Please ensure when you stretch the spring you stretch it in the centre where it looks compressed. If you stretch at the bottom the spring will push against the case when it is put back together if this occurs just use side cutters to clip of a couple of coils on the bottom😊
@WiliamBennettwildarbennettАй бұрын
Well always heard necessity was the mother of invention, and inspiration is the father of industry. So you have got yourself awesome start.
@WiliamBennettwildarbennettАй бұрын
I wished id found your video about 6 months ago. I do locksmith work for a property manager and they had this very problem and after disassembly and reassembly three times, i deemed it as irreparable and Replaced with a new one. Well now I've got the answer. And learning another great skill. Thank You
@locksmithinginnovation11Ай бұрын
Thank William more videos coming
@fredthomke9257Ай бұрын
You, sir, are a genius! I've been fighting TWO of these BE365 locks for two years. I've repositioned the spring at least 3 times in each one, only to have to go back in 6-8 months later and reposition it again. But your "S T R E T C H the spring" trick is the real deal!! I immediately hear a much more solid engagement of the assembly when it's triggered now! Thank you, THANK YOU!!
@locksmithinginnovation11Ай бұрын
Thanks it took me a while to think of the science and the real issue
@drewinstallshardwareАй бұрын
Keep making videos! I enjoy them. 😎
@locksmithinginnovation11Ай бұрын
Thank You got some good ones comingup
@johnholding107Ай бұрын
Under rated channel. I Enjoy your videos.
@locksmithinginnovation11Ай бұрын
Thank You more to come
@User-bq4qm2 ай бұрын
Yes, We rekey a lot of these. I would buy it
@locksmithinginnovation113 ай бұрын
Good Day shortly after posting this video X Tool is promoting its new F1 Ultra if you watch the videos you will see that it will be amazing with there conveyor system and camera, if you deposit 100 dollars before 28th May 2024 you can save 1,000.00 dollars or more. Check It Out
@illdilli4 ай бұрын
Great to see you back again! Always enjoy watching your videos. Thanks for sharing.
@locksmithinginnovation114 ай бұрын
Thanks Looking forward to doing More
@ChaseLocksmith4 ай бұрын
Great video, I was planning on ordering one this week anyways but this video reassured me about the keys
@locksmithinginnovation114 ай бұрын
Thanks How are you doing have seen you in a while
@ChaseLocksmith4 ай бұрын
Doing well, things are steady up here
@jaybig3605 ай бұрын
Thanks for sharing this sir
@smartcarkeys6 ай бұрын
Jeff Sir Thank you for the videos all of your techniques helps us Save time and being efficient in our trade🙏
@smartcarkeys6 ай бұрын
Thank you teaching us with your expertise, it is a pleasure working under your supervision 🙏🙏
@lisamcintyre96926 ай бұрын
You're a true craftsman, thanks for sharing
@lisamcintyre96926 ай бұрын
Thanks for sharing all your knowledge 😊
@ryanjohn50236 ай бұрын
Good video Jeff!
@ryanjohn50236 ай бұрын
Good video Jeff!
@ryanjohn50236 ай бұрын
Nice pinning mat . Good video buddy
@smartcarkeys8 ай бұрын
Thanks Jeff Sir Great video 🤙
@lisamcintyre96928 ай бұрын
Thanks Jeff great video
@shieldcracker11 ай бұрын
This is a great improvement on the tool.! Might it be easier to split the hinges and install both halves, then roll the door in and install the hinge pins?
@locksmithinginnovation11Ай бұрын
Most hinges we use in the industry for commercial use are NRP Non Removal Pin
@jamesarnold9296 Жыл бұрын
Thanks Jeff for the tip. I'm installing two of them. I know how to fix it the problem.
@DHackSecurity Жыл бұрын
Hey Jeff, thanks for the video. I'm the french guys who find this hack :). I agree with you about Allegion noticing sales reps ! when you get the zip tie out, just pivot it side to side and pulling it gently, this way, the zip tie will not let pieces in the lock. Keep posting videos !
@RaulRodriguez-fj4mo Жыл бұрын
Happy to have found you're KZfaq, love the magneto idea!
@Rockenstein68 Жыл бұрын
Can you JB weld the drain hole closed?
@MrAfx34 Жыл бұрын
Oh my God that is genius! I'm going out right now and buying a piece of clear PVC and a bearing, thank you so much that is super helpful! Holy hell I can't believe it was that easy! I have been trying to hold them together by pinching them and turning them back and forth and they like to get caught in there and jam up! I work for Pop-A-Lock here in Jacksonville Florida and I will spread the word! You now have a new subscriber!
@kevinwitt8827 Жыл бұрын
Keep the videos coming! These are very helpful tips, especially for newer locksmiths. Thank you!
@kevinwitt8827 Жыл бұрын
Fantastic tips! Thank you for sharing with us!
@geraldskinner63 Жыл бұрын
Thanks Coach! I am on my third year of Locksmithing and know all to well those stubborn Schlage cylinders. I will try this technique next time for sure.
@geraldskinner63 Жыл бұрын
This is absolutely amazing! Thanks for sharing! Keep working hard and stay safe!
@charlessims1076 Жыл бұрын
Just stumbled across your video today, and I have to say, absolute brilliance! I'm a new locksmith, and these types of tips and tricks from Experienced locksmiths like yourself is greatly appreciated. Kudo's Sir, and thank you kindly for this video!
@locksmithinginnovation11 Жыл бұрын
Thank You I have had to take a break due to personal reasons but hoping to get more out in the new year I have more great content coming
@samxu1467 Жыл бұрын
My approach to this : Method one, use lishi sc4 pick to pick it and poke the hole to take it off from the door, the lishi act like a tension wrench. Method two, if no lishi sc4, normal way to pick it and use a sc1 key blank cut to 99999 to insert after pick and use as a tension wrench.
@kellyproctor8472 Жыл бұрын
That’s a fantastic hack. Great meeting you today.
@locksmithinginnovation11 Жыл бұрын
Was great to meet you love your Locksmithing Van probably everybody's dream van
@pouncerminned863 Жыл бұрын
I’m interested in this project. Are you still around and alive and well??
@pouncerminned863 Жыл бұрын
Can I buy one of these?
@Chirael Жыл бұрын
Awesome, great content and innovation here; I love hearing about your experimentation and thought processes! I’m definitely going to have to check out all your other videos, especially #12 so I can see why you keep 6 SmartKey cores like you showed at 9:45 (I know it’s for the 6 depths, maybe it’s to double check your image depth guesses?). Re the Kwikset Lishi cutter from Red Team Tools you mentioned at 12:39, I’ve heard it’s “under development” so they have every intention of eventually coming out with one… but they also don’t have a specific timeline for that. In the meantime there’s an acceptable substitute if you look up ProxLock here on KZfaq or eBay. It’s an inferior design because the clipper rubs against the guide but it’s an acceptable flaw at least until Deviant/RTT come out with Kwikset guides. Thanks again for making great videos! 😊🙏
@Chirael Жыл бұрын
Nicely done, depends on the door frame being in the right place but still pretty useful in many circumstances. Nice work and thanks for sharing this 😊🙏
@pouncerminned8632 жыл бұрын
please continue to make videos!
@pouncerminned8632 жыл бұрын
great video, thanks for sharing. I am a newer locksmith and have never rekeyed honda high security yet, but I have cut plenty of keys. However, what wafer goes into what chamber? I see you have the wafers, but how do you read the wafer positions on these? Where does track A and B go?
@sonialavina86022 жыл бұрын
Great video. Which is the safest type of keypad lock that cannot be picked and which is recommended for absentee owners who do not have a key keeper in the area to see when the battery is running low? How would you compare the Schalage BE 365 vs the wifi lock BE489WB as far as safety, reliability (not malfunctioning)?
@stanleymackintosh32292 жыл бұрын
Great tool
@locksmithinginnovation112 жыл бұрын
Best Yet Video 20 Lishi Accessory To pick these loc ks
@locksmithinginnovation112 жыл бұрын
Last night I had a lock out only door in was A Schlage BE 365 last night tried to pick with my Cronos hand picks BUT MY LISHI ACCESSORY WORKED WAS AMAZING
@shieldcracker2 жыл бұрын
Mortise lock case. I consult the part list when in doubt, slang in technical communication is unacceptable. How would you regard doctors in Dallas naming medical stuff one way and doctors in NY naming the same stuff another way....
@shieldcracker2 жыл бұрын
Very clever ideas. I don't do much egress hdw anymore but now this is on my bucket list since this could be used for door closers and mag locks.
@LeeRiverGuy2 жыл бұрын
Where did you get your Locktech?
@denmanlocksmithing47962 жыл бұрын
First tool I believe would be a type of puller either core or key The second resembles followers of some type
@illdilli2 жыл бұрын
To your credit you did successfully show me how to use the Honda roll pin kit. 📌 I might have got lucky though the pin came out like butter.
@locksmithinginnovation112 жыл бұрын
If you don't get the roll pin out the last method is to get the shear off bolts out and the punch always works and yes the roll pin fell out on the Honda we where working on this has actually happened a couple of times since for me. You should check out my new Lishi Accessory Video 20
@locksmithinginnovation112 жыл бұрын
The little piece of plastic worked its way clear thus I never too k the lock of the door lock is working fine.