Question, was this only for the recording or also used for the in house mixing?
@alexleebataller2 минут бұрын
@@itsdycmusic it’s mainly optimized for house or live stream mixing!
@pastoraronmartinez4714 күн бұрын
I just bought it, any idea to send it to live stream?
@alexleebataller14 күн бұрын
@@pastoraronmartinez47 thank you so much! Yes, you can use this for a live stream set up! All you would need to do is set up an extra output on your Wing and plug it into your streaming hardware. If you have anymore questions, email me! [email protected]
@BenBueno-vy3cs20 күн бұрын
Thank you so much for this content!!
@frmthedenАй бұрын
I have a question for you, did you run into any issues updating from 1.12ish to 2.0? I looking for resources on how to back up our routing and everything in case something happens. Anything I should be thinking about going from 1.12 to 2.0 should I go to 2.1?
@alexleebataller3 күн бұрын
The library and FX setting recall has been entirely reworked. I would save any main effects or routing as a back up on another drive, but your scenes and library shouldn't be entirely wiped.
@pitchfordproductionsАй бұрын
The mix sounds fantastic and you've definitely given me a couple of ideas to try on my Wing! Also, having Brady on your staff I would imagine helps you tremendously in terms of making sure everything sounds good at the source. One thing I will point out (and there's a KZfaqr by the name of Guillaume Lortie that explores this more in depth) is that the Pitch Fix plugin doesn't work the way that traditional AutoTune works (that'd be too convenient lol). By highlighting a note red, Pitch Fix does not pull a note to the nearest available note on one side of it or the other like AutoTune would. Instead, you're telling Pitch Fix which notes to pull to the grid and which ones to simply ignore (i.e. the note highlighted red would not be corrected at all). Ideally you would want to run Pitch Fix "chromatic" where it would pull everything to the nearest note. You would highlight a note red if there's a note that needs to be ignored because it's consistently doing more harm than good.
@joeledwards8983Ай бұрын
wow....just wow!
@amarmahapatra7046Ай бұрын
Thanks you sir
@joellouisfireАй бұрын
What IEMs are you using to mix?
@alexleebatallerАй бұрын
KZ Z10 Pro, better than molds I’ve used. I have like 5 pair
@joellouisfireАй бұрын
@alexleebataller no way haha, that's awesome. Gotta give them a try, thank you
@joellouisfireАй бұрын
@alexleebataller btw, would you consider this the broadcast or FOH mix? Curious as to how this template would translate on mains
@TinoSchulz1990Ай бұрын
Why do people dislike the old LS-9 ? Yeah, the EQs were not the best, but it's a workable console. Mixed a few shows for (to me unknown) bands successfully and got great compliments.
@FiretracksАй бұрын
Love how y’all got it right at the source! Can’t polish✨a turd!💩
@andreinastase1932Ай бұрын
nice band you have🥴 love your mixing style. hello from a sound engineer in Romania💪🏻
@donaldburns4462Ай бұрын
Wow! Impressive
@fredbob75212 ай бұрын
Bravo. Good job... Beau boulot !!!
@TimmyP19552 ай бұрын
Recommend a big cut in the kick at 170, and a cut at 310 on the snare. And reduce your mic volume (as compared to the tracks).
@TGSounds-qd5cq2 ай бұрын
Love the Snare Man!
@alexleebataller2 ай бұрын
Thank you!
@meistudiosspecialevents69472 ай бұрын
Had to come back to this video... When you do the drum squash bus, did you send pre or post sends of the drums to it? Just love your posts.
@alexleebataller2 ай бұрын
Thank you! Post fader sends to the Drum Smash bus. 🤘🏻
@meistudiosspecialevents69472 ай бұрын
@@alexleebataller thanks man! lol smash not squash... thats a vegetable.
@andreasfasekasch66332 ай бұрын
nice work. But are you sure that the console doesn't compensate processing delay? I'm sure the X32 don't but the WING do ;)
@alexleebataller2 ай бұрын
Unfortunately after testing, I’ve found there is no delay compensation on FX inserts.
@christembassyalvintexas2562 ай бұрын
I do not see a channel for Hi Hat in the template? I also tried to use this as a template
@K3dev2 ай бұрын
The acoustic guitar sounds amazing!
@alexleebataller2 ай бұрын
Thank you!
@Mheers2 ай бұрын
Great video and mix! I saw you mention that this is for FOH. What do you do for your broadcast mix? Do you have another Wing or do you just mix out from FOH?
@alexleebataller2 ай бұрын
I normally use a separate spilt of the inputs into another mixing setup. Usually a Protools session.
@joshuaperry27892 ай бұрын
You WANT the microphone to touch your lips? 🤢 I’m sure you know how much of other people’s spit gets trapped in those things 🤢🤢🤢
@alexleebataller2 ай бұрын
Ha! You may be right, but it’s mostly a figure of speech. However we do disinfect our mics so they are pretty germ free. 😂
@JoeriC2 ай бұрын
You didn’t selected the drum Channels to The DCA Group of drums..
@alexleebataller2 ай бұрын
The drums are being sent to a group and the group is in the DCA. 🤘🏻
@tekis02 ай бұрын
The bass drum mics sounded like they might be "out of phase." Maybe check the polarity? Sounding very good otherwise!
@RevJorgeDiaz2 ай бұрын
This is a really good mix! Ona console that’s 12+ years old. Punchy, clear, balanced… great job! Wonder if you could do a video on using an x32 Rack as a monitor console with an x32 running FOH. Because we run stereo in ears for our vocalist, we can’t use parallel compression on our drums. My thought is to use a Dante card on the Rack and feed it the inputs from the FOH x32. Thanks for the great content!
@juanestevez80472 ай бұрын
If you can mount the rack by the stage box, you’d be able to save money by getting a splitter snake. Otherwise, if you are ready for Dante, then, by all means, go for it.
@RevJorgeDiaz2 ай бұрын
@@juanestevez8047 good recommendation. The rack is 5 feet away from our stage box.
@kreamztv7092 ай бұрын
Question.about time/latency issue i saw that ur only delaying some of the channels that corelated ( kick in/out)to the ones that u inserted (fxracks).so how bout the other instruments isnt that all corelated.ex kick n bass when u delay ur kick isnt that gonna make the bass off the grid ?
@alexleebataller2 ай бұрын
Because it’s not sharing waveforms of the same input (ie. overheads picking up snare), you’re in the clear. It won’t introduce anymore issues than are already inherently there to begin with. We’re talking about less than a millisecond of time difference. Which is enough to tell on the drum channels, but not everything else. Hope that makes sense!
@henrysalinas67513 ай бұрын
Quick question, how many subgroups are you using. I noticed on the X32 it said "on" for every channel and I know that those are subgroups. I currently only use 2 subgroups, vocals and band, but what are you using. I'm always open to learning from people and your video was great so I appreciate it.
@alexleebataller3 ай бұрын
I’m only using one stereo subgroup (bus 9/10), which is the Drum Dry group. I wanted all of the drum inputs set at unity passing into the bus so I can time align the two stereo drum busses. Everything else is a Post-Fader Bus, therefore I can control the send level.
@henrysalinas67513 ай бұрын
@@alexleebataller Oh. That makes sense. Thank you
@illreel51693 ай бұрын
I always double mono pan on high demand tracks, I'm so happy this unit had motorized faders
@doubleaceprod3 ай бұрын
What software are you using to mix on your computer?
@alexleebataller3 ай бұрын
X32 Edit
@doubleaceprod3 ай бұрын
@@alexleebataller Is it only for post edit? Or can you use it live? Can you use your VST's in it?
@alexleebataller3 ай бұрын
@@doubleaceprod it doesn’t host or process any audio from your computer, it is simply a companion controller app for an X32 console.
@AKSKMY3 ай бұрын
Question. Why is there left and right for the EG? Isn't it usually mono? Also the Side chain key source is interesting! Also for compression how to know what attack and release usually to set it to?
@alexleebataller3 ай бұрын
Both of our EG sources are stereo lines, this gives a much wider space for the guitars wet effects. Compression settings all depend on the source! Faster compression settings “tame” while slower settings give more initial room for “punch”.
@AKSKMY3 ай бұрын
@@alexleebataller I see interesting. I'm used to usually miking up the EG's amp using a single SM57 else is a mono out from the guitarist's pedal board direct out.
@emmanuelojie98143 ай бұрын
Is the Vox Comp a Sub-group or Mix-bus ?
@alexleebataller3 ай бұрын
It can be treated as a Sub-group or a Post Fader bus. I have it as a Post Fader Bus on Bus 14 as it shares the block setting of bus 13 which is the Drum Verb Post Fader Bus.
@emmanuelojie98143 ай бұрын
@@alexleebataller I would remove all my Vocals off the LR and push it into that Vox comp bus correct ?
@alexleebataller3 ай бұрын
@@emmanuelojie9814 that is correct, then send Vox Comp to LR
@emmanuelojie98143 ай бұрын
@@alexleebataller perfect thanks
@emmanuelojie98143 ай бұрын
@@alexleebataller great video, it just broadened my knowledge.
@abishaibenny21313 ай бұрын
X32 mix down was awsome
@alexleebataller3 ай бұрын
Thank you!
@Gershy133 ай бұрын
Would be an interesting video if you built a mix on the Wing, and then use the same tracks and try and recreate it the best you can on the x32. Then at the end do a comparison of the two mixes, just to show how much the more powerful wing and its emulations can make a difference. It's also an interesting video for people who want to upgrade to the wing.
@alexleebataller3 ай бұрын
I’d be interested to hear those differences side by side!
@MIRAOfficial13 ай бұрын
How do you determine how much delay compensation you need? Is there a guide line?
@alexleebataller3 ай бұрын
I’m not an expert on testing delay compensation but I’ve found a quick way to check round trip times and anything in between. You just need your console and a DAW. First, create two identical audio tracks with a simple sine wave and loop the audio section. Next, route them down two channels on your console and flip polarity on the second channel and set both volumes to the same. You should hear them cancel each other out and then no longer hear each of them. Next you can play around with adding different effects inserted onto the second channel and then engage and increase delay on the first channel until you start to phase them out again. Not all effects racks are created equal. You can also calculate the difference of channel to bus and even round trip latency if you add an interface and a few cables. This is an EXTENSIVE subject and there are trained professionals that handle stuff like this all the time who know way more than me. There’s also measurement applications like Smaart that you can look into. Hope this helps!
@kreamztv7092 ай бұрын
Use smaart on ur final outs.toggle insert (fxrack) on/of take a look at live ir or just simply do find delay mode n look at the time diff (ms)
@MaJenta4HISglory3 ай бұрын
Let’s go! So proud of
@carolafon86473 ай бұрын
Merci très bon tutoriel
@allenpendleton87673 ай бұрын
It should be an M32 not x32. I think the x32 is not even produced anymore.
@alexleebataller3 ай бұрын
All of this will work on the M32 🤘🏻
@harleyrowellmusic3 ай бұрын
Let’s gooo boss
@zaharishtonov3 ай бұрын
Your Behringer Wing 2.0 video was really great! We are still on the X32, but looking into eventually transitioning to the Wing! Making much more sense and sounding much better too. Thanks for these walkthroughs!
@alexleebataller3 ай бұрын
That's awesome to hear! Glad you're enjoying the content. 🤘
@kojoXAppau3 ай бұрын
This is superb,God bless you
@alexleebataller3 ай бұрын
Thanks!
@zechpatrick3 ай бұрын
your mix is 🔥🔥🔥
@alexleebataller3 ай бұрын
Thank you so much!
@zechpatrick3 ай бұрын
@@alexleebataller ❤
@petterrong15903 ай бұрын
17:39 Wait, what? It does true stereo panning as default? That's actually neat!
@christothegreat13 ай бұрын
Like that song a lot! Singer has same last name as you! Sister? Wife? kzfaq.info/get/bejne/qcmVptWq0a_DiIU.html
@jordangilchrist20963 ай бұрын
can you give frequency that y'all tune your drums to and what heads y'all are using?
@alexleebataller3 ай бұрын
We don’t tune to a frequency, just a good balance of tone and resonance while being pitch matched around the drum. Kick - Evan’s EMAD 2 Snare - Powerstroke P4 Coated Toms - Emperor Coated
@user-gu1wx5np8g3 ай бұрын
в мене х32, уявляю що берин в віні наворотили!
@hamatvk21413 ай бұрын
Lee, I was interested to see you manually adding delay for insert compensation...i thought the wing (and other digital consoles) automatically had delay compensation built in?
@alexleebataller3 ай бұрын
After some testing with the console, it doesn’t have any sort of delay compensation. I’ve been thinking of making a video of some more testing.
@Kgn_prodution3 ай бұрын
awesome i need the song thanks
@alexleebataller3 ай бұрын
Tracks available for free on my website!
@fatcatnordleadx3 ай бұрын
i got the waves LV1 , now i feel like getting the WIng. never expect so much plugins as compared to my M32s
@alexleebataller3 ай бұрын
Oh this wasn’t even the half of them, there’s several EQ and Compression emulations all built in to each channel. It’s a little absurd to have this much power.
@marcelobustos53283 ай бұрын
Lee, a huge thanks for this video! We recently purchased the Wing and have had some struggles with it but seeing this video and being able to get your template it will surely make our job a lot easier! Bless!