I’m a diss jockey. I’ve never had a problem with this consul. The rane four it was my number one choice because it has the voiceover button on it and that was very important to me as a dish jockey nothing against you or anybody else in these comments but I don’t scratch so I don’t touch the jug. there’s a big difference between scratch DJs and dis jockeyyou’re probably a scratch me. I’m a jockey a diss jockey plays music blends songs, fades music in and out and doesn’t have any dead air except for when they talk again I’m not scratching, but it’s not my thing. Take care of everybody. Thank you for your sir.

I’m a diss jockey. I’ve never had a problem with this consul. The rane four it was my number one choice because it has the voiceover button on it and that was very important to me as a disjockey nothing against you or anybody else in these comments but I don’t scratch so I don’t touch the jog wheels there’s a big difference between scratch DJs and dis jockeys your probably a scratch dj me. I’m a dis jockey a dis jockey plays music blends songs, fades music in and out and doesn’t have any dead air except for when they talk again I’m not scratching, but it’s not my thing. Take care of everybody. Thank you for your video sir. Keep spinning keep making the people smile that’s what it’s all about.

My CHANNEL 1 & 2 WENT OUT SMH seem like a common problem

I just purchased the Rane 4 last week. It's still in the box. After seeing this video, im really debating if I want to keep it, or return it. I certainly don't want to have any platter issues like you did!

I was gonna buy this but seen this and other vids

I have the Rane One and its new with volume issues and the Right side platter speeds up on its own .

would love this but i might wait for a better version :D this has too many flaws as i read

Nice song selection

To take your iPhone off Simply sign out on your Mac -Dj swagg

❤❤❤miss ya😊

Hey DJ IamD I saw one of your old videos that say you were having issues with Rane MK2 it was helicoptering. I had same issues how did u resolve it Thanks

👠👠❤💣🎼🎧♨️

Ok bro I see you

❤❤❤❤🎉🎉🎉🎉🎼👠👠✌️♥️🎧

Rane 4 is trash.

So glad I saw these videos. Was about to buy this online. Going back to Pioneer. Rane already robbed me $2100 on the Rane 68 only to stop supporting it. Garbage company now. I’m selling all the gear I have left and going with Pioneer. Done

Was super excited to buy this unit. After reading all the comments and finding so many folks complaining about it, I have decided to go to Pioneer. Rane already screwed me over $2100 with the: Rane 68. They literally stole my money. I am not spending another dime on RANE.

Just got my rains in the mail. No issues yet …

kzfaq.info/get/bejne/a82Bo7WbzcmYiWw.htmlsi=xZnMBqsaSTa0GMd4

Firstly, try it with a Windows laptop 💻 because the same issue occurred when I was using the Pioneer DDJ SX3. When I used my Windows laptop, everything worked without any issues. However, when I went back to my MacBook Pro, the issues returned. What I did to resolve the issues was to reduce the sensitivity of the platters. Since I reduced the sensitivity of the platters, my Pioneer DDJ SX3 has been working fine till today. If you try the same method with the Rane 4, it might work.

Ok if you want to fix the issue it’s a ground problem inside the unit I have fixed mine works just like new no issues at all

My faders on the rane one are bleeding music, to change the it's a nightmare. Don't buy Rane

These rane products have cheap numark parts stick to pioneer

Question how did you get you Rand four to connect to serato dj pro mine will connect an disappear anything else I could do

I just got the updated rane four mines working excellent i waited for mines because these are man made its always room for flaws even in human beings 😂

Ok I think I found the issues it’s a ground problem inside the way they try to ground the circuit boards You have to open it up to see what I have found out it’s poor engineering.They have the power ground wire going screwed on the bottom plate then under that same cover there are places that were bare metal to ground the circuit boards. I have already taken it apart and cleaned all metal contact places it has definitely improved the problem I had ,when slowing down or speeding up the side of the platter the platter would act like I had my hand on top it now does not do it but a few times in one hour testing , but it’s not 100 percent. I’m going to run small wires to where it needs to be grounded better as I pretty sure that’s the issue. I’m not able to send it back due to where I live and where it came from so I’m trying to solve this on my own.

Stop saying "um" and smacking your lips, the most annoying shit ever.

Noticed when you touch the platter your mic or audio buzzes. Sounds like bad grounding

Wow!!! Thanks for the video and I hope you got a refund on the Rane 4!!

what

I've been on my DDJSZ for 10 years now and it's never been fixed. #pioneer #legendary 😎

gwan bruudda

That's too bad. I would sell all that shit and get either 2 CDJ3000's or 2 SC6000M's and a used Pioneer s11 mixer. Used, i would get 2 CDJ2000Nexus or two SC5000M Denons

U didn’t problem shoot anything ! Bad video

Try changing the power cable? This sounds like a grounding or issue with your outlet/power strip?

I'm so glad you did this cause I have issues with the MK12 did you get that issue fixed and how. We pay too much money to go through this.They need to recall them all back and fix the issues or give us something that doesn't have issues . Work too hard for this

Thank you bro ain't going nowhere near this shit now , I suppose us real djs the ones that scratch n cut need the technics 1200 mk2 a proper turntable thank god a own them sync beat djs be like its cool i can still use it lol Thank you bro 🙏

damn, 4th exchanged unit? and out of all of them, the B-stock is the one that's not experiencing problems?!

My Rane 4 the left platter if I try to slow it down it acts like I touched the top of it and did a backspin wtf

I just purchased the Rane Four and after two days of ownership Im experiencing the exact same issue. I thought I was just cuttin & scratchin too much. I'm disappointed after having such anticipation, now I have to go thru the whole return process for a replacement. This suckxz lol!!

No good

You got a bum unit

Yea my Rane right jog wheel has the same issue, I really love the unit. It is built like a tank but I have to send it back.

Update 12-01-23 The Rane Four with the orange buttons have the same issue with the left platter slipping I sent the unit into Rane and I’m still waiting on an update from them. I’ve shot them a couple emails but Rane is not responding back. I bought this unit back in April and we’re in Dec now and I have not had a unit that worked properly. The multiple replacement units that they sent had the same issue. and was returned for another defective Rane Four as Dec 1st 2023 I don’t have a Rane Four Rane has it I have lost money by not being able to do events if I do not hear back from Rane sometime next week i’m going to file a lawsuit against the company for selling me a lemon product I will update what happens

Wow all this money for a player to be defective

It’s ur usb cable ?

Still using an NS7 10 years on. Reliable as. Ever since InMusic brought these brands Reliability has gone out the window. I’m getting a pioneer rev 7

old numark ns7 still my go to =/ sorry

Which pioneer is best to buy