@ryandinhotenacious3999 not that I know of I have his info below I use him for all my printers
@carmelosuchi742919 күн бұрын
Btw, timing Is wrong..should be at least 1 minute.
@graphicallydeb989723 күн бұрын
Supa Color has gang pages. I just did one that was 22"x5' Excellent customer service. But I am looking at TKO for 1 color, and looking for a wider gang. It was fine for a smaller shirt I did a number of them full color and came to $2 a shirt for the transfers. What I would love to find is something that would not feel like plastic on a shirt.
@waldo241323 күн бұрын
try a dtf or soft transfer
@jessiegibson9023Ай бұрын
Thanks
@waldo2413Ай бұрын
thanks
@MannyzCustomzАй бұрын
What to him ? I miss the content
@waldo2413Ай бұрын
hes doing good
@MannyzCustomzАй бұрын
@@waldo2413 that’s great to hear!!
@jonathanr7520Ай бұрын
Good vid
@waldo2413Ай бұрын
thanks
@mdbizzlАй бұрын
I just had one come apart the first time loading it. 😬 Extra quarter turn to snug up the pin screw my ass! Fucker is getting some blue Vibra-tite gel. It’s been sitting in my safe, no clue how it worked loose. Now I understand why some folks don’t trust the Shield mags.
@waldo2413Ай бұрын
Ive never had it happen but nothing is perfect but i still like them they are still working good ill check them more that i know people have that problem
@jessiegibson9023Ай бұрын
Nice
@waldo2413Ай бұрын
thanks
@jessiegibson90232 ай бұрын
Thanks nice
@waldo24132 ай бұрын
thank you
@pattyb13962 ай бұрын
Prayers!
@waldo24132 ай бұрын
thank u
@jessiegibson90232 ай бұрын
Good video thanks looks good
@waldo24132 ай бұрын
Thanks for watching
@georgelopezdesigns26002 ай бұрын
Glad your back at it. It seems that those that I have learned from when I started right before the country closed down have had changes in their lives and don't post that much or at all. It's called life and I hope everyone the best. Always look forward to learning from you. I have gone through some ups and downs financially since I have started my journey but my optimistic personality does not let me give up.Take care and I will always look forward to your next post.
@waldo24132 ай бұрын
thank you and if you like doing it keep doing it it will pay off in the end it might take sometime but things always work out
@adambaker292 ай бұрын
Ty - much better than the company website directions
@waldo24132 ай бұрын
thank you
@jessiegibson90232 ай бұрын
Good video thanks looks good
@waldo24132 ай бұрын
thanks
@leviteapparel2 ай бұрын
😂😂😂 Bro b shorts getting out of pocket, I've been strolling for 3hrs, I finally realized I was watching your video.
@jessiegibson90232 ай бұрын
Good video thanks looks good glad to see you again prayers
@waldo24132 ай бұрын
thank you
@LillyVeeee2 ай бұрын
Glad to see you’re back!!
@waldo24132 ай бұрын
thanks how you been doing?
@leonardo290982 ай бұрын
waldo is back.
@waldo24132 ай бұрын
im trying
@marniharris34212 ай бұрын
Good to see you dude! Sorry to hear about your Dad. Hope you can get more content out soon. Safe travels.
@waldo24132 ай бұрын
Much appreciated!
@humberger20112 ай бұрын
Great step by step instructionsl video. Thanks for sharing with us. Please bolt your heat press to your workstation surface or use dual hole pipe clamps to attach it to make certain it doesnt flip over forward, also raise the front feet about 3/8" higher than the rear feet to prevent the slide out from moving out.
@waldo24132 ай бұрын
i will i have a base for it but i never put it together
@MakingwithMarilyn2 ай бұрын
It's good to see you back. So sorry you have gone through so much over the last year or so.
@waldo24132 ай бұрын
thank you
@Novoworks2 ай бұрын
2 Corinthians 1:4 who comforts us in all our affliction so that we will be able to comfort those who are in any affliction with the comfort with which we ourselves are comforted by God. Romans 5:3-5 Not only so, but we also glory in our sufferings, because we know that suffering produces perseverance; perseverance, character; and character, hope. And hope does not put us to shame, because God’s love has been poured out into our hearts through the Holy Spirit, who has been given to us.
@waldo24132 ай бұрын
thank you so much them words helped more then you would know
@leviteapparel2 ай бұрын
Hello long time
@waldo24132 ай бұрын
hows things been with you
@killerjms212 ай бұрын
Prayers, i just had a heart attack a couple weeks ago.
@waldo24132 ай бұрын
Ill keep you in prayers
@denisestewart29572 ай бұрын
Take it one day at a time my prayers 🙏🏾 are with you and your family just keep the faith & never stop moving
@waldo24132 ай бұрын
I will thank you
@jessiegibson90232 ай бұрын
Thanks Waldo good video prayers for you and your dad
@waldo24132 ай бұрын
thank you
@LanceMcGrew3 ай бұрын
Interesting technique and will have to try but dealing with shrink wrap is a major time-suck.
@waldo24133 ай бұрын
i dont use shrink wrap any more i tape and use a mug press
@juliolovesana4 ай бұрын
are prints durable on polyester?
@waldo24134 ай бұрын
yeah they hold up great on polyester
@Bigmatt9414 ай бұрын
Original Glock mag is 10 rounds. Not 13.
@chitowntexan4 ай бұрын
I started doing all my boxes & i love it. Gives it such a great look.
@waldo24134 ай бұрын
That is awesome!
@user-ls7gw1gf1e5 ай бұрын
Can't cope with thd messy workspace arghhh😮
@waldo24134 ай бұрын
my shop is busy i dont always have time to clean it up
@dianab39275 ай бұрын
I need for you to show me what settings you use before printing
@waldo24134 ай бұрын
i cover the settings in the videos
@clickdollars98835 ай бұрын
so you dont need any "power" like the dtf films?
@waldo24134 ай бұрын
some dtf needs more then others depends on what your pressing
@Graeme7585 ай бұрын
New drinking game. Take a shot for everytime he says 'what you're gonna do'. Pissed by the three minute mark.
@Graeme7585 ай бұрын
Wow, had to explain how you cut the sleeve in half. Were you expecting an American audience?
@RaiderDilly7 ай бұрын
Good lord, halfway in the video and all this dude has said is ummm and the same information multiple times.
@waldo24137 ай бұрын
sorry u didn't like the video I put all the info in the video
@user-uf4zt5sq3q7 ай бұрын
I LOVE the shirt guide you’re using! Can I get a link?
@waldo24137 ай бұрын
people just laser them out u should be able to find them anywhere ill try to get a link
@jeffye51617 ай бұрын
Always be with you
@waldo24137 ай бұрын
thank you
@jessiegibson90237 ай бұрын
Thanks prayers
@waldo24137 ай бұрын
thanks
@chadcollins38217 ай бұрын
I pray God gives you peace and comfort during this Holiday Season
@waldo24137 ай бұрын
thanks
@RVincents7 ай бұрын
This is a good method. I wish you had a tape dispenser, it would have gone more smoothly. Because I really like how you made the cuts vs the way everyone else does it....
@waldo24137 ай бұрын
thanks I do have a tape dispenser now
@RVincents7 ай бұрын
@waldo2413 lol yayyyy it was the first thing I got..I have them everywhere lol
@georgelopezdesigns26008 ай бұрын
I am posting this to several peeps to see what are your thoughts on something that bothers me. I wish that companies would change their business models so that they would attract and keep customers loyal. For example. I understand that I am the only person in the world that has a full time job and is trying to make this garment industry my full time gig. I wish to add an embroidery machine into my arsenal but... I have to purchase a multi thousand dollar machine then and only then, will I have access to the training videos. Between my full time job, client projects and family life, I don't wish to have a $10 - $20+ grand paper weight sitting in my garage while i watch the training videos during breaks, lunch time or when I have some free personal time so I can finally be able to actually use the machine in a competent manner 3 - 12 months later. I would rather pay a $200 - $300 dollars to have unlimited access to all the training videos for any multi thousand dollar machine that I wish to purchase so I can watch and learn at my own time. That way, when I am actually ready to buy those expensive machines, I will be ahead of the learning curve when I finally receive the unit and hit the ground running in my offerings to current and future clients.. If the manufacturers would allow the pre-paid monies for one to watch the training videos turn into a "Down Payment" or a "Lay-A-Way" type payment towards the unit, that would be even better. The above scenario would let me know that the companies that make or just sell the machines actually want me to succeed and do well. Not only that, It would actually make me more loyal to their brand knowing that they have my back. What are your thoughts on this topic. Would you have wished to be able to have access to all the training videos prior to your purchases of your equipment so you could have hit the ground running?
@waldo24134 ай бұрын
i think more should have videos to help and give them for free most work on selling not support i hope it changes my dtf has some of the best support but not all companies do it like that
@markellewass73068 ай бұрын
What size shrink wrap sleeves were those to be able to cut and get two out of it?
@waldo24138 ай бұрын
they were some i had for tumblers
@kcjleemx58 ай бұрын
I'm getting married in February and I want to buy Robes that are 97% polyester & 3% spandex. Would DTF still work on those? I don't want to pay the extra for embroidery since I'll need quite a bit of them.
@waldo24138 ай бұрын
yeah just heat press at a lower temp 265 to 280 it should be fine
@kcjleemx58 ай бұрын
@@waldo2413 Awesome! Thank you so much
@mommarl7299 ай бұрын
Really good seeing you. I am so glad you’re back.😊
@waldo24139 ай бұрын
thank u so much I'm going to try to post more
@jessiegibson90239 ай бұрын
Good video thanks looks good good seeing you again
@waldo24139 ай бұрын
thank you
@marniharris34219 ай бұрын
YAY! glad you'll be back
@waldo24139 ай бұрын
thank you
@MMMMyMusicMoves9 ай бұрын
I just got my new heat press same as this yellow on in the video but I’m having a white ghost line going down the tumbler never had that problem before and it’s in the middle of the tumbler not the tape part any advise
@user-sm9uy4pm7e9 ай бұрын
Do you have to put anything under the shirt to keep the transfer from sticking to the mat? can both side be pressed simultaneously?
@waldo24139 ай бұрын
nothing under it never sticks the heat wont be the same on both sides so i do one side at a time and it would be hard to line both sides up cause dtf dont stick so you would have to tape one side
@GarbageMail-nm2gx9 ай бұрын
You are ambidextrous! Most people would turn the mug upside down and continue with the heat gun, but you switched the heat gun to your left hand. Good job! What kept the shrink wrap from pulling away from the tape? I'm trying to do just what you did with no luck, it keeps ... well... shrinking and leaving a gap.. You probably won't answer, the video was 2 years ago.
@waldo24139 ай бұрын
you just want it to shrink enough you dont want it to melt or pop the tape you can put more tape on also the tape can handle the heat overt lap the shrink more that might help also