12:37 I’m looking at purchasing this machine. I’d like to add the additional exhaust fan. I can’t seem to find where you linked to it. Thank you and great information on the machine.

Hi man....I enjoyed your video and i too have an A24 Pro but my laser seems to lean forward on the gantry so its not level to the material surface i.e 4mm gap under front and 6mm at back . Could you confirm that yours is the same or level please and if it is then i need to somehow adjust the steel rollers etc to level it. This was how it was out of the box etc for me...Thanks in advance

Thanks bro! You earned a new Sub. Ive been researching Lasers for quite awhile now. Been lea ing on the WeCreat. Im going to use your link and pull the trigger now. Thanks again

Dude, can it engrave metal and can you run a large sheet of frosted acrylic glass? asking for a friend.

Woah!! What a game changer! I have some Real Estate Clients that are going to be hitting you up soon! Also, how cool are those stencils that were created after your cut outs. I feel like spray painting a wall with all those possible designs.

I pushed the THUMBS UP and it didn't incrament the count

Can i ask what image editor you are using to clean up the image? Thx

Usb-A to Usb-C

I have the wecreate with the electric clean air exhaust . My question is should my house still smell like burning wood

Can it cut a 2x4 bar of plywood?

ive almost got the money saved up to get one, i really want a wecreat 40w, so i can do some deep engravings pics for my church. ty

Super thorough and helpful video. Thank you!

No camera?

Thanks for the video. I liked your table comparison at the end the most. I wish there was a table that compared and showed everything. Size, laser powe, cost, unique features, etc.

Thank you for the video. Can you engrave inside of a tray with sides? Do you have to do something with the autofocus to focus on the correct height?

Can I use the fume extractor in a basement room? I have no way to vent.

Where do I get those silver prong attachments??. I’d like to engrave small items

El concreto tenías quebhecharle más aguado.muy seco

This is at least the third review I've seen between these things with no determining opinion from anyone on anything one way or the other, but as you and others have mentioned, the Xtool has more costly accessories so for that reason (and some other reason I can't think of at the moment) I'm gonna go with the Wecreate, though I'm sure they are equally fine machines. Just got hit with a home insurance bill though, so it looks like I'll have to wait until next month or so to get started. Ugh.

Can the wecreat cut leather? I know it will engrave it but I want something that will cut as well. Thank you

This is one of the best videos explaining the Atom25 Pro. Thank you! I wonder if you could make a video that explicitly shows how to connect all the wires. I’m totally overwhelmed trying to figure out where they all go!

Yall have a 2w, 20w and 40w, which is the best for engraving tumblrs

Check your link, it wasn't going to the Ortur Laser when I clicked it

I feel like the brass wraps could have been thinner-shorter so the they look more like bands rather than cuffs, but overall the chair looks cool.

Some nice tests. I wonder if on the tennis balls you could first engrave the background with low power to remove the fuzz and the run the actual engraving

We should play!

Very cool

If you could, would you go for a 20W or 40W?

Will the L2 24W etch a hardened knife blade?

HI! What's going on with the old K40? Is it now retired? Do you still use it in your daily work? Thanks for sharing! All the best!

We are definitely in the era of the diode

Great thorough review. I really like where these laser companies are headed in terms of safety. This would be a great starter laser for sure!

If you take the cover off the flame sensor, there's a variable resistor inside you can turn to adjust it. And you can engrave clear acrylic. Just leave the paper on it and mirror the image.

why couldn't someone make a base for the S1 with plywood? just a basic open box

Please do a video of the S1 cutting a PCB board, etching copper, cutting Die Boxes .3mm thick.

If I had troffer fixtures like those in my kitchen, I would save them and bypass ballasts, using them as shop lights in my garage with led tubes.

My issue is ….I have done this but one of the legs after a couple days slips down the pvc pipe…. Trying to find a solution for this. What I’ve tried so far again only lasts for a day or two. Any ideas?

Just ordered my S1 20 waiting for delivery, I planned to put it on a husky adjustable table from Home depot, it has a wooden top. Is that ok or does it need to be metal?

1 is only available in the USA whilst the other is global. Makes the decision for an Aussie like me dead easy.

The fan is a vortex fan, which is commonly used in air purifiers, it has a rectangular air outlet, so the holes according to the shape of the air outlet.

Which one do you recommend for a small jewelry business?

very interesting

Just saw an ad on Facebook that WeCreat offers a conveyor pass-through system & claims it is compatible with over 90% of lasers

Those fire sensors are just UV light sensors. so if you open the lid, puff! If you get a little flame up on cutting (Which happens) puff! No camera i assume? not even as addon?

Quick Note: The Flame Sensor Issue Was resolved with a quick adjustment on the physical machine

Thank you for providing a comparison between both lasers. Every other video does not touch on batching. If I have several (5) wooden keychains laid out evenly with the WeCreat and am going to engrave a word on each of the keychains, I find that the engraving is hit or miss. The goal is to engrave a word on the wooden keychain dead center from top, bottom, and sides. After autofocus and having the correct parameters, the finished product is off. One keychain may have the word closer to the top piece of the wood, and the other may shift to one side. Maybe out of five keychains, two will be dead center. Mind you, all five keychains were laid out in the center of the tray. Is this happening with your WeCreat if you do any batching ? Also, from day one, the WiFi does not work. It will connect to my network (2.4 GHz), and the computer is on 2.4 GHz, but it continues to drop off the network within seconds. The router is only about 5 feet away, printers, computers, and Alexa are all on the same network and in the same room with the WeCreat, and they don’t drop. Are you having the same issues? Everyone demonstrating WeCreat Vision on KZfaq seems to be using a USB cable for connectivity instead of WiFi. I wonder why? Thank you.

Can either color metal?

You need to replace that blue material with a nice soft thick fluffy bed. That looks like he's still laying on a piece of wood That's not comfortable for the dog

Thanks for your input and information.. I’m thinking about starting up my own…. What recommendations do you have for a computer??