How would I convert an existing solar garden figurine into a battery operated unit?? I brought it inside my house and do not have any way to charge the solar panel.
@VestigialVoiceКүн бұрын
@@marielevin6001 really good question! You can take out the lithium / metal hydride battery and replace it with a conventional battery. It will often glow brighter than with solar, however, expect the battery to only last about 1 week, at most.
@stuartstephens45384 күн бұрын
It happens about 2/3 rds of the time the time, how many times does an average person replace the CD player in their car??
@kittydaddy20234 күн бұрын
I did it. I let it get that far. That's why I'm here. Going straight to the saw, thanks.
@VestigialVoice4 күн бұрын
@@kittydaddy2023 haha, get after it 💯
@kittydaddy20234 күн бұрын
@@VestigialVoice I found the brand new hoses that didn't get installed on my washer I bought 7 years ago, so the hoses on there are probably 20 years old.
@kittydaddy2023Күн бұрын
@@VestigialVoice I'm ebarrassed to say it was the white vinegar and baking soda that did the real work.
@VestigialVoiceКүн бұрын
@@kittydaddy2023 Way to go!!
@ontimereporting5 күн бұрын
My replacement battery is a 9JRV0 and it did not come with a cable because the Alienware cable is attached to the motherboard. How do I go about removing the cable from the old battery? Do I just pull it?
@TeresaThompson-yq6sp10 күн бұрын
I have this exact same watch. How much is it worth?
@VestigialVoice10 күн бұрын
@@TeresaThompson-yq6sp oh really?? That is AWESOME!! Price on vintage items is so subjective, but in good condition, I value this at $125. Now I performed a showroom polish and added a sapphire glass, so I'd price it at $200, as it is now one-of-a-kind. Thank you for the comment, I hope you are still wearing it 🔥
@kelsworthy14 күн бұрын
You know it’s only a picnic table!! Great videos !
@toto07308116 күн бұрын
My cd player disk is not rotating
@RGL.77717 күн бұрын
lol I took mine apart didn't see any issues from there, plugged it in to see if the issue would occur; well it did so then I just blew in to the port and fixed it... at least I didn't have solder :)
@Kitsunebyanothername19 күн бұрын
I have the MiniDisc version of this, and the CD changer has issues where it only reads some discs but not others. I'm definitely going to follow your video and try to clean the laser. Thanks!
@rickbowrosen238419 күн бұрын
You ARE THE BEST ❤❤😅😂😢😂😮
@kimallen913023 күн бұрын
I understand why it cost so much for stone restoration!
@VestigialVoice23 күн бұрын
@@kimallen9130 haha, ya know, the same thought crossed my mind during this process as precious hours ticked by 🤣
@SelmOfk25 күн бұрын
Thanks man i fixed it with alcohol method thank you very much ❤
@VestigialVoice25 күн бұрын
@@SelmOfk That's wonderful 👏
@gamingwithtonybaloney5824Ай бұрын
My anxiety when u took the screen off📈📈📈📈📈
@planwithmarisolАй бұрын
Thank you so much!
@xiraboltАй бұрын
Good stuff. Mine didn't have connection issues, but the screws had loosened up. I wasn't aware of the third screw under the insulator.
@amc31bАй бұрын
In order for ATO to look nice, you need to apply 1 heavy coat by wiping it on in one direction only. The back and forth strokes you did will make it look splotchy and uneven.
@TheHitDatАй бұрын
If these radios work then they paid for a lifetime subscription the reason I know I have a pioneer inno radio that I don’t pay for
@xiondiscАй бұрын
Does anyone know what could be causing my Dolby surround to not work anymore? The switch on the headset and the button on the mixamp does nothing. I can open it up again, but I don't know which side is the culprit or what to even test for.
@RoughRaiders13Ай бұрын
Never EVER use a jack alone to support the weight of a vehicle. The seal on a hydraulic jack piston can blow out at any time. Jacks are for lifting and lowering vehicles not for supporting weight. That's what jack stands are for. Don't find out the hard way by dropping your vehicle on its rotors or even worse dropping the vehicle on yourself. It's a very important thing to teach your kids as well.
@dreameaterarts2946Ай бұрын
Can you use the polish without the auto scrubber.Is there another method? Great job btw
@Storm-s4uАй бұрын
GREAT VIDEO THANKS MUCH!
@reginaldhall5471Ай бұрын
I have a Onkyo TX NR7100 and unable to access the 2.network or 3.Bluetooth menus under Hardware setup nor am I able to access the 3.firmware update or 4.initial menus under Miscellaneous setup. Any ideas how to correct this problem.
@donrooker2053Ай бұрын
2024 and this video is still relevant. Only took me 3min start to finish. Thx for the tip.
@VestigialVoiceАй бұрын
@@donrooker2053 people other than me still have aftermarket CD players? Awesome! 👍
@vaxamasАй бұрын
Thanks
@kebo57Ай бұрын
"Solubolize"??? That's a new one for this 67yr old fart!
@Ignatius_rileyАй бұрын
Algorithm post
@crosslake6Ай бұрын
How does it work on auto headlights?
@VestigialVoiceАй бұрын
@@crosslake6 it will work okay in a pinch, but you'd really be better off purchasing a graduated kit which will eliminate the heavy damage all the way up to the fine scratches. Typically, they will also provide a UV protectant spray which will giving you a much more lasting effect. Good question ✅️
@julianneedsblood7091Ай бұрын
Removing the wireless lan got me
@dlang4dАй бұрын
Try some PB Blaster spray. Mine came off after sitting for a few minutes with the spray.
@VestigialVoiceАй бұрын
@@dlang4d nice!!
@GreatdadАй бұрын
Same problem! If I move my boom, it disconnects. I just got it. Should I send back?
@VestigialVoiceАй бұрын
@@Greatdad if you just got it, I would exchange it, yes 👍
@GreatdadАй бұрын
thanks, ‘cause I’m not getting out that soldering iron to do surgery!
@viviruiz4053Ай бұрын
Thanks so much! Could definitely do it myself if I wasn’t 8 months pregnant 😏
@VestigialVoiceАй бұрын
@@viviruiz4053 your van can probably wait a couple months for you 😁
@betsyjarboe9968Ай бұрын
Do you leave the light on all the time ?
@VestigialVoiceАй бұрын
@@betsyjarboe9968 I do. The light sensor turns the bulb off during daytime hours.
@B0Xi96Ай бұрын
Does it work on the A20?
@bhavanimaАй бұрын
Good video
@XottaBbI4._D76Ай бұрын
Well done
@VestigialVoiceАй бұрын
@@XottaBbI4._D76 thank you, my friend 😁
@XottaBbI4._D76Ай бұрын
Good job
@frankenbeans3797Ай бұрын
I thought a blizzard was a lot worse than that
@Lil_DARKILLAАй бұрын
Cool bro!
@VestigialVoiceАй бұрын
@@Lil_DARKILLA haha, thanks, my friend 😁
@warrenpeas2 ай бұрын
but how do you open the gen 1 oontz angle?
@bethbartlett56922 ай бұрын
Ya got to go all the way to the 8000 grit and a buffing pad suede pad. You must be or have a strong Virgo influence, "Craftsmanship"! I share the trait, pristine perfection feels great! Love it! You go!!!
@roythomasful2 ай бұрын
Watch your words! Oxides are inevitable. We cannot live without God given oxygen.
@patreid46152 ай бұрын
I use this product and it’s just “so so” but will continue to do it because none of them are that great but thank you so much for your video. It made me laugh. I really enjoyed it.
@shay11162 ай бұрын
I have a pair of VR975s and they keep blowing the fuses. Any idea as to what be causing that?
@name-ce7sn2 ай бұрын
Dows it make the floor slippery though?
@VestigialVoice2 ай бұрын
Good question, they do not become slippery 👍
@mhegyike2 ай бұрын
Many many thanks! After a year finally u fixed my problem!!!!!
@VestigialVoice2 ай бұрын
That's wonderful, thank you for sharing!
@saadomar11012 ай бұрын
what the hell, I just opened up TX sr607 and found a hdmi port on the controller board but no hdmi cable attached to it.. I got it used from someone and the guy wasn't even using hdmi ports. all my INs and OUT is not working for HDMI currently,,
@VestigialVoice2 ай бұрын
Did your HDMI ports work after you plugged in the internal HDMI cable?
@saadomar11012 ай бұрын
@@VestigialVoice hey guess what,. It was dirt cheap and there wasn't even a point in trying more.. cause the HDMI board was missing components on it :)))
@lumity2382 ай бұрын
My man would never mop a floor 😢
@scotto38262 ай бұрын
Get rid of the gate valves, they are a terrible design and prone to failure due to corrosion and mineral deposits. The stem in the valve rots and will snap one day when you try to shut it off. Or, you might be able to shut it off, then it snaps when you turn it back on. I know this from personal experience. Replace them with 1/4 turn ball valves.
@VestigialVoice2 ай бұрын
Yes, that's a common, but true comment. I don't believe they even pass code any more. Not today, not tomorrow, but eventually, I'll have them all swapped out. Take care, scott.