A swamp cooler IS an evaporative cooler! 😂

I have a miniature & am thinking of getting a floor model & maybe a roof model. My central AC simply gets no air to my top floor-waste of money that was. I have 2 heat pumps that work fairly well as cooling units but I'm going to need more.

I can't get grass to go in bag?

This is no good without a temp gauge.

Why the annoying background music

Sounds like a old school educational film.

Pump has failed and now I can only use fan. I have searched for a pump replacement to no avail!

They look nice, but they are hard to remove if you need to service the deck in the future

I used the Camo deck fastener on my back porch floor and steps. Very easy to use. After I was finished, my wife asked me when was I going to nail the boards down. Told her that they were already screwed down. She was so used to the old nails always coming up and possibly hurting the grandkids. I redid my porch over two and half years ago and not a single screw has ever come out or up. Made quick work of screwing the boards in place.

Amazing and simple explanation Keep the good work Thanks for your video

has false lock and that’s how u get hurt. they changed it to a 2 sectional ladder to back away a defective ladder to hid from law suits. anyone get hurt i like to hear your story.

I’m just going to buy 94 clamps….

This is true. I have all of these products. They will take a beating and still play amazing!

It’s a piece of crap. Does not cut hard wood at all.

I feel bad

I like its weight. Not too heavy, not too light. The only thing I don't like about it is that the holes to vent the motor are not protected. I understand that the air can get in easily, but so are the tiny screws and debris. I had a near miss once. I had to duck tape it ever since and cut smaller holes myself.

The very part I needed wasn’t in the video. How tf do I cut my top and bottom of my steps

1:15

Thanks for subbing

no gloves or rings my friend

You should of shown how you added more backing for the stringers to be secured to!!

Just got one for a deck build next week. Looking forward to it. I have the same drill press as you. Mine is an old one passed down to me from my Dad. Thought it was a lonley relic! Cheers!

Great

Easy peasy - but seriously. Woodwork is a skill that requires so much talent in my opinion. Its beautiful what he is doing.

I like what you showed and described about basic stair stringers. I have a couple of questions... 1. Is it important to factor in the tread nose? 2. When you mentioned the "front" of the stringer does that include the thickness dimension of the riser from the landing to the underside of the tread? 3. What hanger device did you use to attach the stringer to the rim joist? Thanks

Sería bueno tener el desarrollo de la confección y plano, porque el diseño esta muy bonito

I expect this mower will last several seasons with decent care. kzfaq.infoUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend Also, I ran across the problem with it not starting the 2nd time I used it. There is a safety switch which is pushed in by the chute or mulching piece being attached to the deck. I took the cover off and it wouldn't start. Put it back on, no problem. It takes only a minute with 2 easily accessible wingnuts and no tools. This mower starts up first crank each time and it is a joy to use. It also mows in reverse by putting the key to the reverse area after starting and pushing in the triangular button. It will stay in reverse mode until you turn it off. All in all, for my homeowner needs, I really like this mower-and at 70 bucks a cut here in Miami, it's already more than 1/3 paid for itself in a month.

Lightweight is good and what did I use it for it’s a lawnmower kzfaq.infoUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend Yes it is lightweight so hence not as robust as our old one. But if you take care it does the job really well.

Love this lawnmower kzfaq.infoUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend although it has a smaller cut in the grass it's easy to maneuver and very lightweight, would highly recommend for somebody older that lives on their own and has to cut their lawn.

I'm used to larger, corded routers kzfaq.infoUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z so this was a different experience for me. Basically, this is an incredibly sweet machine, fits well in the hand, etc. It has slightly less power than I'm used to, but that's understandable. Maneuvering freehand takes some practice. These days, it's especially nice to be able to avoid power cords. This is above the level of a hobbyist but below a pro level.

I am a homeowner with a day job who does not do anything construction related for a living. That being said I am working on framing out my basement and Bought this kzfaq.infoUgkxHQsUrwNr5GQrnx9V4xDdUr56qxwuiBHt gun. I have done a few walls already, have probably shot a couple hundred nails through this thing and have yet to have a misfire. It works awesome, good depth on every nail if you have your compressor set right. My literal only complaint is that it is a bit heavy and my arm can get a little tired especially whrn I am nailing at odd angles. That being said I am super happy with it and would buy it again. Hoping the old girl allows me to get my whole basement finished out!

I bought this nail gun as we were planning to renew all the fencing in our back garden. As this involved 19 double slatted fence panels, 10 of which needed to be cut down in size, we knew there would be a need for a great kzfaq.infoUgkxHQsUrwNr5GQrnx9V4xDdUr56qxwuiBHt deal of re-stapling the wooden slats to the wooden framework. Each alteration required the re-stapling of 62 wooden slats with double staples. Prior to starting the work we ordered sufficient additional staples as per the instructions with the gun.The gun performed fantastically throughout the entire project with no jams of misfires. The adjustable power was excellent allowing the staples to be fired into the 8mm slats to the correct depth. For the price paid this was a bargain and it proved itself to be so reliable and versatile making an arduous task much quicker and professional. I cannot recommend this product highly enough and it will be used on many other projects in the future.

Versatile Tool

why the obnoxious music? unbelievable

I was a lifetime member of the Handyman Club, and then they disappeared. What's up?

This 3 part video leaves at least 50% of the work out of the video. Omitting an important half of the work. Leaving so much room for error😅

This is a confusing video showing you work on opposite side and some how making a perpendicular line.. what?

Kreg makes a jig system similar The screw goes in a little further down the shoulder

Sheet

this is definitely not a "BASIC" stringer, this is more "CUSTOM"

First thing to check is that the edges (or lines you are measuring to) on the lumber for the stringers are straight.

I heard it's expensive compared normal screws and tends to split the wood, is this true?

A gherkin for sure, hes probably working at Starbucks now

I used this as well. You really need to make sure it is 100% flat down on both sides or you ll have visible screw holes.

I prefer using a shale bar over a pry bar personally when dealing with rocky earth and doing it by hand. Slamming down with a 6 foot steel bar gets it done quick. If i wasn't so cheap and raised the old school way of doing things the hard way I'd probably rent the auger.

My oldest son is in his early 20's and he has type 1 diabetes. But thank God for this piece of article kzfaq.infoUgkxVYhghKWmrUgXARZ_ydZTvmmcrw5L0I5i At first he thought he had the flu and was lying down on the bed for three days until his sister took him to the hospital. They took his blood and it was 600. What I do not understand is how he could have gotten it, since no one in the family has it. But he is winning the battle now. This is good stuff.

How do I test myself for diabetes?

This is a brushless correct.

MUY buena calidad, el texto imagenes. kzfaq.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO Un manuel muy completo y trabajado. Resulta muy práctico. Para principiantes y profesionales. Lo recomiendo

This is a valuable addition to my woodwork collection kzfaq.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.