Hi Mike, thank you for the information, great video.
@daye199716 сағат бұрын
This is great. Can you run this in docker with another PowerShell modules such as active directory module or VMware PowerShell module? Thank you.
@mwcloud11 сағат бұрын
Yes, you would simply need to modify the docker file that builds a container
@searchbug21 сағат бұрын
Thanks Mike! The file is presented as a solution for crashes or issues related to CrowdStrike Falcon, a well-known cybersecurity solution. However, it is actually designed to deceive users.
@mwcloud21 сағат бұрын
What is deceiving?
@itlabs2351Күн бұрын
Thank you for all!
@itlabs23512 күн бұрын
57:35 do you have a source or video on running this script from thumb drive?
@mwcloudКүн бұрын
@@itlabs2351 which script? The command from the psgallery? It’s on psgallery.com if you want to download it.
@kristopherleslie83432 күн бұрын
Another successful video and completion on my end. Thank you kindly buddy. I do want to see a video with the Zero touch, that must be very impressive.
@kristopherleslie83432 күн бұрын
Followed the guide, worked like a charm. I used the Windows Server 2019 boot wim and I was able to bypass the deprecation screen successfully.
@itlabs23512 күн бұрын
47:43 you recommend "explicitly adding and removing devices from blocking apps list"? can you pls clarity
@RetroRick19902 күн бұрын
Great, right to the point. 👍
@Abhi_ThePrOblemSOlver3 күн бұрын
Explanation is too good.💯
@mwcloud3 күн бұрын
Thank you. Remember to sub and watch my other content too
@Abhi_ThePrOblemSOlver2 күн бұрын
@@mwcloudYes i already did that.
@mwcloud2 күн бұрын
@@Abhi_ThePrOblemSOlver Thank you, I appreciate it.
@kristopherleslie83433 күн бұрын
I would say in the future don't use whiteboard, instead use Power Point. Actually does well for the type of setting your attempting to use it in.
@mwcloud3 күн бұрын
Thats a hard no, sorry. My style is drawing and visualising concepts as I explain them. Thank you for the comment though, I apreciate the input
@kristopherleslie83433 күн бұрын
@@mwcloud while I understand, if some is taking screenshots, well it’s not legible. Respectfully.
@mwcloud3 күн бұрын
I will try to be neater in the future. It is a challenge as I explain and draw at the same time to try and keep a natural flow that engages an audience when explaining topics. I was unaware that people are attempting static screenshots and I understand then my writing could be challenging on some of my diagrams
@kristopherleslie83433 күн бұрын
@@mwcloud well I mean you can use AI to watch the video, and assist with creating a manual. Or alternatively, include a word/pdf/PowerPoint in the description which also allows you to keep your current workflow and addresses the cases of people wanting documentation. I tend to rewatch videos until I know the steps by second nature, and read supporting docs.
@kristopherleslie83433 күн бұрын
@@mwcloud also the content I’ve watched of yours is definitely well tailored and thank you
@RetroRick19903 күн бұрын
Thanks man, all worked very well, no problem 👏
@mwcloud3 күн бұрын
No problem 👍
@TheBearAndTheBull4 күн бұрын
This works perfectly, however I am also interested in creating a completely unattended install where it will pass everything and completely install the OS and stop at the login screen, so that when the device is then handed to a user they just need to input login details they are good to go, is this possible and can this be achieved within WDS ? I see there is a section for adding unattended files but in terms of the values I would need to include in the XML I have no idea what I would need to include. Thanks for any tips in advance.
@mwcloud4 күн бұрын
Possible yes, but, if you have any number of machines you want to use SCCM and MDT to get that done. It is called a “zero touch” install if you want to google it and start looking through the MS documentation. It can be quite complex and uses “task sequences” to get the job done. Start simple with them when you are testing and then increase complexity as you go and deploy many times to a text machine or VM until you get it right. There is not one right way of doing that depending on the config you need for your environment
@mwcloud4 күн бұрын
Oh, and hashtag like and subscribe 😊
@kristopherleslie83433 күн бұрын
@@mwcloud yea that's a big difference in cost and deployment time haha. I would vouch for Smart Deploy also in this scenario.
@mdrashidhussain71684 күн бұрын
What is command line syntax..mmm?????
@mwcloud4 күн бұрын
@@mdrashidhussain7168 for what ?
@kjejac5 күн бұрын
Thank you for the video, new subscriber. (One comment; the 'break' does not work as intended in PwSh 7.4.4, had to use 'return' to break the loop (works in 5.1) )
@mwcloud3 күн бұрын
Good catch! Thanks for the input, as with all technical demos sometimes error fall through. Thank you very much for putting this in a comment so others can see, it helps us all learn.
@BekeleDadhi5 күн бұрын
Awesome tutorial
@mwcloud5 күн бұрын
@@BekeleDadhi thank you
@SephOrtha5 күн бұрын
nice videos man trying to wrap my head around this stuff.. superflurious was hilarious
@mwcloud3 күн бұрын
Glad you enjoyed
@user-gn8gr2qm4o5 күн бұрын
It's so cringe watching you write on the white board.
@mwcloud5 күн бұрын
Why?
@TheBearAndTheBull4 күн бұрын
White board was fine and served it's purpose.
@mwcloud4 күн бұрын
@@TheBearAndTheBull Thanks, I know its not the neatest, but its hard to draw on a drawing tablet and speak at the same time and think about the next thing you are going to say!
@guneskedi6 күн бұрын
Definitely a great demo. Especially 24.23 is awesome! :D
@mwcloud6 күн бұрын
Glad you think so!
@user-gn8gr2qm4o6 күн бұрын
Yes, we want longer video on get-aduser and set-aduser :D
@mwcloud6 күн бұрын
@@user-gn8gr2qm4o okay, I’ll sort one out with a bit of scripting how to in there too for making lots of user accounts and adding people to groups and what not
@srinivas16237 күн бұрын
HI MIke thanks for nice videos if possible could u please do some realtime scnarios for devops enginner please interview prospect
@mwcloud7 күн бұрын
What do you mean by realtime scenarios ?
@srinivas16236 күн бұрын
@@mwcloud what kind of activities we do using powershell to automate some the tasks as devops engineer some scenarios
@srinivas16238 күн бұрын
Thanks Mike
@mwcloud3 күн бұрын
Any time
@srinivas16239 күн бұрын
nice explanation please add realtime flow too
@mwcloud3 күн бұрын
I will bear this in mind if I revisit this topic, but real time packet capture is not all that possible in azure but I could use a traceroute to prove the point
@supriyochatterjee40959 күн бұрын
Always great information, wish to see lots of PowerShell deep dive videos covering various troubleshooting aspects and scenarios in AWS and Azure using PowerShell and how to use PowerShell in those cloud environments conveniently.
@mwcloud9 күн бұрын
@@supriyochatterjee4095 ok I will try and make in the future
@supriyochatterjee40959 күн бұрын
@@mwcloud Thanks, much appreciated.
@ehlinna_46129 күн бұрын
Nice video bro
@mwcloud7 күн бұрын
Thanks
@Robert-yk8tx10 күн бұрын
Thank you for sharing. So in the onprem firewall's ipsec settings, you have to give the Virtual Network ip-range and not the Gateway Subnet? 🤔
@mwcloud3 күн бұрын
The VPN endpoints are also routing traffic as routers so they need to know the ranges on the other side of the tunnel
@GladiatorPower10 күн бұрын
great video mikey
@sudhirsingh796410 күн бұрын
Hi Mike, why created service endpoint? We can achieve through azure end point
@mwcloud3 күн бұрын
Because sometimes you don’t need to isolate to one network
@artiguf10 күн бұрын
awesome thx
@pimenjc11 күн бұрын
MUITO OBRIGADO.
@mwcloud11 күн бұрын
De nada
@michaelxz130511 күн бұрын
this is light years ahead of a thick Indian accent (common on IT videos but so distracting)
@mwcloud11 күн бұрын
Thanks
@jamesjames60111 күн бұрын
Great video as always. I'm preparing for az-104 exam, just wondering if you have a playlist for it
@mwcloud11 күн бұрын
yes, subscribe, take a look at my channel page and there are a number of playlists for you
@jamesjames60111 күн бұрын
@@mwcloud Awesome, thank you
@emrelabarjr680311 күн бұрын
Can you show the reverse? Create image form Client then store it on the WDS and then use that to image another PC?
@mwcloud11 күн бұрын
I can do, but you will have to wait for that video
@dsmn9213 күн бұрын
amazing content Mike, keep it up
@mwcloud11 күн бұрын
Appreciate it!
@SoulJah87613 күн бұрын
I always used tnc - wasn't aware of Test-Connection. Thanks for the video.
@mwcloud13 күн бұрын
No problem. Do you like the format of a quick demo of a single PowerShell concept ?
@SoulJah87611 күн бұрын
@@mwcloudI'd say it's a great way to share knowledge, yeah. Especially for those among us with short attention spans, which does seem to be a norm. (Myself included.)
@whyzen208113 күн бұрын
Thank you so much for your content. I've used a number of your videos to upskill and improve my productivity at work, including using Powershell and MDT to deploy Windows 11. Keep it up 🤗
@mwcloud13 күн бұрын
Thank you so much! This is first time someone has given me a super! Amazing 😀. I will make more when I have time between my actual training courses.
@abhijitpattil15 күн бұрын
Hi @Milke, thanks for this great information. I have one question, if i select Azure Hybrid Benefit and i have Win Server license, MS says i need to have active software assurance to use that license on cloud. So, what to do in this case?
@mwcloud11 күн бұрын
I am not too sure, and when money is on the line with licences always go with what your Microsoft Licence provider tells you, as that way there is recourse should it not be correct in an audit. Do not just go off what you read online if there is any ambiguity
@GilbertoDECampos18 күн бұрын
what about to get total of column/sum? I did it with a foreach but I am still trying to do it without a loop
@mwcloud18 күн бұрын
@@GilbertoDECampos what command are you running ? Put it in here
@GilbertoDECampos18 күн бұрын
@@mwcloud What I did was a function, using childitem to get files, extension and size and after that I create a for ech to totalize by file extension, sorry for not have access to the code but I am from my mobile. My point is if this can be done easier, I want to receive a folder path and be able to return total size by file extension. I was trying measure without good luck. Thanks in advance by your attention!
@mwcloud17 күн бұрын
@@GilbertoDECampos function Get-FileCountByExtension { param ( [string]$directory ) # Retrieve all files in the directory, ignoring subdirectories $files = Get-ChildItem -Path $directory -File # Group files by extension and sort by extension $groupedFiles = $files | Group-Object -Property Extension | Sort-Object -Property Name # Display the count of files per extension foreach ($group in $groupedFiles) { [PSCustomObject]@{ Extension = $group.Name Count = $group.Count } } }
@GilbertoDECampos17 күн бұрын
@@mwcloud yes, it works fine for count number of files by each extension, but we want total sum of file size, somethink like: Extension Total Size TMP 3GB xlm 0.5GB doc 2GB and we did it suing foreach, my pont was if measure can count, how to use measure-object for sum total sizes.
@GilbertoDECampos17 күн бұрын
Looks like is measure-object -property PROPERTYNAME -sum
@jakehitches188618 күн бұрын
Really enjoyed watching this video , I will check out your other ones.
@mwcloud11 күн бұрын
Please do!
@keepinfotechsimple23 күн бұрын
Brilliant!
@mwcloud11 күн бұрын
Thank you
@Turkeylurk8824 күн бұрын
First
@mwcloud11 күн бұрын
you are
@Matt-mv7np25 күн бұрын
Great video! I’m searching for a solution like this one but with two on premise ISP’s for redundancy.
@mwcloud11 күн бұрын
Glad it was helpful!
@kanakkumar986127 күн бұрын
It worked in whole organisation
@mwcloud11 күн бұрын
Glad it worked out for out
@kaleidoscopeon28 күн бұрын
amazing info my friend. really appreciate it.
@mwcloud11 күн бұрын
No problem 👍
@Steve-Richter28 күн бұрын
can the entire drivers/crowdstrike folder be deleted? Crowdstrike was installed on a laptop that was briefly used in a corporate setting. But now the laptop is home use only. Crowdstrike cannot be uninstalled. Will removing the folder prevent it from running?
@mwcloud11 күн бұрын
yes, delete only the one file
@FijyFilms29 күн бұрын
Seems great however domain and local admin are unable to delete this file. Seems to be happening on random devices. Havent seen anyone else able to solve yet. Admin persmissions are required, and you can see in permissions there is more than enough clearance to delete the file, but something is stopping it.
@GonzalezJio29 күн бұрын
Press F8 when booting. Go into troubleshoot. Advanced options. Command prompt. And delete C:\Windows\System32\drivers\CrowdStrike, delete file C-00000291*.sys Restart
@FijyFilms29 күн бұрын
@@GonzalezJio Nope unfortunately. 1. F8 does not work 2. Every method possible to get into safe mode has been attempted and the computers will blue screen, forget about safe mode, boot, fail, repeat. On top of “not having permission” to delete the driver files, despite trying local admin, and domain admin. Absolute nightmare on top of the fact we have BitLocker on every computer.
@thomasnguyen793427 күн бұрын
At windows command at the Advanced option type del c:\windows\system32\drivers\Crowdstrike\C-00000291*.sys given that you have confirmed the bitlocker in the business environmentls
@mazrostamian29 күн бұрын
Where else could crowdstrike be installed at?
@mwcloud29 күн бұрын
They have thousands of enterprise customers and install bases of what I can assume as millions of machines.