What plant did you use to paint the fuel cell? Thing looks great
@atlasvltor726023 күн бұрын
Nice fuel cell painting and decorate!!
@Tobey74528 күн бұрын
I was about to say "oh you little one" when thinking about Subaru vs Group B cars, but i understand you its where you come from. Great video! :)
@TekinRacing18 күн бұрын
I LOVE Group B cars too! I'm just a glutton for blow head gaskets lolz
@bazzani2129 күн бұрын
Holy cow, been so long I forgot this channel existed!
@TekinRacing18 күн бұрын
Me too! LOL
@MisterTonky29 күн бұрын
you gonna finally finish the bronco? :P
@TekinRacing18 күн бұрын
I kinda did and filmed a bit, but I just haven't had much time for videos the last year or so. Trying to get back at it.
@kspectre21Ай бұрын
More builds for 2024? 👀
@TekinRacing18 күн бұрын
I have a few sitting here, just need to find the time to get after them.
@kspectre2118 күн бұрын
@@TekinRacing thanks for the response and I hope you get a chance when life isn't too hectic other, I really enjoyed following along with them :)
@jedediahsmart569Ай бұрын
Is there a way to take the settings from one ESC I have and clone them to another ESC?
@TekinRacingАй бұрын
On a PC, yes there is! Simply connect to the ESC your setup is in, and hit Export Setup. That will let you save off the ESC profile, then you can connect the other ESC, hit Load Setup and import that file. There are videos on saving: kzfaq.info/get/bejne/opmRm7113p-oe4k.htmlsi=smCJJ98NqdbiO2z3 And Loading: kzfaq.info/get/bejne/h9SUa9idt6fXoHU.htmlsi=TcP1c-2MlpfOshu3
@antonroux6737Ай бұрын
Can you buy these??
@TekinRacingАй бұрын
Not right now, these trucks were custom made here in the shop.
@antonroux6737Ай бұрын
Is it possible to buy one of these??
@ezrakuperАй бұрын
Great video. Building mine now. On the front assembly, the gearing doesn't turn as smooth as the rear; there's a bit more resistance. I backed out the screws a tad and the same issue. Any ideas? My next step it to take it apart but i'm not looking forward to that!
@TekinRacingАй бұрын
Diff gears or the pinion/ring? Likely just a mesh issue, if it's on the tight side but not locking up at all I'd run it once or twice and see if it's loosened up.
@hollywoodpaid772 ай бұрын
How can I get a tune
@reezoshideout2 ай бұрын
Great video, I am currently preparing a new "long trail" build and it will have a 412 or 412HD. What rig is the one in the first shot? With the Tekin logos on the sides and the spare wheel. It looks awesome!
@Pswans5092 ай бұрын
No way awesome!
@Pswans5092 ай бұрын
Great info thanks
@gweepgweep87292 ай бұрын
The problem is, when you look at the parts it looks like toy, but Tamiya makes a good job to give you the feeling of "realistic" what you see with a nice body but also with the nice driving handling. For me I don"t need much speed (That is why I like heavy and big Crawler also), that is stressful not relax with my hobby. The second part is, Tamiya gives me more the freeling to handcraft something on the car. The price is ok so you can also experiment with the parts to cut off something or what ever. And there are Tamiya Cups with rules that everyone can drive races ... I like that.
@steeltx3 ай бұрын
Thanks Ty. Sounds like a 3D printer running in the background audio....
@sanchoancho65104 ай бұрын
In 2024 this video still kicks a$$ and so does the VP Origin!!!!!
@davidparrajimenez80795 ай бұрын
Wow Awesome!
@luisrios40176 ай бұрын
Are you guys going to update the app for the hotwire 3.0. It won't support the new version of Android. I purchased it and can't use it
@TekinRacing6 ай бұрын
It's being worked on right now. Update to 13 went smooth and is in Beta, now working on 14. It currently runs on 14, but some phones won't allow it to be downloaded.
@luisrios40176 ай бұрын
@TekinRacing exactly. In my phone whitch is a Samsung s23 on 14 it won't let me download. But thanks for the update, hope it gets resolved.
@TekinRacing6 ай бұрын
It will be, we have to constantly chase changes they make on new OS and phones.
@themexicanmarauder126 ай бұрын
Do you remember the paint you used for the body?
@TekinRacing6 ай бұрын
PS-19 Camel Yellow is the base coat, backed with white then black.
@stuartmaddaford35796 ай бұрын
What transmitter are you using
@TekinRacing6 ай бұрын
Spektrum DX5 Pro
@jefflawhorn60136 ай бұрын
You guys still have this rig?
@TekinRacing6 ай бұрын
Sure do!!
@allscalerc6 ай бұрын
Wow amazing build! I need one!
@daveshvacplumbing19747 ай бұрын
What battery was that
@TekinRacing7 ай бұрын
We have our own line of batteries now, I am running our Titanium 5600 Shorty pack now. We also have a Graphene HV 6300 Shorty, both of those would be great choices.
@daveshvacplumbing19747 ай бұрын
@@TekinRacing thank you!
@that1mower7 ай бұрын
What rear bumber is that. Ive been looking for the file
@TekinRacing7 ай бұрын
I want to say Turbotech or something like that, been awhile since I've dug through the mods.
@Owen4857 ай бұрын
Where did you get it and how much was it because I’m looking for one
@TekinRacing7 ай бұрын
I bought the file set and printed it, but there are authorized sellers that do kits for about $300 and then add your electronics.
@minimumcorpse49227 ай бұрын
I lived north east of America all my life and never thought of rc ski mobiles this is my next rc
@edwincordero88 ай бұрын
That motor is 540 or 550?
@TekinRacing8 ай бұрын
540 size, the HD are just barely too long and are honestly more power than needed and also heavier.
@enricomiceli55178 ай бұрын
Is not either the oil or the suapension stiff, is the shock mount, tt01 and tt02 have a far shorter distance between shock tower and arms and far less adjustment compared to the xv01 this reduce signifcally the shocks run and make the car very reactive and stiff to unheven surface compared to the soft and stable action u have in a rally car. Huge upgrade wluld be a carbo or meta shock towmer front nad rear to allow more adjustability. For the rest tt02 is a very good rally platform , u can also either put som potty or sikicon glue under the steering linkage to avoid stone and dirt to get trapped in the bathtub or use the xv01t method and put some holes there.
@TekinRacing8 ай бұрын
Suspension being stiff is a lot of it. Longer travel only works if the axles and the rest of the suspension arms can handle it and the TT-02 is fairly limited in physical travel, thus the mods I did.
@scaleworksRC8 ай бұрын
Nice build and shots, man!
@TekinRacing8 ай бұрын
Thanks!!
@Demolishor178 ай бұрын
put on some weight for the front wheel
@TekinRacing8 ай бұрын
I never add weight to my rigs. Just needs some rear link tuning.
@paulguerrero9728 ай бұрын
Wow!!! Thats a great esc!!! I might have to get one.....now what to do with the rest of my RX8 Gen 2's.....
@TekinRacing8 ай бұрын
The RX8 can be setup the same actually!
@zoridor168 ай бұрын
Mi è piaciuto il risultato finale (e quello che mi è piaciuto di più è che ha una buona altezza dal telaio al suolo) i sassolini non graffieranno il telaio così facilmente) Saluti
@pieroges8 ай бұрын
Really nice Subaru built. By the way what brand are those two trucks on the shelf. Thanks
@TekinRacing8 ай бұрын
They are custom 3D printed builds.
@STP_RIDGELINE8 ай бұрын
🔥🔥🔥🔥🔥🔥🔥🔥🔥💯💯💯💯💯💯💯💯
@562whisperloc8 ай бұрын
Just bought mine because of this video cant wait to gather all the upgrades and get started 😎
@TekinRacing8 ай бұрын
Definitely using different shocks next time, the off-road versions are the way to go!
@Ozzy33333338 ай бұрын
Back in the day on my Futaba 3PJ Tx (with funnies), I had two thumb buttons on the thro hand to bump the neutral position up a step at a time, I would use this if it was getting loose into the turns, it was a secret weapon. I ran on-road for 2+ decades (I ran some dirt, but it felt like I was constantly trying to get back on the line), ran mostly Tekin after Novak screwed me over on smoking esc's. Kevin helped me out at the 1996 worlds at Revelation's with a G9 esc.
@dennpeetv83898 ай бұрын
Hi Tekin racing, i just wanna ask, I downloaded the software but it's not letting me to install it. I don't know what to do anymore.
The TT-02 might not be the best RC rally Car but its very versatile, cheap to own an maintain. TAMIYA Bodies are very detailed and look gorgeous once painted correctly, and to be honest and in the TT-02 defense, if you think in scale, those tiny rocks may look tiny for us but for the TT-02 it was like were running it on rocks as big as a car door😂 some fine dirt is the ideal terrain for it.
@TekinRacing8 ай бұрын
For sure! It was a fun build.
@oi39 ай бұрын
very good big liked
@oi39 ай бұрын
hi what tint did u used? name and serie?
@TekinRacing8 ай бұрын
The Tamiya PS31 smoke.
@the.just.able.biker679 ай бұрын
I know im late to the party, but that thing is frikin awesome!! 👍 Ive just got into RC crawlers and i bought a 1/18 ftx unitrak. Its got a unimog style cab. I thought that'd look good with a scratch built Dakar truck style rear end. Your truck has given me so many ideas about styling it. 👍
@nsbob709 ай бұрын
Thanks man! Just jumped on to refresh my memory. Needed some more brake on my Losi 8ight-B 2.0 conversion! ;)
@markbrown99759 ай бұрын
Do you have a list of the option parts used? Example - Fuel cell cover?
@TekinRacing8 ай бұрын
The link to the blog has parts used and the fuel cell cover is stock, just painted.
@Dalonzo61710 ай бұрын
Im new with the rc stuff. Bought a car with the gen 3 rx8. When i go thru this process my throttle and reverse are backwards. It will not take the fwd until i do reverse 1st, how do i change this?
@sldoby5210 ай бұрын
Still waiting for the android connection?
@lutzmowinski978110 ай бұрын
What's with all the YR crap you're sticking on? Apart from the shocks, nothing they produce is of acceptable quality...
@TekinRacing8 ай бұрын
Because it's my car and to keep the cost somewhat low.
@verigone267710 ай бұрын
umm when you say WRC I think Lancia, Peugeot, and Audi I am thinking of Group B, but I am still not wrong... Subee def killed it after the death of group b