21 күн бұрын
2 ай бұрын
4 ай бұрын
4 ай бұрын
5 ай бұрын
5 ай бұрын
6 ай бұрын
6 ай бұрын
7 ай бұрын
7 ай бұрын
7 ай бұрын
7 ай бұрын
8 ай бұрын
8 ай бұрын
8 ай бұрын
9 ай бұрын
9 ай бұрын
Пікірлер
@mrpaniyur7431 2 күн бұрын
sir how the bits are tightining , in respect of E 108 drill
@MicroMageRepair 2 күн бұрын
It has two set screws , you have to tighten or loosen using the Allen driver supplied with the tool.
@thj_art 2 күн бұрын
Can I have you repair my switch?
@MicroMageRepair 2 күн бұрын
Head over to my site www. micromage.repair and fill out the form. I'll get with you from there.
@mrpaniyur7431 2 күн бұрын
sir will explain how to use E - 108 3 speed grindind rotary driil , I also had maAnt mini rotary how the bits are tighten
@MicroMageRepair 2 күн бұрын
The older version like these had a set screw . The Allen wrench is included with the tool. The newer version does not have a set screw. The bits just plug in. Speed is controlled by button push, push it more than once to increase rpm.
@bryanfrye8770 5 күн бұрын
Tried my first port replacement on the switch and i pulled about all of the same pads, i tried flowing from underside while applying pressure, i applied too much pressure. It was a switch that had been laying around with a no power issue.
@MicroMageRepair 5 күн бұрын
Pressure is not necessary. If you heat from the bottom with the board either hanging off the bench or in a holder like I use that slightly elevates the board off the bench it will just drop off. Won't typically pull pads with that method if pad damage doesn't already exist. That being said it is still very repairable.
@bryanfrye8770 5 күн бұрын
@MicroMageRepair yeah, im going to try and repair it. Have you ever used the trace repair pads you can buy from ali express or Amazon?
@MicroMageRepair 5 күн бұрын
@bryanfrye8770 I have. I don't personally like them for something this intensive. I find them a bit tedious compared to jumpers. That is possibly just me. I had a lot of practice running jumper wire prior to lugs even being a thing.
@bryanfrye8770 5 күн бұрын
@@MicroMageRepair gotcha, any specific jumper wire you recommend?
@MicroMageRepair 5 күн бұрын
@bryanfrye8770 Any 36-40 awg solid single conductor wire should do. Doesn't even need to be enamel coated on these ports as your not doing any crossing or long routing.
@ajaks7636 7 күн бұрын
Great Review! Sorry you're not getting as many units to repair. Great Video! Thank You.
@MicroMageRepair 7 күн бұрын
Thank you!
@crimson706 7 күн бұрын
Just ordered mine. Need for disassembling knives so should be plenty of power.
@MicroMageRepair 7 күн бұрын
I've been using it for about a month. Still happy with it.
@MicroMageRepair 7 күн бұрын
5% off code: NNYISPVI amzn.to/3LlHBuP or kaiweets.com/products/es21-precise-electric-screwdriver 15% off code: 15MMR
@matthman752 9 күн бұрын
I’m French Je ne sais pas comment réparer comment je dois faire ?
@MicroMageRepair 9 күн бұрын
My advice is to lean soldering first. There are a lot of devices you can repair just by knowing how to Solder. You will always be learning how to troubleshoot things. There is no mastering that (especially without schematics and board views)
@C1a4d3 18 күн бұрын
You are a life saver I just got it today.. 😭 staying strong for my old switch 💪
@MicroMageRepair 18 күн бұрын
Thank you!
@bryancampbell4604 18 күн бұрын
Are you doing well?
@MicroMageRepair 18 күн бұрын
Hi Bryan. I am well. Thanks for asking.
@bryancampbell4604 18 күн бұрын
@@MicroMageRepair That is great to hear! You sounded kind of down in the video, so I wanted to make sure.
@MicroMageRepair 18 күн бұрын
@bryancampbell4604 I may not have been well at the time of that recording. It's been an eventful year and that footage is from months ago. But as of this moment all is well.
@nebulink 20 күн бұрын
love the videos. keep them coming buddy.
@MicroMageRepair 20 күн бұрын
Appreciate you!
@thedarkman9396 21 күн бұрын
is it ok if i used blue solder mask insted of green one ?
@MicroMageRepair 21 күн бұрын
Doesn't matter, it's all pretty much the same other than the color and sometimes how they cure (I recommend UV curable for time)
@thedarkman9396 21 күн бұрын
@@MicroMageRepair yes about UV forget to ask .. i have UV whitestone its used for screen prodector phones .. can i use it ? by the way its really hevy light and big
@MicroMageRepair 21 күн бұрын
@thedarkman9396 As long as you don't damage the board with it I'm sure you could. UV is UV. The more powerful the less time it will take.
@thedarkman9396 21 күн бұрын
@@MicroMageRepair exuse me but what do you mean by damage ? you mean the light could damage the board or something ?
@MicroMageRepair 21 күн бұрын
@@thedarkman9396 You said it was big and heavy, so don't drop it on the board lol
@computerthrills 21 күн бұрын
I have sent a few customers your way. Since I refuse to work on nintendo switches. Hopefully some contacted you.
@MicroMageRepair 21 күн бұрын
I appreciate it. I rarely get informed about who referred who on work submissions unfortunately.
@computerthrills 21 күн бұрын
@@MicroMageRepair Same here. They just say that someone suggested me.
@highroyds 21 күн бұрын
Excellent video 👌 think feryines finding it hard to get reliable chips and ports. Joey discovered a few weeks ago that some switch lite ports have shorter pins than the normally ones.
@MicroMageRepair 21 күн бұрын
Appreciate the information! Thanks!
@highroyds 21 күн бұрын
@@MicroMageRepair anytime, it was discovered during a live stream as the T824 tester couldn’t connect to certain pins but everything worked perfectly
@MicroMageRepair 21 күн бұрын
@@highroyds Good to know, I just acquired one of those recently
@highroyds 21 күн бұрын
@@MicroMageRepair nice !! Could get one of the hdmi testers for it, does come in handy 😉
@ajaks7636 21 күн бұрын
Breakfast and a Micro Mage Video and Repair! That hits the spot. Intermittent faults are the worst. Thank You.
@MicroMageRepair 21 күн бұрын
Thank you sir! They definitely make it a challenge!
@karlhavoc4651 27 күн бұрын
I bought one and am curious of the build. I don't see a way to screw the support pole into the base. The rod is just hollow with no threading. I'm curious if I'm just dumb and missing something or do I have a faulty one.
@MicroMageRepair 27 күн бұрын
Should have two torx screws and the pole should have two screw holes on one end. The screws feed from the bottom of the plate into the pole.
@karlhavoc4651 27 күн бұрын
@@MicroMageRepair ah thank you so much! Mine is missing the screw holes in the rod. Great video and thank you for the fast response!
@MicroMageRepair 27 күн бұрын
@karlhavoc4651 Your welcome! How weird, no idea how those things happen.
@ajaks7636 Ай бұрын
Great Review and Video! Pretty good product too. Thank You.
@MicroMageRepair Ай бұрын
Thank you!
@RayRay-lm8po Ай бұрын
Thank you, I was not getting usb on my port, didn’t see the u bend had a vija 😅
@MicroMageRepair Ай бұрын
Thanks for watching! Glad it helped you!
@MicroMageRepair Ай бұрын
amzn.to/4bHwAia
@davegeorge7094 Ай бұрын
Must have for older eyeballs man.
@MicroMageRepair Ай бұрын
I'm not a spring chicken as they say.
@QsTechService1 Ай бұрын
Nice, review video man you pulled out the old stomping grounds old-school microscope that I started off with that I sold to have a better life for someone to use
@MicroMageRepair Ай бұрын
I think everyone from our era started with that one lol. It was great for it's time but compared to what is available now it's trash lol Appreciate you!
@mrpaniyur7431 Ай бұрын
sir where did get additional bits for maAnt drill
@MicroMageRepair Ай бұрын
The MaAnt didn't come with all that many. They where however I thought higher quality. The other set came with a higher selection but lower feeling quality.
@mechadragon2692 Ай бұрын
One of the pins broke off in my switch but it still charges should i still repair it ?
@MicroMageRepair Ай бұрын
If the middle plastic has any wiggle in it then you should. That plastic is the only thing separating all those pins, bad things happen eventually if it's compromised. If it was a clean break but everything else is solid, and you are getting full function / docking then you might be OK letting it ride.
@urskiz Ай бұрын
Could this grind down stripper screw head of philips 000/ philips 00 at back of the steam deck? Thank you
@MicroMageRepair Ай бұрын
Probably though not as fast as a dremal, it has pretty limited torque.
@weirdgamer4452 Ай бұрын
What if it gave you that code and then it just turned off and never turned on again
@MicroMageRepair Ай бұрын
Pretty normal, chip either just completely died or the battery ran out.
@weirdgamer4452 Ай бұрын
Would I be able to replace the battery to get it back in working order or just buy a new switch?
@MicroMageRepair Ай бұрын
@weirdgamer4452 It might turn back on and show the error with a charged one but it won't work or charge.
@nebulink Ай бұрын
Keep up with the great work. Love your videos.
@MicroMageRepair Ай бұрын
Appreciate you!
@RetroFix Ай бұрын
The other day I got to save a Series X with similar missing pads. According to the customer, they first took it to a competitor repair shop in my area 😮 with a big nice shop and everything. They’ve been around for quite a while too. I know it was them too because of their terrible thermal paste job. Always white stuff, all around the dye but not on it. I’ve been correcting it for years. … I’ve clearly had better teachers 😉
@MicroMageRepair Ай бұрын
Very nice! Show them how it's done!
@RayRay-lm8po Ай бұрын
Thank you for makes these kinds of videos, I was able to fix a Xbox series s with 17 missing pads.
@MicroMageRepair Ай бұрын
Awesome! I'm glad you find them helpful!
@QsTechService1 Ай бұрын
definitely pulled out the stops on the cleaning 🧼 lol by the way, your popcorn bowl is empty haha 😂
@MicroMageRepair Ай бұрын
Rapid Clean Technology! Yeah, I had to cut back. Stuff is like crack.
@QsTechService1 Ай бұрын
@@MicroMageRepair haha 😂
@ajaks7636 Ай бұрын
Another Great Repair and Video!! Thank You for the Education, and Entertainment. 😀
@MicroMageRepair Ай бұрын
Thank you for watching it!
@matthewbain2408 Ай бұрын
were been josh ???🙃ive caught double phumonia🤒
@MicroMageRepair Ай бұрын
I'm still here Matthew! Sorry to hear that! Gotta take care of yourself, sir!
@matthewbain2408 Ай бұрын
@@MicroMageRepair thanks josh😁
@D_Ro19 2 ай бұрын
I need help on how to repair a PS5 slim fan connector to the motherboard
@D_Ro19 2 ай бұрын
I just done know where the traces run it's different then the original PS5
@MicroMageRepair 2 ай бұрын
You can email me at [email protected]. Send a few clear images and I may be able to decipher it for you. I haven't personally seen the slim yet.
@user-bh1tj8df3l 2 ай бұрын
Yeah. Agree with you. To get started and become familiar with this type of device: one of that price is very good, that is, before taking the next step to a more advanced one, which of course will be more expensive. As an example, for a Nintendo SW board, while one of my technicians is trying to fix the client's board, I would be doing visual inspection and measurements with this device on another similar "donor" board to speed up the work. All the best. PS: Late but sure my comment and like. I took my father to see his family (Asturias, Spain) and he said he would stay all summer (much better weather than NW Mexico, El Fuerte, Sinaloa, 42 Celsius in the shade today). I stayed for two weeks to rest from the routine and visit my uncles. Thank you so much for sharing Josh. A fraternal greeting from Mexico.
@MicroMageRepair 2 ай бұрын
Thank you Carlos! Enjoy your family time, it's a precious thing. Keep checking in here. I have a look at a next level microscope scheduled soon as well as some other interesting things.
@ajaks7636 2 ай бұрын
My Grandmother used to call underwear Gochi. It looks pretty light, did it move around a lot? It would work for many things though. Thank You for the Great Review Video! Have a Great Day Mage! 😀
@MicroMageRepair 2 ай бұрын
The base plate is adequate weight. I didn't notice a whole lot of movement. It's entry level for sure, but the entry level has come a long way.
@MicroMageRepair 2 ай бұрын
25MicMag Promo code for 25% off amzn.to/4c86mWB
@highroyds 2 ай бұрын
the choice of microscope with screens is mind boggling .... if only they had been around 10 years ago lol
@MicroMageRepair 2 ай бұрын
I know! Right? The stuff that was available when I started was a joke compared to now.
@nebulink 2 ай бұрын
more videos please
@MicroMageRepair 2 ай бұрын
Appreciate you!
@Lazyman1975 2 ай бұрын
You can also use pieces of solder wick for new mounting pads.
@MicroMageRepair 2 ай бұрын
Yes, it is a very valid technique. It's been well covered by others. I didn't see a need to repeat them.
@user-bh1tj8df3l 3 ай бұрын
Of course YES, I am also delighted to have you back and with a successful repair, even better. A sincere congratulations. Thank you very much for sharing, Josh. Greetings from Mexico.
@MicroMageRepair 3 ай бұрын
Thank you, Carlos! I haven't gone anywhere, just reducing the frequency for a while. Need a break.
@ajaks7636 3 ай бұрын
Glad to see you back, and that you're using protection. Great Repair and Video! Thank You Mage. 😀
@MicroMageRepair 3 ай бұрын
Appreciate you!
@MjZzz593 3 ай бұрын
I went to a shop to fix it and they were charging me 200 bucks,so I would like to know how much would you really charge for this
@MicroMageRepair 3 ай бұрын
My situation is different and not really comparable. I don't have a shop's overhead. I also factor in shipping cost, wich is not insignificant, into my prices. Otherwise, I'd never get any mailed in. My overall cost with shipping comes in cheaper than $200 but you will have more hoops to jump through and a longer turn around due to shipping times. I do offer proof of my results right here in video form, so you don't have to wonder about how it will turn out. It just depends on your needs.
@bryancampbell4604 3 ай бұрын
So glad to see a new video! I hope you're doing well!
@MicroMageRepair 3 ай бұрын
I'm well. Thank you, Bryan.
@bryancampbell4604 3 ай бұрын
@MicroMageRepair You're quite welcome. You are one of the best electronics repair persons on here. Very detailed orientated, so people can easily follow.
@KnuckleHead54 3 ай бұрын
Thanks for sharing, that's the nicest one I've seen. May just have to have it 😊
@MicroMageRepair 3 ай бұрын
It's come in handy a few times since this recording.
@user-bh1tj8df3l 3 ай бұрын
Are you okay brother? Health good? We haven't seen you in a month and we miss you. Another way of saying it: I sincerely hope that you go on vacation, enjoying and relaxing and returning later with great spirit and enthusiasm for the activity that we like so much (electronic repairs). A hug from Mexico.
@MicroMageRepair 3 ай бұрын
I'm good Carlos. Taking a break from the KZfaq grind. Thanks for asking and the support.
@user-bh1tj8df3l 3 ай бұрын
@@MicroMageRepair Thanks a God bro. 😊Happy to know that. Thanks for responding. A fraternal hug from Mexico.
@Lazyman1975 3 ай бұрын
Ive been teaching myself ways to be steady as I was a heavy drinker back in the day. Thanks for the tip.
@MicroMageRepair 3 ай бұрын
Your very welcome
@kurtvongurt758 3 ай бұрын
Nice. Hope i will get the excitement of fixing my first switch soon after some fails
@MicroMageRepair 3 ай бұрын
Just immerse yourself in the information available, practice the techniques, and you will do fine.
@jsppagtalunan1345 3 ай бұрын
hello sir, did you put 10kohms for negative and middle pin for modified cable for battery connector?
@MicroMageRepair 3 ай бұрын
I didn't put anything additional, I just put the connectors on and may have lucked out and chose the right one.
@jsppagtalunan1345 3 ай бұрын
@@MicroMageRepair can you show me which cable version are you using sir?
@MicroMageRepair 3 ай бұрын
@@jsppagtalunan1345 It's linked in the description of my videos (at least the ones posted in the last year or so)
@jsppagtalunan1345 3 ай бұрын
@@MicroMageRepair i cannot really find the link sir, im only seing the usb c adaptor for building psu test cable, the one that i need is for battery connector that you've used, its like an iphone battery cable then you connect the wire from nintendo switch battery wire with connector thanks for reply :)😃😃
@MicroMageRepair 3 ай бұрын
@@jsppagtalunan1345 Battery Squid ebay.us/FRXoOQ
@kellybriggs7971 4 ай бұрын
This was a great tutorial, thanks!
@MicroMageRepair 4 ай бұрын
Thank you!
@kurtvongurt758 4 ай бұрын
That video helped me big time😄💪 Just bought a few broken switches and one of them needs this connector replaced. The daughterboard needs also to be changed as the ribbon cable. Pre owner did a fantastic job lol. I bought a aftermarket daughter board with ribbon cable cheap. I will try to desolder the good connector from the old daughterboard and use it on the motherboard.
@MicroMageRepair 4 ай бұрын
Awesome! Let me know how it goes!