын
😂😂 thankyou
@thetallcarpenterАй бұрын
I think your exactment/satisfaction of how well the door initially fitted, is a direct reflection of how much effort you put into getting all the hinged right👊Great job, and the door looks grand😎
@Bowman_joinery1Ай бұрын
Thankyou. It took a bit of time to work out exactly where the hinges where to go and I was soo happy when the door shut first time 😂
@Arstist_youАй бұрын
😮😮😮The life according to me
@Bowman_joinery1Ай бұрын
@@Arstist_you sorry what ?
@ilijadjujic5911Ай бұрын
I've only ever fitted the Howdens herringbone, there's isn't handed which simplifies things a bit
@ilijadjujic5911Ай бұрын
Sorry I missed the lvt in the title so ignore my comment, should of watched the whole video before posting 😊
@ReaIPavelАй бұрын
Самое худшее напольное покрытие - это паркет
@briankupfer4929Ай бұрын
That putty knife looks like a PITA in comparison to a normal notched trowel. Are you using it to be more accurate with your glue?
@Bowman_joinery1Ай бұрын
@@briankupfer4929 it’s just a smaller notch on the trowel. I prefer it as it gives a bit more of a bed of glue for the board to sit into
@briankupfer4929Ай бұрын
@@Bowman_joinery1 As long as it's within the manufacturer's requirements I don't have anything to say about it. That is very precise gluing in comparison to the way I always did it, got to be nice to have minimal cleanup.
@MADDABBER21Ай бұрын
It’s good to tape them together as your installing them so they don’t have a chance to move just use some blue tape that way it dosent leave any residue behind
@Bowman_joinery1Ай бұрын
Good to know for next time
@MADDABBER21Ай бұрын
@@Bowman_joinery1 keep up the good work I’ve seen a lot of people just phone it in and not care about what they are doing. I’ve been sanding and installing wood floors for 8 years and I’ve seen a lot of people that are just terrible it’s like common sense dosent exist in their world. This one guy I had working with me sanded his finger tips off on his one hand on the first day. I had him scraping and hand sanding the corners and this guy dident know to hold onto the sand paper so every time he hit the wall with the sand paper his fingers would slide across the the sand paper and eventually made them bloody he dident say anything until the end of the day and he was complaining about his fingers hurting I thought he was just being a baby but the next day he was complaining saying he can’t sand any more corners becasue his fingers hurt so much so I looked at his hand and his finger tips were so raw and red like he put them on a palm sander. I was in disbelief I’ve never seen this before I asked him to show me how he was sanding the corners and I told him what the hell are you doing are you some kind of moron and he got so offended and said don’t call me a moron. Then I told him to hold on to the sand paper as he’s sanding the dude never thought of that. The same guy also walked into a wall in someone’s house because he was on his phone all the time he also fell up the stairs walking up the stairs because he was on his phone
@johnmackay7789Ай бұрын
I've never done herringbone lvt and always wondered how you start it. I find using the concave blades (not the hook blades) better to cut lvt, the blade doesn't wander about the same as a standard Stanley blade.
@incredible8310Ай бұрын
If you cut the board on top of a another surface other than concrete, you will save your blades. Try turning over another piece and cutting on top of that, while controlling your knife more as you finish the cut
@normanboyes4983Ай бұрын
Thanks for sharing. I found it interesting that your last (and deepest) cut enabled the vacuum dust collection to be more effective.
@patchesZAАй бұрын
The Makita rail has a little lip on the t-track profile for the Makita anti-tip washer to catch on. This little lip will need to be trimmed off if you plan on using Festool OEM parallel guides, and other Festool rail accessories (like the Carvex rail base and router rail guides).
@davewright9312Ай бұрын
Those doors are 35kg and after a day mauling them you really know about it..
@randomstuff-un8teАй бұрын
What kind of dust extraction are you using in the workshop?
@michealarwood7488Ай бұрын
Not even a riving knife
@theofarmmanager267Ай бұрын
Is Festool over-priced? That’s actually a simple question with a more complex full answer. As stated, Festool have been fined for price- fixing but that doesn’t define as over-priced as they could be fixing a low price (unlikely but it happens). For me, the reality is that Festool price their goods this way. Bean counters and marketeers look to determine what price level the market will bear for each product and set their prices accordingly. This has little or no relation to the cost of the product (which includes cost of materials, manufacture, recovery of overheads, profit etc.) but mostly to maximising profit whilst achieving the required level of sales (no point in having a product which sell cheap but you can’t make enough; you aim to fill the production lines but no more). The key then is what the market will bear. This is a combination of the result of the marketing efforts (making the brand into highly desirable) through their marketing campaigns to influencers etc. and the effect of competition. For a product such as a domino, there is (currently) no direct competition and, it seems to me, the domino is priced accordingly. For items such as track saw, I suggest that the price is monitored to fit into the premium track saw category. Like all manufacturers, extra profit is gained from ancillaries. Sometimes, these can be almost insanely profitable. Many/most people buy branded Festool accessories to ensure the perfect fit with the master machine. This view encourages profits measured in 100’s of per cents. In my (long) experience, the dangers of the “Festool” type of approach to pricing are quite large. Over the longer time, people will begin to associate Festool with over-pricing. Once that movement starts, it’s very hard to stop it snow balling. Avoiding that is very difficult and something that prestigious brands spend more time on than anything else. That balancing act of maintaining the desire of people to pay much more for a particular brand is the true goal of the marketing department. As an example, does a Dunhill wallet do its job any better than much cheaper models? No, it holds cards and money equally as well but it’s the brand imprint that costs you the money. None of this is a slight on Festool equipment. I have a lot of it but thankfully bought it all some time before the current price levels. I rate most of it highly for design and build quality. But, I maintain that hobbyists don’t need to spend that level to meet their needs
@mixedmartialmayhem7703Ай бұрын
Looks mint brother 👏
@rabmcleod3508Ай бұрын
Buy a Hilti 3 mtr track which fits the Festool perfectly and as it’s wider with built in carry handle it doesn’t have the same problem as the Festool tracks bending plus the extra length is a real bonus. That’s what I use for my Festool track saws in the shop and on site.
@billybike57Ай бұрын
Yes! Yes! Yes! 🥲
@samstrain1998Ай бұрын
Hard to beat a wee Ace Ventura quote 😍
@sixpotshot2 ай бұрын
Always shop around...ny company will try to take advantage of whatever when think they can...and one of the reasons why companies try to have proprietary systems (to keep their customers as unwarranted prisoners...) if buyers let them then they will get away with it. Do you know why car dealerships have a terrible reputation for poor customer service? Because most car owners soak it in rather walking away. It is one of the consequences of the "I Want" disease tipically exemplified at the end of the spectrum by Porsche GT car wannabe customer or one that turns up to buy a brand new Ferrari without proof of previous brand ownership.. . If people walked away at the first sign of shoddy work, and shoddy service plus rip off offers (a good price maybe still a rip off depending on what is attached to it and the service that they know the customer will never get...) we all would have a much better market. Festool as a system in unrivalled, unmatched and without parallel and their assistance does, at least sometimes, match it - one would have to be famous or being a very important customer to get the. same from probably most other brands including the rarefied field of Maffell and Hilti.
@Tensquaremetreworkshop2 ай бұрын
Of course they rip you off. They were fined millions by the EU for price fixing; look it up.
@kevinthomson63242 ай бұрын
Should we tell him makita makes the saws as well …
@Joyjoiner2 ай бұрын
Where did you get the makita rail?
@TrevorTraub2 ай бұрын
I went through this exact same thing 6 months ago. The festool track is pushing $800 in Canada. I got the makita on sale for under $200. For that big of a price difference, I can live with buying different attachment brackets for my parallel guides ($80).
@Anton-20012 ай бұрын
The only bad thing about Makita tracks is that they don’t accept all the festool accessories for example track squares or parallel guides Makita’s track has the non tip guard that is good for when you make bevel cuts then the saw can’t tip over (for makita track saws) not on festool 😊
@brokenbarbespoke2 ай бұрын
I've tried a few combinations, and you could also apply your same logic to the wen/powertec tracks. The Festool track is also not exactly the same, it's slightly different in thickness and the offset for the splinter guard is not the same. I don't think they're ripping people off, but instead passing a lot of the tool R&D/Production costs for their tools onto consumable parts as it makes the most profit. My experience found that when switching between the different tracks and saws the offsets would need to be changed, so in this case, your mileage may vary for your end results.
@feechl2 ай бұрын
Word of warning for anyone wanting to try this, you *really* want to test your Festool on the exact Makita track before buying it. With my TS 60K, I ran out of adjustment on the rear knob/cam/gib so my saw was unable to get a snug fit on the Makita track. As a result, the rear of the saw would wobble as I pushed it along the track. (In Australia, the 3000mm Makita is $289 and the Festool $880!!)
@TheDaniel85Ай бұрын
I've also had cases of Makita rails been so far apart in profile that they could not even remotely line up with each other... Probably why you had issues.
@mirosawkaras23712 ай бұрын
Check if it is really straight. I had to return it twice.
@derekwilson2852 ай бұрын
Just get a festool sticker. Wang it on.
@mixedmartialmayhem77032 ай бұрын
Festool definitely ripping people off. Not sure how the algorithm put me on to you but I’m a carpenter from Australia, I’ve chucked you a sub so it will be nice to follow some trade content from Ireland. Cheers mate! 🍻🇦🇺
@campbellbuilt2 ай бұрын
I’ve experienced thickness variations with the Makita tracks and switched to Festool. Went from the 36v to recently the 40v Makita track saw but I only run Festool tracks. Makita saws are great but their tracks from when I was running them were questionable. Please don’t construe my comment as argumentative or offensive, just my experience friend.
@bootsmclaughlin14382 ай бұрын
Did you make the mft top yourself bud or any info on were you got it with all the fixtures
@bootsmclaughlin14382 ай бұрын
Nice job
@bootsmclaughlin14382 ай бұрын
Good stuff big man
@denthefirst2 ай бұрын
Haha.. i would name it Makitool 😂 . 3m one cost here in Vietnam about 110€
@MMMS752 ай бұрын
I did one better and bought the Makita track saw too! Haha! It’s my favourite tool in the shop. I gave two 55” rails and the TSO connector. Dead straight and economical. I just don’t have the money for Festool tools quite yet.
@billystray7007Ай бұрын
I wouldn't worry about it, I have both and don't notice a difference
@valis67612 ай бұрын
First, check it if it’s straight. A lot of them are not. If you use both makita and festool rails, you’re going to do fine adjustments every time you change between them. They are not exactly the same
@gradymatteson32892 ай бұрын
This! If you’re going to be ripping /crosscutting and swapping between makita and Festool rails, it sucks to have to micro adjust them when swapping back and forth. Also, the splinter guard on my long track (makita) falls off over time, I even swapped it out to the Festool splinter guard because I already had a roll of it. All of the splinter guards on my Festool tracks have stayed put, even in extreme temperature swings.
@spbygga8123Ай бұрын
I bought 2 3m makita rails and when I put the back to back, they were touching both ends and a 1mm gap in the middle. I bought 1 to cut in half because I wanted a couple of shorter ones and I read there was inconsistency between profiles on different length makita tracks so it wasn't a problem
@brandon909Ай бұрын
@@gradymatteson3289 I agree 100%. I have to do that when I’m using the mft 3 cross cut system and it does become annoying when you have a small shop and the track saw is your work horse for large sheet goods.
@JBSeymour2 ай бұрын
I have both rails and im sure the makita rib is slightly larger. If you have the newer festool rail joining bars they fit properly in the festool rails but seem to need overtightening in the makita rails. Obviously mot an issue with 3m rail😊 Is it dead straight? If you put the 2 cut edges side by side are they flush at the ends and middle?
@trevorobrien-sr5vk2 ай бұрын
riving knife.... i dont use one either. but im not a dumbfuck. i still have all 6 of my penises
@fathogwoodworking2 ай бұрын
That price difference is unreal. I’m sure you could buy a couple of festool stickers if you really wanted it to match.
@ryanwatkins40472 ай бұрын
Lovely stuff 👌
@Bowman_joinery12 ай бұрын
Thank you! Cheers!
@SzechuanChickenDog4 ай бұрын
Eff these people...doing construction in any house causes dust...and I wouldn't worry about breathing this much dust one day...people are too alarmist... I've never heard of any granite guy getting silicosis...its mainly coal miners...and it takes years for that
@ML-dc4qw4 ай бұрын
I’m sure that homeowner,especially the wife, was extremely happy with the amount of granite dust you blew throughout that beautiful new kitchen and the rest of the house Einstein. Next time have your partner, Dill Doe,hold another vac hose at the front of that blade ,being that you need to make half a dozen passes to cut through that granite Jackie J-Oh.
@Bowman_joinery14 ай бұрын
Wow bet your fun to hang out with 😂
@ML-dc4qw4 ай бұрын
@@Bowman_joinery1 You’re GD right I am! Nostrovia!
@jorglange26664 ай бұрын
Expensive saw to f up!
@Bowman_joinery14 ай бұрын
This blade is especially made for tracksaws so as long as you take your time you’ll not wreck anything
@jorglange26664 ай бұрын
@@Bowman_joinery1 We used an old track saw to cut cement board siding and the fine dust f it up, we blew the dust off regularly but it blows in even more and it gets in the bearings, motor etc and all the saw movements got sticky.
@davidrader22824 ай бұрын
Can you post the blade you used for this please? All the track saw blades I have found are just for thinner fibrous board. Thanks!