I’m working on a solid model, creating curves, but none of the curves lineup to each other, at different depth different angles, there is nothing flat or square about this part. It’s all radius, angles fillets. I’m having a problem with the edge curves.
@kylefuller6 ай бұрын
Love the content and your videos have helped me a ton. I would love a video diving a little deeper on tool axis control. Specifically on the creation/generation of wireframe “lines” to drive a tool in tricky 5ax spots. I’ve had some luck but I’m not sure if I understand the mechanics of creating the extra geometry for the “lines” section.
@user-dd8jn5kv4p9 ай бұрын
Thank you for sharing your knowledge
@thirugnanas60749 ай бұрын
Thanks 🙏
@miguelherrerajr.920310 ай бұрын
Good Information about the new options to work wit it...
@hichamelmoutawakil761711 ай бұрын
Thank you for this information
@spencerfox2730 Жыл бұрын
Wonderful! I do however want to see chained direction being enforced. Most of the time “deburr” is going conventional and most would prefer climb. Is there a setting I’ve been missing? I sure hope there is. :-)
@magaraoleandro Жыл бұрын
As always, Mcam bringing us useful tips. I recommend the Streaming Teacher channel as well.
@themcamnw Жыл бұрын
Thank you @magaraoleandro! We are always happy to help people understand Mastercam's features better. Fun fact: Streamingteacher was actually our sister company for 18 years! Streamingteacher's videos and webinars were made by us until we sold the company to SolidProfessor last year. So if John's voice sounds familiar, now you know why! 😉
@francoislamoureux1119 Жыл бұрын
glad i watched until the end, the critical depths checkbox will save me a lot of frustrations!
@ehsanamini5396 Жыл бұрын
Thank you so much ❤
@ipadize Жыл бұрын
1:15:00 i would love to see the ability to only recalculate the leads and connection paths
@ipadize Жыл бұрын
12:30 why would i need to ramp in in this example? Looks to me like it could be entered from the outside.
@themcamnw Жыл бұрын
Hi @ipadize! In this example, we're using the stock option, which limits the containment option to "stay inside". You can get around that by using a larger containment boundary, but we were trying to show the difference in helical entry here, so that would defeat the point to come in from the outside. But yes in this type of scenario, I would probably try to overdraw the containment and give myself enough room to enter from the side if possible. Thanks for the question!
@mennoschuil5516 Жыл бұрын
Thank you so much!
@hichamelmoutawakil7617 Жыл бұрын
THANKS
@Profabdesigns Жыл бұрын
You know what’s really helpful, is to slow down when making this tutorial so others can see what your clicking on and where, in order to understand what you are doing. Not everyone is a Content expert like you, and some of us are playing catch-up to current versions of MCX like myself. If you want us to watch your content, slow your roll. 😅
@themcamnw Жыл бұрын
Thank you for your feedback! We'll be sure to take it slower with our clicking in our future videos 👍
@faroukmastercam4395 Жыл бұрын
Thank you for your time ⏲️ it was very helpful 😊
@faroukmastercam4395 Жыл бұрын
Thank you
@stephencarter3713 Жыл бұрын
Awesome 👍,
@9955CAM8 Жыл бұрын
AWESOME
@JonBanquer Жыл бұрын
Massive improvement at 31:33
@D4ofusc Жыл бұрын
this is a great feature. does it work if you have lathe toolpaths in a different machine group as well?
@user-gx5pz5qy9m Жыл бұрын
Great addition, very useful.
@FelixT370 Жыл бұрын
Amazing! B-axis Toolpath
@mennoschuil5516 Жыл бұрын
Thank you so much!
@kendo3145 Жыл бұрын
I've been using this for years.
@hichamelmoutawakil7617 Жыл бұрын
Thanks
@csheadtrip Жыл бұрын
John Stauffer for President!
@GB-mq7gi Жыл бұрын
Nice, love that it follows the current wcs.
@policebox1092 Жыл бұрын
Awesome
@user-gp7bp7oq5w Жыл бұрын
Nice job
@user-gp7bp7oq5w Жыл бұрын
Great lesson thank you. Go Northwest!
@dorothylehner Жыл бұрын
Promo-SM
@rajasekaran2251 Жыл бұрын
Super
@faroukmastercam4395 Жыл бұрын
Thank you for this information can you make a detailed video for each plane auto created by mastercam in mill turn environment 😀.
@garrettdias1864 Жыл бұрын
This is one of the most helpful Mastercam videos on KZfaq.
@9955CAM8 Жыл бұрын
awesome
@cncmanufacturingptyltd51892 жыл бұрын
Fantastic thank you
@hamzaabdtouirsi85972 жыл бұрын
can send you the file
@joesebalj19622 жыл бұрын
Hi I have a question on solid how to blank out a hole in a slot. I can send you the file
@themcamnw2 жыл бұрын
Hi Joe, Can you explain a bit more what you mean by "blank out"?
@joesebalj19622 жыл бұрын
@@themcamnw I machine mold cavities. In some cases the water line goes partially trough a pocket for cooling. Most of the pockets are machine with surfacing so i need to create a surface on the partial water line. It can be a bit of a pain. I was told that you can go into modify and remove the geometry. Also I was told that there is a way that you can bring the solid work info into the master cam then go into solids and turn off the specific future. I am running master cam 2022. I not sure if can send you the solid file i am talking abot
@ipadize2 жыл бұрын
@@joesebalj1962 you can try to delete the pocket/hole and see if it works for your part (make a copy of the original before)
@mastercamstrong44392 жыл бұрын
고마워요♡
@DatNguyen-pf7vg2 жыл бұрын
Thanks
@garrettdias18643 жыл бұрын
Amazing video, Jon. Great insight.
@hienaz7233 жыл бұрын
What if my solid extension is parasolid. ? Is that still know in feature history ?
@themcamnw2 жыл бұрын
Hi Hein AZ, No, you would not see the feature history, as Parasolid file types come in as "dumb" solids (a solid body without any feature definition or history). However, any additional modeling done in Mastercam to the model would have history. I hope this answers your question!
@garrettdias18643 жыл бұрын
Super excited about everything new in 2022. Fantastic video, John.