That came out really nice ! instead of steel wool i use tin foil and water with a dash of white vinegar .The tin foil wont scratch the chrome because its softer than chrome but harder than the rust.
@seahawksforever9504Күн бұрын
Can you test without the fins? I have a sports bike...
@KeepOnWrenchingКүн бұрын
Just need to ground it.
@neilmoore7805Күн бұрын
Great job! Glad you were able to get some satisfaction
@twistedgreymatterКүн бұрын
Looks great! Definitely need some new wheels.. I'm sure they're on the list, though.. keep on wrenching!
@pstreetgarage7304Күн бұрын
Nice job
@ernestporee36972 күн бұрын
Get some speed shapes and practice also light coats and you have to seal before you clear
@jcb3552 күн бұрын
Did you know you could have polished the Spaz? It'll turn from gray to gleam... somewhat... but it sure won't look like the mess you made. That might be the worst results I've seen out of Spaz. Impressive!
@maakatipa46132 күн бұрын
I've used a chrome paint before and although not perfect,...it looked 150% better than what you did !!! You Didn't wait long enough between coats, you chrome coats were way too heavy, and again didn't wait long enough for things to set up. I when I did mine I waited overnight between primer, black and then again between black k and chrome !!!
@1985_Honda_CRX_Si2 күн бұрын
Real nice
@KeepOnWrenching2 күн бұрын
Thanks! Excited to close to wrapping up this project.
@laszlocsala2 күн бұрын
Amazing job
@MaryK42422 күн бұрын
Doing this right now!! Came back here to re-watch and freshen up on process. Thanks again.
@davee57822 күн бұрын
Excellent videos Man. I have a 72’ CL 350 and your videos are wicked helpful.
@alanatkielski25722 күн бұрын
Here’s a good tip for you to use. Use golf tea’s upside down to hold up small parts that have a hole in them. A good stable base! And, on the painting small items like that was a heat gun on the lowest setting, after a few minutes of spraying . To help bake and set the parts coating even better.
@pstreetgarage73042 күн бұрын
Well done.
@fenthedog2 күн бұрын
you should have done multiple super light sprays. Thats why you use black as a base, you just covered the thing in the chrome paint, it needs just a thin layer.
@josephshehan49693 күн бұрын
Try putting some vinegar in your water?👨😊
@KarateSensei713 күн бұрын
I am glad Sean Astin found work after LOTR. I was going to ask if it was safe to get on the paint but I see you did not take care pouring it in so it must be?
@mrpib2723 күн бұрын
Thank you! I’m working on one and need a mentor lol
@eliseanderson-kern81783 күн бұрын
It works... did wonders on my truck rims. Obviously it won't take away pits & ripples but the chemical reaction works on rust.. not physical damage of rust.
@davidaldrich34883 күн бұрын
Well done….. on your way👍
@jlowbob42864 күн бұрын
if you clear coat the mirrored finish aluminium, would the coat stick to the surface of the aluminium?
@brad78614 күн бұрын
Tricky Bugger! "WAR OF ANGLES!"
@MaryK42425 күн бұрын
You did good dude. Nice job. Knucklehead me would have started at the edge of the O hole and prolly boogered it up.... derp derp. Lol
@JasonDodge5 күн бұрын
Turned out great man!
@BigDaddyMike685 күн бұрын
SCOTCH BRITE and Steel wool soaked in WD40 does a great job on aluminum. Crack a can of Nevr Dull Polish and "Rub One Out".
@francesco96675 күн бұрын
Troppo passaggi. Cambia mestiere.
@motofreak63655 күн бұрын
You should take it to an expert to lace it. You have a mistake that only a pro can see. The holes on the rims are half on one side and half on the other side. you lace the outer spokes to the other side of the rim. this is a huge mistake. If I were you, I would desapeer this video. This is the reason why only profesoinals should load wideos like this. the problem is that others will do the same as you and this can make security problems.
@airframer1205 күн бұрын
I feel like my weekend went fast… it only lasted minutes then I’m back to work 😂
@FirebirdBlack6 күн бұрын
I did the same the gauge didnt move
@andyreynolds12806 күн бұрын
Hi, first of all love your videos...su useful. Secondly I'm confused how you attached the brake linkages and it works as the dots on the link arms should line up with the dots on the centre splines..maybe I'm late to the party and you've altered since
@billmago79916 күн бұрын
thanks for that
@KeepOnWrenching6 күн бұрын
You’re very welcome. I remember being very puzzled by it.
@billmago79916 күн бұрын
thanks for that
@KeepOnWrenching6 күн бұрын
You’re welcome. I assume you’re working on a super Hawk!
@ramadiscrete56417 күн бұрын
wastage of money cheaper buying
@KeepOnWrenching6 күн бұрын
Oh well. It was a fun try
@tomgregory74797 күн бұрын
Thanks lot of help
@KeepOnWrenching7 күн бұрын
You’re welcome. Glad it was helpful!
@MaryK42428 күн бұрын
Heh, Oh boy. I just picked up a '69 CB350. Pulled a hamstring bad unloading it. Hate it already. LOL 😜😂
@KeepOnWrenching8 күн бұрын
Rest up. It’s just the beginning.
@matbesik7248 күн бұрын
🤦 sérieux
@pstreetgarage73048 күн бұрын
V nice 👍
@KeepOnWrenching8 күн бұрын
Glad that’s over! Lol
@davidaldrich34888 күн бұрын
Watching you is always fun. Your honesty and humility shines through
@KeepOnWrenching7 күн бұрын
Thanks, man! I appreciate that.
@tdg01019 күн бұрын
Looks good.
@KeepOnWrenching9 күн бұрын
I’m overall pleased.
@pstreetgarage73049 күн бұрын
Looking very good !
@KeepOnWrenching9 күн бұрын
Sometimes I even impress myself. Getting excited over here.
@robbie2awesome9 күн бұрын
epic bro
@KeepOnWrenching9 күн бұрын
Thanks, buddy! I’m kinda blown away that I pulled that off. Lol
@johnnyspropshop9 күн бұрын
Looking great, good job on getting it done yourself.
@KeepOnWrenching9 күн бұрын
Thanks, man. It was quite a process. Way bigger job than I anticipated. Feels great to turn this corner.
@shaehatfield18999 күн бұрын
Love it…better than using dremel?
@KeepOnWrenching9 күн бұрын
Dremel can’t get into the recesses. Shoestring get in there!
@neilmoore78059 күн бұрын
Nice job! I'm looking forward to your tips and tricks video.
@KeepOnWrenching9 күн бұрын
Me too! Lol
@tdg01019 күн бұрын
Looks good. 👍
@KeepOnWrenching9 күн бұрын
Thanks! Quite the process.
@stevelittle18859 күн бұрын
As Many have pointed out, The choice of demonstrating this Chrome spray on That old Pitted piece was not the way to go. I have to say I admire you Determination but I think a Fair test would be On a Smooth surface painted gloss black. Had you done a Piece not so Far-Gone It still wouldn't look exactly like Chrome but Waaay closer. As a few have mentioned "Revell plastic model Chrome paint" is the Best I have used. I think most that use that product would agree. Nonetheless a fun and entertaining video. CHEERS, SantaFeSteve