I need to know how companies make Eco flex soft material and where they get it from how do they get it from the earth I want to be able to make it my self.
@wolffang4894 күн бұрын
I've been researching papercraft toy guns recently. Wonder if those parts could be molded out of scraps and rice this way instead of piles of craft cardboard and superglue.
@phunkytier9 күн бұрын
Have you tried with hemp paper? It gets very hard and is called Hempstone.
@TcVideoHosting10 күн бұрын
I need help with a mold
@keptleroymg687712 күн бұрын
Seems good for sound absorption panels since the material is cheap and I think less reflective than pla. A single press could fill a wall and they are large but flat so not hard to dry cunny
@table_f0rk13 күн бұрын
🦒
@psargaco17 күн бұрын
Great video, dude. Congrats. I have a question, hopefully you'll see it and, even better, answer it. Some decades ago I visited the California Science Center and one of the exhibitions had an insect infestation because they used... oat, I believe, as the binding component. I'm wondering if using the rice paste won't incur in the same risk.
@psargaco17 күн бұрын
Oh, oh, I have another question. I'm considering trying this solution but adding shredded corks. Do you think that will work?
@sugrovids20 күн бұрын
I love you !
@JanoschNr124 күн бұрын
OMG they still exist and this time is nots reversed! 😲
@badsamaritan822325 күн бұрын
These seem like a great medium to make sound isolation panels out of, for basically free.
@SchmuniАй бұрын
You seem long.
@XYZAidanАй бұрын
Correct.
@torynhill8956Ай бұрын
If you used Titebond 3 or perhaps even epoxy (though you'd need to cure your pieces) as your binder, instead of Elmer's glue, you would gain a great deal of water resistance, and your objects would be more suitable for use in something like a sculpture... Man this video was awesome, you got my head spinning with ideas!
@XYZAidanАй бұрын
Both of those are plastic, and so largely defeat the point of this project and material.
@jeremy6384Ай бұрын
you can also change settings in your slicer (cura etc) and see how print times change. Im using a .8 mm nozzle and .7mm layer height currently since I am printing bigger things that do not have detail, do not need to be smooth, and will not be holding weight. So far these prints are finishing faster and work fine.
@Obliv210Ай бұрын
You probably won't respond to this, but; Have you tried mixing the cardboard with plastic? Then 3d printing with the mix?
@XYZAidanАй бұрын
No, and I don’t really care to given mixing the pulp it with plastic would make it no longer biodegradable.
@Obliv210Ай бұрын
@@XYZAidan what sense does that make? you dont refuse to use plastic because it isnt biodegradable, right? & I mean technically it would be recyclable; if you were recycling this product as a plastic, it would need to be melted down anyways which would burn away the pulp. have you seen mixing sawdust with ice? pretty neat. pulp is just a fibrous form of sawdust, for the most part. essentially I think it would just be use of a filler of some sort that might have specific use cases.
@XYZAidanАй бұрын
@@Obliv210 The whole point of this project is that it creates 3D forms out of a material that IS biodegradable and compostable. Mixing plastic into it defeats the purpose. Also, fiber mixed with plastic would definitely not be recyclable. The temperatures used to extrude thermoplastic is not hot enough to cleanly burn paper. Maybe it could char it, but that would ruin the plastic.
@matthewkopp23912 ай бұрын
Although this is a four year old video I will say making it out of abaca banana plant fibers will make it more water resistant and increase strength, even if you mix it half and half with recycled cellulose. You can also include certain additives for example latex which is biodegradable but would greatly increase water resistance and overall strength. There are other natural ingredients like gelatin or chiton powders which will have similar effects but increase rigidity.
@scottgray62762 ай бұрын
There’s a paper slip casting product called, Flumo…l think it comes from Spain, that works with plaster molds. I’ve been trying to make my own, but nothing promising, so far!
@CUBETechie2 ай бұрын
Can you add it with moss seeds?
@jamesspry32942 ай бұрын
You could use a wood stabiliser like "Cactus Juice" (& a vacuum chamber). That would impregnate all the cellulose fibres, and make it not only resistant to water, but hard enough to use almost any woodworking process (lathe, drill, saw, dowels, screws etc.)
@Freddan02 ай бұрын
why no videos in last few weeks????
@jerbear79522 ай бұрын
Great work. What about as a substrate for fiberglass the way people use foam
@Codename-B2 ай бұрын
It looks ideal to make seed pucks.
@dresplays4days2 ай бұрын
@XYZAidan - would it be possible to use 100% cotton fabrics scraps to make the pulp?
@abelink92292 ай бұрын
I wish companies used it in packaging instead of styrofoam.
@lyokofans2 ай бұрын
Pretty cool idea and use of stuff that would otherwise be trash.
OBVIOUSLY covering the entire part with plastic makes it watertight, but that also makes it A. no longer biodegradable and B. impossible to recycle again, defeating the entire point of the material
@Galindorf2 ай бұрын
I love this! My brain just went on 500 tangents for how to use this
@ArtisticInspirations.2 ай бұрын
Neat idea
@idlerwheel3 ай бұрын
Could you make internal structures of a speaker with this? I mean the inside of the speaker doesn’t need to be watertight, right?
@digdugdaddy31793 ай бұрын
I believe that small containers made using this process would be PERFECT as planters for seedlings. Then, instead taking the seedlings out of a plastic container, the entire thing could be stuck into the ground to grow the plants. Excellent work XYZAidan!
@manuellife1743 ай бұрын
Nice video
@jballenger92403 ай бұрын
Bravo!!!!
@Tofu_Bunny3 ай бұрын
Make a sphere, sand then polish it to a high shine. See how shiny you can get it.
@XYZAidan3 ай бұрын
why though
@okj19993 ай бұрын
Could really use you now to reverse engineer that $2500 willson 3d printed basketball on a fdm printer.
@E6Jazz3 ай бұрын
that was not the voice i expected
@Postal2683 ай бұрын
I can't wait to see all the remixes for this. I have a ton of boxes laying around already.
@nikolaiwiltjer81113 ай бұрын
Wax
@snorttroll43793 ай бұрын
how durable are these?=
@SpongeBob.Ripped3 ай бұрын
Aidan, whats a better way to contact you to show you something related to this, that jsnt just a text based KZfaq comment?
@XYZAidan3 ай бұрын
Email address in my profile
@SpongeBob.Ripped3 ай бұрын
@@XYZAidan I emailed you now. Subject: About your 3D printing.. cardboard recycling project
@sjhall20094 ай бұрын
From what I've read, PVA glue can be broken down by bacteria into Water, Acetic acid , and natural gases including carbon monoxide and carbon dioxide.
@XYZAidan4 ай бұрын
Can I ask what your source is on that? I’ve read a lot of conflicting literature, it seems that at the very least it needs very specific conditions to break down fully
@NemesisIrae4 ай бұрын
Now I can make my own Ikea-quality furniture from egg boxes :D
@SnoringVids4 ай бұрын
Are you worried about MOLD?
@XYZAidan4 ай бұрын
Nope, none of the parts I’ve made have ever gotten moldy.
@SnoringVids4 ай бұрын
@@XYZAidan awesome thank you for the reply! My girlfriend's into sustainabilityi appreciate you introducing us to this idea
@ExercisingIngenuity4 ай бұрын
Super cool concept, I like the versatility of the material, and it's complete compostability!
@ashblack43514 ай бұрын
This video is awesome. Thank you for sharing and explaining everything so clearly. Great details. I think it's great what you're going. Thanks again
@mitchstilborn4 ай бұрын
Well done man.
@UnknownMe3214 ай бұрын
Imagine if you added some glue?
@hevc66494 ай бұрын
4 years on how is it holding up?
@XYZAidan4 ай бұрын
All the parts look pretty much the same as they did in the video. A lot of people have the idea that this material would spontaneously get moldy or attract pests but that hasn’t been my experience.
@andregiger38224 ай бұрын
A possible idea for waterproofing: If paper is soluble in orange oil, you could dissolve beeswax and paper in orange oil. After pressing, the orange oil will evaporate and the beeswax is left behind. This should make the thing waterproof(ish)...maybe. Downsides: it will most probably be flammable, it will smell from orange oil for a long time and depending on the polymer used for the mould, the orange oil could also dissolve the mould. But if paper is not soluble in water, you could soak it in a solution of beeswax and orange oil in order to make it waterproof(ish).
@julietardos50444 ай бұрын
This is very interesting! Thanks for making the video about it. Waterproof cardboard bicycles exists, so I don't see why you couldn't waterproof anything you make with this process.