Why did they stop production of the 210mp is the 215mpi a better machine?
@1970chevelle39611 сағат бұрын
The 215 is very similar to the 210. It has the same output. But it has a few improvements over the 210. That’s why they stopped making the 210.
@mariomendez9950Күн бұрын
how does it hold up with 6010 5p and root penetrations
@1970chevelle39612 сағат бұрын
I’m not sure since I hardly ever stick weld anymore.
@mariomendez995010 сағат бұрын
@@1970chevelle396 ok i see, well appreciate your feedback man
@coleebright8487Күн бұрын
I am a welder and my advice is keep at it and I wouldn’t weave like at all the less you weave the cleaner and more penetration your weld will have a lot of schools will tell you to weave but in the real world less weave is better but most importantly keep practicing!!
@sccolbert6 күн бұрын
Who makes the line-con welders?
@1970chevelle3966 күн бұрын
Lincoln makes them
@_CAT-lg4sr7 күн бұрын
You're a good man who did a good job. Your customer is lucky to have you.
@1970chevelle3967 күн бұрын
Thanks
@mds63878 күн бұрын
Yes, the raincheck option is only offered when a HF employee is asked about it. I've learned about that option years ago. And yes, you are correct, they do not openly advertise or offer rain check coupons. The rain check coupons are only used for discouraging customer disputes to maintain a healthy relationship with the costumers. To be honest, HF has an excellent reputation with customer satisfaction. Hell, most of the employees will just give the pertinent coupon at the counter if you even mention it.
@Tiebox15 күн бұрын
Surface conditioning tool; cool! I wish the lasers would come down in price dude! At $2500+ I can't justify it for personal use. Thanks for the video. Love that thick welding table! Looks like you've used it a few times ;)
@1970chevelle39615 күн бұрын
Thanks. I built the welding table 12 years ago.
@Tiebox15 күн бұрын
@@1970chevelle396 I'd love to build one, but it will have to wait with the bogus Bidenomics going on right now. Hopefully that son of a bitch loses the election.
@6gatornation19 күн бұрын
looks like the pieces that contact the spring woujd scratch the powder coat
@trev77920 күн бұрын
Does the gasket sealant prevent coolant from getting into pistons?
@16vjohnny20 күн бұрын
Dude sounds like Jeff Daniels.
@miztrusa20 күн бұрын
I have one similar but my links attach to the outside of the sway bar. I really like the adjustability because I'll be putting in an Icon expansion pack which adds a little over an in and in thier instructions it clearly states will not work with Tundra rear sway bar but mine can stay because I can add whatever height I achieve with pack to the sway bar links. Very nice to have.
@kylestokes450120 күн бұрын
I rented one of these at Denver, CO to drive to Loveland, it had 23,000 +\- miles on it. I started smelling a “candle wax” smell, and then, on the icy interstate, the coolant level alarm came on, and just in the short moments it took to try to get pulled over, an engine temp alarm came on. I called Enterprise, and I overheard “Well there goes the last of the Cruze Fleet.”
@chrisisho255728 күн бұрын
Normal smoke comes out from Dipstick when pull it out ?
@1970chevelle39628 күн бұрын
Yes. It will normally get into the crankcase .
@sandwonАй бұрын
Great improvements 👍
@1970chevelle396Ай бұрын
Thanks
@AllHandlesHaveBeenTakenАй бұрын
There are 10 million hoses. How to find the right hose to connect?
@1970chevelle396Ай бұрын
The best hose to use is the hose that goes to the brake booster. But you can use any vacuum hose that goes to the intake manifold.
@corey5291Ай бұрын
I have had 10 years of success with rockauto and this last order just went to shit and still no customer service lol wtf
@Cokie907Ай бұрын
Luckier than most. I went about 3 years (4 parts orders).
@MarkicjuszАй бұрын
Nice, solid jack stands😉
@magdielsuarez7800Ай бұрын
❤
@choryswiat5944Ай бұрын
would be easier and cheaper to buy better press
@1970chevelle396Ай бұрын
But I already had that press and I have the time.
@TechThisytАй бұрын
Does it work for other scan tools? I have a launch branded scan tool
@1970chevelle396Ай бұрын
I don’t think it will work for other scan tools
@RoddyDaАй бұрын
Is $500 for an M22 a good buy?
@1970chevelle396Ай бұрын
Thats a very good price
@BOSCH-sp8fzАй бұрын
will it work on 2010 Acura tl
@1970chevelle396Ай бұрын
Yes it will work
@RCKYOTAАй бұрын
Great video. Just got the same setup thanks !
@1970chevelle396Ай бұрын
Thanks
@RoadHead62Ай бұрын
I did the same thing, but on the spring loaded cover you cut with a dremel, I just drilled and tapped a hole perpendicular to the collar, depressed the collar then tightened the bolt holding in out of the way. A lathe handle with three set screws for the shaft snugged up on the 9/16 hex drive shaft perfectly.
@jthebird0280Ай бұрын
Great video! Do I add the stabilizer to the gas when it’s in the generator? Or when it’s in my gas can? Thank you.
@1970chevelle396Ай бұрын
It’s best to do that when it’s in the gas can. Then you will know exactly how much to add.
@B.I.-EIO_macdonald9786Ай бұрын
Whats the code P399?
@JoseMolina-ft1lrАй бұрын
Good afternoon i have a 2012 honda civic gx CNG that won’t start. I would like to know if you have a mechanic shop and where it is located or a way to contact you personally.
@JoseMolina-ft1lrАй бұрын
Good afternoon i have a 2012 honda civic gx CNG that won’t start. I would like to know if you have a mechanic shop and where it is located or a way to contact you personally.
@JoseMolina-ft1lrАй бұрын
Good afternoon i have a 2012 honda civic gx CNG that won’t start. I would like to know if you have a mechanic shop and where it is located or a way to contact you personally.
@1970chevelle396Ай бұрын
I’m in Northern California
@COM70Ай бұрын
That drill says Milwaukee but the castings and design look like Rotabroach.
@NatvBearHntrАй бұрын
Did you ever make the video showing how you powered the welder with your generator?
@@1970chevelle396 Thank you. I didn’t realize it was under the Predator review. I have the same Honda generator and was looking for that.
@libradosalinas7887Ай бұрын
So you only need a 20 amp breaker what gauge of wire
@1970chevelle396Ай бұрын
Yes you only need a 20amp breaker. 12 gauge wire
@libradosalinas7887Ай бұрын
Thank you
@InvaderZim_Ай бұрын
Just changed out mine thanks to this video.
@1970chevelle396Ай бұрын
Thanks
@clintchapman4319Ай бұрын
Niiice!
@1970chevelle396Ай бұрын
Thanks
@TheRealMisterChopShop2 ай бұрын
Great tutorial even better welder pretty nice. I wish I could test it out.❤
@1970chevelle396Ай бұрын
Thanks
@mycat8urskidoo2 ай бұрын
Still working well, looking into this generator to go mobile welding wise, have a non inverter generator now, but worried about burning up my machines
@1970chevelle396Ай бұрын
I bought it for the same reason. I didn’t want to use my non inverter generator on the inverter welders and plasma cutters.
@eladiogarcia41512 ай бұрын
Can you run this machine with a 9500 amps generator?
@1970chevelle3962 ай бұрын
Yes
@MickyBellRoberts2 ай бұрын
Good Friday morning to you, I saw you on Rusty Glovebox so decided to take a look. I really like what I see so have just subscribed to your channel. It is nice making new friends.
@2ssrs9502 ай бұрын
Converting a Camaro from manual to auto should be illegal 😂😂
@clarence-fw7wr2 ай бұрын
I used to use rock auto all the time but now I find it's cheaper too buy local because the part at Rock auto may be $10 but too get it to your door even if the part weighs next too nothing it could be almost $40, so most of the time no it's cheaper to buy the part where I live sometimes maybe spend $5 more locally and get it the SAME DAY! Rock auto has great prices but they are taking themselves out with sky high shipping prices, so for me, I opt out. I know that's where they make their money but it seems that Rock Auto is loosing their way and getting greedy.
@kevinshaw39792 ай бұрын
Will it fit a LN25 suit case I wonder ?
@1970chevelle3962 ай бұрын
You would have to go on Lincoln Electric’s website and see if it works for your welder
@joehyundaitech79612 ай бұрын
the only thing that they have that I have not seen with any other online auto parts store is they accept a e-check on their site as payment this is if you don't want to use your cc it does come in very handy when you are maxed out on your cc
@joehyundaitech79612 ай бұрын
the parts are cheap but they make up for it in the shipping I have seen the shipping cost be more then the parts cost I was going to by wiper blades from them they were a very low price like 10 bucks but after you put your zip code in you get your total price and it brought the final price to over 40 bucks I was like WTF sorry I bought them from another site instead for 20 bucks no shipping and it was a set of two
@royanderson34782 ай бұрын
Rare ? Desirable? What yrs , what models. Thanks
@1970chevelle3962 ай бұрын
In California the engine model numbers have to be correct for the vehicle to have the emissions test done.
@teddysharkey85952 ай бұрын
What tools do you need to pull the valve cover?
@1970chevelle3962 ай бұрын
External torx sockets
@omahaL982 ай бұрын
Great video of showing the highlights of remove and install and issues, great video.
@1970chevelle3962 ай бұрын
Thanks
@lesflo72312 ай бұрын
only with receipt? and does it need to be the store the tool was purchased from?
@1970chevelle3962 ай бұрын
No you don’t need a receipt. I made 5 trips to two different stores. Since i had so much stuff to return. First thing they asked for was a receipt. Then I told them Craftsman is lifetime warranty. Then they exchanged everything without a receipt
@f2968772 ай бұрын
Great video thanks!
@1970chevelle3962 ай бұрын
Thanks
@davidmartin78852 ай бұрын
I have a 1997 ford f150 and I have oil getting in the 3&4 cylinder what do you think causes that
@1970chevelle3962 ай бұрын
It’s probably a blown head gasket between those 2 cylinders
@1970chevelle3962 ай бұрын
Are you positive it’s oil.
@davidmartin78852 ай бұрын
@@1970chevelle396 I can guarantee it
@1970chevelle3962 ай бұрын
It’s very odd because both cylinders are right next to each other. Did you do a compression test and a leak down test?
@davidmartin78852 ай бұрын
@@1970chevelle396 no I haven’t what would that tell me
@jouseff_12932 ай бұрын
ive never had a problem with rockauto and ive ordered multiple big suspension kits for my vehicles, were talking about struts, full bushing sets (INDIVIDUALLY BOXED), control arms, never had a problem when shipping and with them handing over the wrong part, there was a time that when i worked for an autoparts store they made a mistake in ALMOST shipping the wrong part for a customer, but they cancelled it themselves, only thing is that they didnt let me know haha, but never ever had a problem with them sending the wrong part....