Heyy en donde están tengo una me gustaría saver para cuando me toque ir
@majd.y07 Жыл бұрын
is this on the stock motor and 48v battery ?
@fabijus100 Жыл бұрын
Yes it is with stock motor and it can work with 48v battery
@majd.y07 Жыл бұрын
@fabijus100 thanks for replying because I'm thinking about getting a scooter like this and planning to buy like this controller
@majd.y07 Жыл бұрын
@@fabijus100 how fast does it go?
@fabijus100 Жыл бұрын
@@majd.y07 customer told he was able to reach 78 km/h with 60v battery, so with 48v speed will be smaller but similar.
@majd.y07 Жыл бұрын
@fabijus100 the 60v and the 48v have the same motor right?
@cjhobbs4214 Жыл бұрын
Will it work with the 60 13ah
@fabijus100 Жыл бұрын
yes
@cjhobbs4214 Жыл бұрын
@@fabijus100 which 1 do I order?
@fabijus100 Жыл бұрын
@@cjhobbs4214 I recommend: Display: 750C Battery type 1 Radiator: 2 Also during checkout add note that you will use 60v 13ah battery
@johnnylong2049 Жыл бұрын
Can I use a 52v one day and a 72v the next day without having to change anything (display, or changing stuff on the computer)?
@fabijus100 Жыл бұрын
Hi! yes, we can program controller to work with all batteries. Contact us directly - [email protected] for more information.
@jeffonrides Жыл бұрын
Hey does it matter which phase wires are connected together?
@themrfabio2459 Жыл бұрын
Music ruins all vids!
@JoseLuis-wz6xh Жыл бұрын
Hi, can this kit work with any other display like the 500C? Or eggrider? Or is it only with the one shown compatible? Thank you
@fabijus100 Жыл бұрын
Hello, It can't work with 500C but it can with eggrider. Check it out: www.taisomirgaminam.lt/en/product/asi-bac-855-pp-versija-bbshd-varikliui/
@JoseLuis-wz6xh Жыл бұрын
@@fabijus100 Thank you very much for the response. I am about to purchase this controller paired with the eggrider V2. The only question remaining would be, what would be the minimum requirements for a battery to run this system? l have a 52V 13Ah with a maximum rated 30A discharge continuous, would that be able to run or should I upgrade to a bigger battery? Best regards
@fabijus100 Жыл бұрын
@@JoseLuis-wz6xh we can program controller for your battery but if you want to get maximum power we would recommend to use 52v with 70a discharge or 72v with 50a discharge current.
@pc9395 Жыл бұрын
Been trying to get mine to run from the Eggrider but with no success can anyone point me in the right direction I have a useless broken 750c screen that will not power up, and find it impossible to replace with the BAC855 protocol
@fabijus100 Жыл бұрын
Hello, Contact us by email - [email protected] We will offer for you 750C display which will work with ASI controller.
@yj8471 Жыл бұрын
@@fabijus100 can you program the C500 mini it's a smaller better unit ?
@fabijus100 Жыл бұрын
@@yj8471 Hi! Send us an email - [email protected] Do not forget to add all necessary information and we will reply to you as soon as possible!
@pc9395 Жыл бұрын
@@fabijus100 what information ?
@fabijus100 Жыл бұрын
@@pc9395 Hi! The previous message was to @yj847. For the @pc9395 Contact us by email - [email protected] And describe your problem.
@ruslangozoloev9089 Жыл бұрын
Hello friend, if I have a 48v battery, I can change the parameters to 60/72v and what won't happen? Tell me can this be done with bbs02 750w? If you can write in Russian through a translator.
@fabijus100 Жыл бұрын
Hello, please write your quetion in English to [email protected] we will answer as soon as possible :)
@motul800 Жыл бұрын
Hello, can I choose between 52, 60 and 72 volts on the display? Can I adjust the strength of the support levels myself like with the bbshd controller? Can I set the max ampere myself?
@fabijus100 Жыл бұрын
Hello, you can change each assist level power by % in advanced settings. Talking about batteries - we can program controller for one specific battery or remove all limitations which depends on battery. For more information contact us on Facebook- Taisom ir gaminam Or email- [email protected]
@motul800 Жыл бұрын
3 or 9 support levels ?
@fabijus100 Жыл бұрын
yes, you can choose between 3/5/9
@kampango789 Жыл бұрын
Speak
@GB-vn1tf Жыл бұрын
Does that work o a bb02?
@sigmaoctantis_nz2 жыл бұрын
Why not just re-use the controller housing from the BBSHD instead of putting a plastic one on?
@fabijus1002 жыл бұрын
If you want you can use original controller cover ;)
@felipevallejo22052 жыл бұрын
Can you help about what to choose when you are ordering the así ? Please
@fabijus1002 жыл бұрын
Hello, read item description. All details are mentioned in the item description.
@minhavida38872 жыл бұрын
Just perfect 🤩 and thanks
@TheFilminators2 жыл бұрын
Can this be put on a bbs02?
@yj84712 жыл бұрын
Yes I use one on the 02 .
@JohnjOcampo2 жыл бұрын
Hi i am planning on buying this kit but i already have an eggrider V2, can i get the kit without the display?
Seems like the cyc x1 stealth kit uses a similar controller, eliminates the need to do anything and much cheaper in total. I wonder what the performance comparison would be. 🤔
@yellowsheeps2 жыл бұрын
CYC X1 Stealth is lighter, includes same controller and has "torque sensor". BAC 855 housed beside motor (cleaner install). CYC motor is more powerful (1500 W). The only thing BBSHD has vs CYC X1 Stealth is history, proven reliability and availability of spare parts.
@JohnjOcampo2 жыл бұрын
@@yellowsheeps i bough the bac855 from CYC, will it still work for my bbshd? Cause it said it was only programmed for CYC motors but i figured that was just a warranty thing.
@yellowsheeps2 жыл бұрын
@@JohnjOcampo The CYC Bac855 controller is only for their 2 motors and even in this case, the Bac855 is not interchangeable between the 2 motors without re-programming. To use the Bac with the bbshd, you would need it re-programed by someone familiar with programming a bac855 for a bbshd.
@JohnjOcampo2 жыл бұрын
@@yellowsheeps wow man what a huge mistake i made, im going to see if i can cancel the order. Thank you for the info. Where should i buy the asi bac855 for the bbshd?
@yellowsheeps2 жыл бұрын
@@JohnjOcampo The link from this video is a seller. The Bac855 is in short supply and on back-order worldwide so you should have no problem selling one.
@TheADRIANOVALENTINO2 жыл бұрын
Thats awesome. How much more is the torque watts and speed? Without that modification its around 165 NM torque , 1500wt peak, and up to 65km hr.
@fabijus1002 жыл бұрын
Hi, All details you can find here: www.taisomirgaminam.lt/en/product/asi-bac-855-pp-versija-bbshd-varikliui/
@TheADRIANOVALENTINO2 жыл бұрын
@@fabijus100 Ok il have a look. Thanks for your response. Im not a computer electrical guy, bit of a stupid question but I was wondering where you hook up the battery? Do you have a video on the conversion build ?
@TheADRIANOVALENTINO2 жыл бұрын
IM looking at the item doesnt say how much more powerful and faster it is maybe im blind..lol
@fabijus1002 жыл бұрын
@@TheADRIANOVALENTINO The controller is programmed: FOC Voltage: 36-72v. Power: 4250w.
@SpreadingKnowledgeVlogs2 жыл бұрын
I have a similar set up but use the nxt display from my boy Alan at ERT what's nice about that is the full tuning capabilities from the display itself and you can also run the egg rider v2 display on the same harness and switch back and fourth if you want something smaller at times
@@fabijus100 im considering about buying 😁 thnx for answer🙋♂️
@cainetastic3 жыл бұрын
Cool - I’ve got a Weped GT50 dual motor 1800w each motor. I’m thinking to rock x2 BAC 855. I’m currently getting 50mph so I’m thinking with field weakening I should get at least 60mph.
@c0ntender19 ай бұрын
How much did the upgrade cost and can you please give me a link to the parts 😊