I have the 42" and after about 3 months of use the only thing that keeps the drawers in is the latches. The detent on the drawers that I use on the daily are basically nonexistent. It's a decent box. I'm an industrial maintenance tech and need to roll my box around and I have no complaints.
@bnorby2133 ай бұрын
Love it! Wanna order a 72 setup with side lockers and possibly a hutch but the depth is the only big negative
@wade-airdog77263 ай бұрын
Good review! Thanks.
@filipevieira60523 ай бұрын
One thing about the locking mechanism I discovered and liked as well: if you lock the box and have a drawer that’s still able to open due to not being closed all the way or whatever, you can just close the drawer and it’ll click in properly and then be locked. I know a lot of other boxes you’d have to unlock it, click the drawer in and then relock it
@flueky0214 ай бұрын
You should put all your sockets in one drawer so they aren’t scattered in lots of drawers
@EllieOnTheUpperTar4 ай бұрын
Removing the hood first will make servicing easier, especially accessing the fuel filter. Just detach the light harness and it will come off easy. I've yet to figure how to grease the driveshaft zerk without remvong the mower deck first. My dealer agreed that was the only way. I'd like to know your trick as that would be a big timesaver. Thanks for the video!
@RandyBobandy884 ай бұрын
Could you Give the viewers all the drawer dimensions?
@joachimbates53704 ай бұрын
What’s happening with that socket and nut? You don’t like the customer?
@Brythecarguy3024 ай бұрын
Use an impact and boom it’s done😮
@sholle95884 ай бұрын
A wrench will fit on the end of that tie rod end
@vmionescu4 ай бұрын
The owner didn't want that changed? It seems to have alot of wear besides the bolt situation.😅
@jesseespinoza46874 ай бұрын
Nothing knew...
@ButterfieldDieselRepair4 ай бұрын
Maybe not for somebody who didn’t know about it!
@megadethguym79774 ай бұрын
I was taught to lower the car on and with its weight on the bushing tighten the nut.
@ShortFingerRC4 ай бұрын
Holy crap man put that socket on that nut fully.....
@Bigdaddywoowoo3214 ай бұрын
Replace it 😂
@tylerfaber86484 ай бұрын
I have tekton wrenches and really like them. They have metric set of wrenches with no skips. I also have angle wrenches from tekton that come in supper handy.
@tedwilliams87664 ай бұрын
semi deeps in chrome and impact and impacting swivels have made wrenching for me much more enjoyable. plus they get you into those tough spots. also the double reversible ratching wrenches from harbor fright has made alot of jobs so much easier. probably my most used wrenches by far. theyre the same wrenches from matco, mountain, carlyle and a few others. some have 90 tooth and others have 72 tooth. nice box. looking forward to the updated tour.
@ButterfieldDieselRepair4 ай бұрын
Thank you!
@jeremydoblinger36094 ай бұрын
Id say buy the tekton metric wrench set,you can get them all the up to big sizes and no skips..great warranty also..and best price you will find in my opinion.
@ButterfieldDieselRepair4 ай бұрын
Thanks for the tip!
@edoc3214 ай бұрын
I highly recommend the Tekton sockets. Sunex makes great sockets too
@ButterfieldDieselRepair4 ай бұрын
Thank you!
@carloscastorena73824 ай бұрын
@@ButterfieldDieselRepairtekton sidewalls are thicker so keep that in mind for 3/8 I traded my su ex for capri and do not regret it
@Nordman5554 ай бұрын
No offence meant but your short on alot of tools do you borrow alot?
@ButterfieldDieselRepair4 ай бұрын
No, I just buy them as I need them but so far I haven’t ran into many issues. Thanks for your question!
@pedaltheglobe4194 ай бұрын
I have the same box along with the 56 inch bolted to it. Its a nice box for a DIYer but I cant see how any mechanic whose collection is evolving would not outgrow these fast. Drawers on most tool truck boxes are 50% deeper. Makes a huge difference.
@RandomBacteria4 ай бұрын
Honestly the main reason I got this box is because when my snapon guy told me how much the comparison would be I thought I could buy another one once I outgrow the one I got now. Or I might just wait till another sale and buy an addition box.
@bigjay6344 ай бұрын
For any impact sockets or tools I recommend grey pneumatic I have a few sets I love them. VIM Tools has a long that won’t break the bank either from sockets and ratchet to organizers and any and all hex/torq bits you’ll ever need. Gearwrench for wrenches of any kinds. Great tour not bad for what you have so far!
@ButterfieldDieselRepair4 ай бұрын
Appreciate the input man. Thank you!
@bigjay6344 ай бұрын
@@ButterfieldDieselRepair any time brother!
@giysih4 ай бұрын
Nice tour!
@ButterfieldDieselRepair4 ай бұрын
Thank you!
@marko11kram4 ай бұрын
Thanks for the tour!
@ButterfieldDieselRepair4 ай бұрын
Yessir thank you for watching 👍
@shaunmaxwell27454 ай бұрын
Get Tekton sockets to fill in. Way easier to warranty and easy to get individuals
@ButterfieldDieselRepair4 ай бұрын
I’ll look into it. Thank you Shaun!
@I_Died_2_Weeks_Ago4 ай бұрын
I just warrantied a broken hex socket with Sunex. It was similar as Tekton's warranty, except Sunex doesn't give up any type of confirmation after submitting the picture and info. It took about a week to show up.
@shaunmaxwell27454 ай бұрын
@@I_Died_2_Weeks_Ago yeah they are good too but Tekton does the two day shipping which is sweet
@DdHenley3074 ай бұрын
Looks like it has a hex end on it tho. Wrench and socket should also work
@ButterfieldDieselRepair4 ай бұрын
Yes that would also work as well
@user-gy9vp6qv2s4 ай бұрын
Damaged threads or maybe it could be the one time use nut
@mn4a154 ай бұрын
Very nice
@ButterfieldDieselRepair4 ай бұрын
Thank you!
@therealmillerman4 ай бұрын
Same exact box that I have. Even have the side cabinet. I put mine on the other end though. Looks good my man, enjoy.
@ButterfieldDieselRepair4 ай бұрын
Awesome man! Thought about switching mine to the other side.
@joenichols90124 ай бұрын
All the ball joints I have removed had a bolt with an opening for an Allen wrench. The use of an Allen wrench and a regular open ended wrench usually works.
@ButterfieldDieselRepair4 ай бұрын
I’ve done that a few times as well. It’s always good to have a few tricks you can use on something 👍
@tonydize39444 ай бұрын
To pros it doesn't mean anything but to the guys that we like to save a buck it means a lot 👏🏻👏🏻
@jonnysanchez38334 ай бұрын
Impact works great
@mn4a154 ай бұрын
Nice set up very nice color. You ever think about moving the side cabinet to the other side of the box so that it looks even and matches
@ButterfieldDieselRepair4 ай бұрын
Thanks for your comment. I’ve thought about it, might move it around in the future.
@tlc53434 ай бұрын
We’re mechanics. 99% don’t give a rats ass if the drawers “ wobble “ And the other 1% will gladly spend 6k on a toolbox just because they think it makes them a better mechanic
@ButterfieldDieselRepair4 ай бұрын
Well said, I agree 100%.
@theglobalistchannel14714 ай бұрын
I used long nose vise grips to hold the threads
@alanearnest60405 ай бұрын
For real
@dsnutzzz45675 ай бұрын
Or just use an impact been wrenching for a long time it always works
@ButterfieldDieselRepair5 ай бұрын
Impacts are great tools 👍
@hdcvospringer5 ай бұрын
Some ball joints have a slotted “bolt” so you can use a screwdriver to hold the ball joint while using a wrench
@ButterfieldDieselRepair5 ай бұрын
Yes! This one did, however I wanted to be able to show the pry bar trick. I appreciate the support
@davewallace82195 ай бұрын
Gump!!! Ura gott daaaamnd...gene yus!
@lukemcchesney67955 ай бұрын
Can you give me the link to the print you got
@ButterfieldDieselRepair5 ай бұрын
Just search “John Deere x750 Manual” on Google and you’ll see it.
@ryanbrasser9272Ай бұрын
Supposed to drain front transaxle fluid first and fill front first before doing the rear I believe.
@homesteadhaven20105 ай бұрын
Shouldnt reuse that nut.
@ButterfieldDieselRepair5 ай бұрын
Thank you for the input!
@wolleysegap97405 ай бұрын
The Series 2 was better than the 3 they have now.
@ButterfieldDieselRepair5 ай бұрын
I’ve heard very mixed reviews about the series 3. I’ve got a 72” coming in soon that I’ll be doing a review and comparison on.
@Dirtyrob5 ай бұрын
great video i have one its very handy, they have another that tracks shorts it works great u dont have to remove the plastic pieces to find the short
@ButterfieldDieselRepair5 ай бұрын
Yes I’ve seen that one, I’m looking to pick one up sometime soon! Handy for sure!
@MisterCybernaut5 ай бұрын
This is the unsolicited advice I'd always want. I hope this gets more views and reaches more people. Also, I really like how clean the loop is.
@ButterfieldDieselRepair5 ай бұрын
Thank you!
@dannybradley16735 ай бұрын
😊😊
@Martian745 ай бұрын
Are they the metric or imperial sized Torx bits?
@ButterfieldDieselRepair5 ай бұрын
I looked and couldn’t find out for sure, but I want to say they’re metric.