Can't thank you enough for your "how to" video. I literally just finished updating my salt diagnostics thanks to you sharing your knowledge. Much appreciated sir, now I'm going in my pool with no worries! Have a great day, you just made mine better!
@teddywilliamson35473 күн бұрын
Can you use the cell with this control panel?
@JJ-fg4wp8 күн бұрын
i am having issues with my hayward aquarite system. The only light I see green is power. I tried to recalibrate it by turning it off then on, like in your video and no change. The numbers on the screen do not move, unless I hit the diagnostic button. Had my sat cell tested and no issues. My water can't hold free chlorine. About 31,000 gallons and I have been adding a case of shock every week and within 3 days, 0 FC. I tried to locate the T on my screen and it is no where to be found. I am using the T15. I get my water tested and the salt is within the range. How do I know if my mother board is bad or is it is the entire Hayward system?
@giannout116 күн бұрын
alot of times the instant salt read shows zero, but the first average number has a reading , any thoughts?
@backyardfunpoolsinc.823615 күн бұрын
Instant salt reading will only be higher if you are in generating mode. The best way to test this is to go into super chlorinate and then back to auto and it should change the instantaneous.
@Tossle17 күн бұрын
Wow this video not only schooled me on my system,but helped me toggle back to the correct t cell which was causing errors. Thanks!
@backyardfunpoolsinc.823615 күн бұрын
Yay! Glad we could help!
@barbiepeacock995218 күн бұрын
EXCELLENT video for the the DIY pool owner. Thank you!
@Withjesusforever77721 күн бұрын
How’s the salt cell going for you
@imbabythecat23 күн бұрын
So we still add a bag of shock every week, too?
@backyardfunpoolsinc.823620 күн бұрын
No you should not do both
@imbabythecat23 күн бұрын
Thank you for the tutorial! You make pool care easy!
@JerryRuffino-uh6li25 күн бұрын
Hi just put in aquarite salt I think I put too much salt. I tested it reading 5700 ppm how should I get down to 3200?
@backyardfunpoolsinc.823620 күн бұрын
Make sure you have the correct salt cell marked in your aqua Wright system. It is the last setting you need to check. Sounds like you have it set on too small of a salt cell.
@JerryRuffino-uh6li20 күн бұрын
Thank you I have tcell 9 it's going down slowly . I'm just hoping no damage for it reading high.
@00jlove26 күн бұрын
Hello, Can this controller also control a waterfall inside of the pool
@backyardfunpoolsinc.823620 күн бұрын
No. Only salt system
@willieowens6978Ай бұрын
My son has a light on for check cell not flashing solid light and has digital readout is 1400 salt level but we had it checked and it’s actually 2900. Not quite sure what it could be could be bad.
@backyardfunpoolsinc.823620 күн бұрын
Sounds like a bad salt cell.
@sinmaan7568Ай бұрын
Very useful! Couple questions...what is the default value of the diagnosis screen? 3200 in your case. Desired salt level? Also, if i cant get to the cell type on my diagnosis screen, does it mean my cell is dead?
@dollydavis6748Ай бұрын
My inspect cell and low salt are on steady no flashing the chlorine reads 300 at the display but the pool store registers it at 3500. can you give me any clues to help fix please?
@backyardfunpoolsinc.8236Ай бұрын
I would begin by checking that the cell size is correct matching between the box and cell. If that is correct it sounds like you could have a bad cell. 🥴
@juanlahera2740Ай бұрын
I cannot get to the inst read for the salt level. I don't get the minus sign
@backyardfunpoolsinc.8236Ай бұрын
You have to go up into super chlorinate mode. Wait for a click and then back to auto. That should give you your instant salt reading. Make sure you go to the first salt reading before going into super chlorinate or you will put your system in metric.
@KoriDegner-hj6vxАй бұрын
Can u use the generator still if ur using chlorine tablets and not salt?
@backyardfunpoolsinc.8236Ай бұрын
No. You need salt to make chlorine
@KoriDegner-hj6vxАй бұрын
Thanks great video I watch it once a year
@gaetanst-georges5873Ай бұрын
I have an Aube T1040 industrial timer. I plan to cut the power on my pump motor at night. Is it safe if my Aqua Rite Hayward T-15 stay on during this period of time. Usely, if the water stop running in the cell, the no flow light will get on and the cell will stop the chlorination.
@backyardfunpoolsinc.8236Ай бұрын
I am not the manufacturer. I would check with Hayward.
@edflores33692 ай бұрын
Great Video. Thanks for the help.
@backyardfunpoolsinc.82365 күн бұрын
Glad it helped
@Vunderbread2 ай бұрын
Thanks. I was scratching my head, thinking the AL symbol was a funny way of meaning Alkalinity, i.e. sodium bicarbonate. "Zero? That can't be..."
@joshlodder86082 ай бұрын
Thanks for this video.
@JeanBenoitFOURNIER2 ай бұрын
Nice. Well done. That does it for me
@backyardfunpoolsinc.82362 ай бұрын
Thanks 👍
@marilynpetersen91152 ай бұрын
Great Info and well presented!
@backyardfunpoolsinc.82362 ай бұрын
Glad you enjoyed it!
@goodcitizen45872 ай бұрын
Very useful. Thanks!
@M0DeLcH1cK2 ай бұрын
What does a solid inspect cell and solid check salt light mean?
@backyardfunpoolsinc.82362 ай бұрын
It does this every 500 hours. Just hold the diagnostic button for 30 seconds to reset!
@bitterrotten3 ай бұрын
No criticism to you but it is pretty disgusting of Hayward to design an interface with a single button and a quad 7 segment display like it's the 1980s and then charge 1.5 thousand dollars for it.
@backyardfunpoolsinc.82362 ай бұрын
You should check out their new system. We are releasing a video soon. It’s the S340 salt system. Only can purchase through a dealer
@timmarler65723 ай бұрын
Awesome video ! Very , very well done. True professional !
@backyardfunpoolsinc.82362 ай бұрын
Thank you very much!
@jmattox80413 ай бұрын
THANK YOU! Best instructional video I have found about how to use my salt system!! Thanks!😄
@backyardfunpoolsinc.82363 ай бұрын
Glad it was helpful!
@NOBSBOURBON4 ай бұрын
Just moved into a new place with a salt water pool and have an Aquarite generator. So the power indicator is only on when the filter pump is on. Is this correct? I read somewhere that this is how it should work as opposed to being “always on”.
@backyardfunpoolsinc.82363 ай бұрын
If on same breaker this is correct
@patti45fas4 ай бұрын
Thank you
@backyardfunpoolsinc.82363 ай бұрын
You're welcome
@danielchavez60906 ай бұрын
What is the revision number? Is it the same as VERSION Software? Thank you!
@backyardfunpoolsinc.82362 ай бұрын
Correct.
@ChristIsRisen7777 ай бұрын
Well taught, sir! 👏🏽👏🏽👏🏽
@backyardfunpoolsinc.82363 ай бұрын
Thank you kindly
@danielnixon633110 ай бұрын
Thanks for the great video
@backyardfunpoolsinc.82367 ай бұрын
Glad you enjoyed it
@DIYKAI10 ай бұрын
Still relevant in 2023
@backyardfunpoolsinc.82367 ай бұрын
Plan to make a new video soon on the update S340 model. Be on the look out!
@DIYKAI7 ай бұрын
@@backyardfunpoolsinc.8236 we actually repaired this unit on a rental, and we got a different more serviceable brand for our home lol
@loschismesdelasredes26122 ай бұрын
@@backyardfunpoolsinc.8236 yes please
@garyweaver6342 ай бұрын
Just installed a new salt cell but even following your video the check cell light stays on ??
@allisontaylor15410 ай бұрын
What is the panel lights go out ? But pool filter is still running ?
@backyardfunpoolsinc.82367 ай бұрын
Sounds like a bad front board or back board. If your display screen is still working it is a back board issue. The system will not continue to produce chlorine
@Shortwheels31611 ай бұрын
Nope doesn't work. Even replacing with a brand new cell. POS still doesn't read right
@backyardfunpoolsinc.82367 ай бұрын
Is it on the correct cell setting?
@cruiez200811 ай бұрын
Great video. Learned a lot.
@backyardfunpoolsinc.82367 ай бұрын
Glad it was helpful!
@thomass442211 ай бұрын
Great video. Nice of you to take your time
@backyardfunpoolsinc.82367 ай бұрын
Thanks for watching!
@nourjalal758311 ай бұрын
Thank you
@backyardfunpoolsinc.82367 ай бұрын
Welcome!
@miamicyclist0111 ай бұрын
Great video everything was explained in a very non technical way and was easy to understand.
@backyardfunpoolsinc.82367 ай бұрын
Thanks for watching!
@jimboyko2854 Жыл бұрын
My goodness, what a great / beautiful job . Thank you so much.
@backyardfunpoolsinc.82367 ай бұрын
Thank you so much!
@user-cw5ld9wb6b Жыл бұрын
I have a salt pool and the panel is showing 0000 salt reading. I cleaned my cell and still 0000 salt read out. I normally have it telling me 2800 to 3400. Is this telling me my cell is not working. Could it be a panel issue. The yelllow light is on.
@backyardfunpoolsinc.82367 ай бұрын
Sounds like a cell issue as long as the no flow light isn’t lit up.
@dominickbarbera3622 Жыл бұрын
My acquarite control panel is set to the hi salt reading on then goes to 1900. I TGEN SET IT TO 3400 AND IT RETURNS TO 1900. SALINITY TESTER READS 5209. I KEEP TAKING 3-4 INCHES OG WATER OUT AT A TIME. BUT IT STILL DOESENT RECALIBRATE. COULD IT BE 1 OF TGE C URCUIT BOARDS
@backyardfunpoolsinc.82367 ай бұрын
Sounds like high salt. I would double check you have the correct salt cell setting in place. If you do then make sure to pump out from main drain in bottom or to place a pump. When lowering salt you want bottom water not top.
@georgiafatboymowingandtrac7293 Жыл бұрын
Just a quick note to let you know how much I really appreciate this video. I have always had a pool company taken care of my pool equipment until this year. I am now learning how to take care of it. This video has been extremely informational and allowing me to take care of this pool myself. Again, thank you so much!
@backyardfunpoolsinc.82367 ай бұрын
Glad I could help!
@jeremythompson0306 Жыл бұрын
Thanks.!!
@backyardfunpoolsinc.82367 ай бұрын
Welcome!
@josiederting3416 Жыл бұрын
agree with recent posts. I FINALLY GET IT.
@backyardfunpoolsinc.82363 ай бұрын
Thanks
@AlMiller100 Жыл бұрын
I have an AquaRite 900 system. The salt water cell (turbo) says TCELL 925. Is that considered a T-cell 9?
@backyardfunpoolsinc.82367 ай бұрын
Yes. 925 is 9 and 940 is 15
@user-gp8iv5sl1f Жыл бұрын
Thank you for providing this clear overview - very helpful
@backyardfunpoolsinc.82367 ай бұрын
You're very welcome!
@ingridvelez9043 Жыл бұрын
When I put the pool in the shocking mode . After the 24 hours can be used or we have to wait another 24 hours?
@backyardfunpoolsinc.82367 ай бұрын
It should be safe to swim as long as you have a balanced pool.
@jgd0068 Жыл бұрын
What are the the revision numbers?
@KOLE1218 Жыл бұрын
My generator is not generating chlorine and the lights that are on are power, super chorlinate, check salt and inspect cell. I tried turning the system off but the generating light won’t turn on. How could I fix this?
@backyardfunpoolsinc.82367 ай бұрын
Generating light is only on when the cell is actually generating. To test this. Turn your cell to 100% and it should kick on to generating.