Love your tutorials thank you teach me alot! Been following for couple years
@ascreations66482 күн бұрын
Dou sell this mold .if so how do I get in touch
@Keysha1439 күн бұрын
Have you gotten to the point where you can just pull them out instead of unraveling them yet?
@CourtneyShavontae9 күн бұрын
No but that is my goal next time! I just discovered the method, but I haven’t tried it yet. 💜
@Keysha1435 күн бұрын
@CourtneyShavontae I'm trying it for the first time my next wash/retwist. I just figured out how to retwist/two strands and I'm feeling myself. I'm ready to try pipe cleaner curls and out of all the videos I've watched, yours helped me the most. Thank you so much! 🤗💜
@3Peat198816 күн бұрын
Nahhhh
@mcarlosfc20 күн бұрын
Full of microbubbles. The heatgun is great, but to remove bubbles on the surface level. With experience and good quality epoxy you tend to decrease drastically the bubbles, but indeed there is no better way than to get dedicated equipment (that is quite inexpensive nowadays at around 75 usd).
@reed1sam20 күн бұрын
thank you!
@Ariellableuhines22 күн бұрын
there are so cute
@saishadelahaze596622 күн бұрын
I seen this too late, i was adding things to my cart and wishlist & then it said the shop was closed. I ran here so fast for an update 😩😭 i can’t wait for you to revamp and come back sis but I truly wish you the absolute best and so much peace and blessings during your hiatus. 🫶🏽
@latenightcraftingwithstace300923 күн бұрын
HEY COURTNEY...PRETTY.
@latenightcraftingwithstace300924 күн бұрын
BEAUTIFUL.
@hempressdigital24 күн бұрын
Best of luck on the new chapter ❤
@Totandher4kids24 күн бұрын
The link to your vlog page says “unavailable”
@latenightcraftingwithstace300924 күн бұрын
HEY COURTNEY.
@latenightcraftingwithstace300924 күн бұрын
COURTNEY I WISH YOU ALL THE BEST. AND JUST KNOW THERE ARE A LOT OF PEOPLE THAT ROCK WITH YA.
@latenightcraftingwithstace300924 күн бұрын
COURTNEYYYYYY!!! NICE TO SEE YOU.
@trendsettaladi2224 күн бұрын
Dang it that’s before payday but I wish you peace and blessings sis
@musicsexlove24 күн бұрын
See you when you return! 💜
@hollyswanland26 күн бұрын
What alchohol do you use to get rid of the bubbles?
@Wallisersonne27 күн бұрын
Great video. I made my first project with epoxi. I learned a lot.but made a few mistakes. How to sand and polish epoxi. How to remove epoxi which overflow and is still on my.bottle openers?
@UnStod28 күн бұрын
You cut your working time all the way down when you do this😮 I don’t recommend this method doing big projects
@Tonya1016tatorАй бұрын
Where do you get your acrylic blanks from?
@jofish420Ай бұрын
Thanks for this vid! 💜☮ I did place mine with resin and it was not so good for me. I have switched to E6000. That works too, but I can move the sphere a little making me think it will fall off eventually. My prob with the resin is that I put it in after the sphere cured somewhat and I had a prob keeping the tip straight. I'm going to check out another glue today ans see if that works better. lols Love the flower ones!
@nene7544Ай бұрын
nice
@hazeb372Ай бұрын
Very nice🎉
@annmariedemarco466Ай бұрын
These dominoes are gorgeous! Thank yoh you for sharing this tutorial. ❤
@tejumadeadenuga6628Ай бұрын
Please where can I get resin materials in Lagos?
@logoRevealVideoHiveАй бұрын
How thick is the acrylic?
@deangelaritter3284Ай бұрын
That's lit 🎉🎉
@taallen334Ай бұрын
Is it possible to use liquid pigment as a substitute to alcohol inks?
@girlnextdoor2u4542 ай бұрын
😮 genius!! It’s gorgeous ❤
@JimCarlson-dg2kw2 ай бұрын
Love it Gods awesome
@girlnextdoor2u4542 ай бұрын
Love this!!! I just got this mold and I was looking for inspiration and found you 🙌 Can’t wait to get started ❤
@breau-ti-fulyoume61302 ай бұрын
💜💜💜💜💜💜💜💜
@breau-ti-fulyoume61302 ай бұрын
I have this same mold!! 💜💜💜💜💜💜💜💜💜💜
@foxxybrown82312 ай бұрын
Hi and good evening What is the name of this mold
@karenmclaughlan91282 ай бұрын
I wouldn't have the patience to allow each layer to cure for 12 hours. You could use a heat mat and each layer would be cured within a few hours
@lieutahwei4992 ай бұрын
The problem I see in this example is the low quantity you are using as an example. What if you have a huge project?
@georgianacairns1452 ай бұрын
Thank you these are so beautiful.
@beautycustomz2 ай бұрын
💜💜💜
@abenashairkitchen2 ай бұрын
It would've be nice if at least showed us how to do one, but it looks nice nonetheless
@musicsexlove2 ай бұрын
Love! I sent you a message on IG 🫣 how long did you wait for the first layer to cure before you poured the glow in the dark layer? 💜
@latenightcraftingwithstace30092 ай бұрын
HEY COURNEY IT'S BEEN A WHILE GOOD TO SEE YOU. BEAUTIFUL JOB AS ALWAYS.
@MakerAcreNinjaNetwork2 ай бұрын
Glad to see you back at it!! ❤🫂🙏🤘🎉 Another beautiful piece! Hope everything has been going great with your classes and life during your break!! ❤️🫂🙏🤞
@THEQUEENSAMPSON2 ай бұрын
Thanks for the video Queen. You don't disappoint, your work is fire.
@THEQUEENSAMPSON2 ай бұрын
I absolutely love your work Queen. Thanks for the inspiration.
@arrianagross32883 ай бұрын
Hey! Does the pipe cleaner method serve as a retwist or just a style? They look amazing!!!
@necoledingle33523 ай бұрын
Hay queen when will you post More
@Mommy27nikki3 ай бұрын
That looked so wonderful!!!!
@naturallynique40623 ай бұрын
I just need you to know your talent is out this world!! I always come to your videos for inspiration and motivation and you never fail!
@dreambailey13123 ай бұрын
That is so beautiful. Probably the most beautiful ashtray mold I have ever seen