Пікірлер
@myhayden 36 минут бұрын
Keep going Victoria! So proud of you! - Jordan.
@shellyhansen5279 24 күн бұрын
I found that overlock takes a lot longer than using a serger. Although when I only had one serger and didn't want to change thread colors on my serger i use the overlock.
@ByTinymite 24 күн бұрын
That doesn’t surprise me. If you have one, then it is probably easier to use it for that instead of the overlock setting. However, as I do not have a serger, the overlock setting works really great for me. :)
@Colleen527 26 күн бұрын
Excuse me but where is the link for rotary blade for zig zag with 10 blades 5 zig zag Colleen
@ByTinymite 25 күн бұрын
Hello. I am sorry for the delay in getting back to you...it's been crazy! Anyway, I do apologize for failing to include the link. You can find the scalloped rotary cutter here: shorturl.at/PBWy5
@Pandidolod 28 күн бұрын
Woah I didn't think you were legally allowed to use that emergency alert sound
@ByTinymite 28 күн бұрын
I was not aware of this. I got the tone from Epidemic Sound, which gives license to use the music/tones, so I had not anticipated any other issue. I’ll look into it.
@Pandidolod 28 күн бұрын
@@ByTinymite oh I'm not being a narc. I was just surprised is all. I could be wrong. Maybe it's a different emergency alert that you can't use?
@ByTinymite 25 күн бұрын
Thank you for letting me know about this. I did some research, and there's a little bit of a gray area but not much. The tone I have used isn't the exact same tone. However, I think it would still violate the rule because someone could be confused...and it sounds like that is the main point of the rule. I will see if I can figure out how to edit it out. If not, I'll take it down.
@Pandidolod 25 күн бұрын
@@ByTinymite oh I doubt it's a big deal! The video was very nice and informative. :)
@ByTinymite 25 күн бұрын
@Pandidolod thank you :)
@woopsiedoopsie8961 Ай бұрын
Wow, very helpful, thanks a lot❤ I'll save it to my playlist to come back for some good tips.
@ByTinymite Ай бұрын
Yay! Thank you. I’m so glad you found it helpful 😊
@singmysong1167 Ай бұрын
I have an overcast foot on my Janome and didn't know what it was for! Now I need to figure out the purpose of the L-shaped metal thingy next to the additional feet.
@ByTinymite Ай бұрын
Oh I’m so glad now you know 😃 I’m sure that will be helpful. I have a few ideas about this L-shaped thing, but it’s hard to know without seeing it. Is it a maybe a seam jumper? Or maybe a seam guide? Or is it an actual preset foot? I’m so curious!
@singmysong1167 Ай бұрын
@@ByTinymite ...well it's next to the presser feet slotted in their appropriate spots, feet marked as A-B-C-D-E-G (no F). It has it's own slot on top, marked as L. It is L shaped, as I mentioned. 2 1/2 × 1 inch. I'll probably need to search for an old Janome manual online, to figure it out.
@ByTinymite Ай бұрын
@singmysong1167 Interesting. I have no idea what that is. I don’t have a Janome either, so mine aren’t labeled like that. Finding a manual sounds like the best idea. Good luck! Let me know if you find out. 😃
@TheLillypad1752 Ай бұрын
Like making my own! 11:01
@ByTinymite Ай бұрын
Just to clarify, do you mean making your own hemming tape? If so, that’s so cool! I’d love to know how…
@Gelb65 Ай бұрын
Fray Check will wash out. In some fabrics it will wash out after a few washings. In others it will last a little longer. It must be reapplied. I have found pinking an edge does not stop fraying. It may slow it. I did not know this but a pinked edge will let the fabric go around a corner like bias cut fabric. I appreciate your info. .
@ByTinymite Ай бұрын
Thank you for sharing your experience. Thankfully, I have not run into these issues myself, but it’s always great to know how things perform in other circumstances. I’m always glad to learn something new. Happy Sewing :)
@thesparrowsnest8343 Ай бұрын
Great video. I’ve been sewing for almost a decade but I still enjoyed this. I currently use 2 main machines; a Singer Stylist and a Juki TL 18. I use the Juki more but it’s straight stitch only so I still use my Singer for lighter materials and zigzag stitches. I liked this video and subscribed 😊
@ByTinymite Ай бұрын
That’s awesome! That’s kind of amazing that you have two. Thank you!
@thesparrowsnest8343 Ай бұрын
This is a fantastic video. I’ve used many of these techniques but I have also learned a few things. I think I have a scalloped blade for my rotary cutter but I have not used it. I lost my fray check a few months ago. My goal for today is to find it or buy a new bottle. Thanks for sharing.
@ByTinymite Ай бұрын
Thank you so much! I’m so glad you found it helpful. I hope you find your fray check! I’ve never lost mine, but I did run out of it in the middle of a project once without realizing it was nearly empty. That was so inconvenient 🤦🏻♀️ but not the worst thing ever haha.
@foxynannabev 2 ай бұрын
Thank you for doing this video 😁 I didn’t know the difference between a Overlocker, Serger & a Cover Machine 😢 now you’ve just made it a lot clearer for me (oh & I’m nearly 60 😳 & I’ve been sewing since I was 11 😮 so it’s a long time lol - where do the years go? 😢) subscribed to your channel & thanks again hun xx
@ByTinymite 2 ай бұрын
Thank you! I’m so glad you found it helpful. You’re most welcome. 💜 Wow…sewing since 11…impressive. I bet you know all sorts of tips! Happy Sewing 😊
@foxynannabev 2 ай бұрын
@@ByTinymite thanks hun & not really it’s just the years go by so quickly honestly it seems like 1 min I was ur age the next min I’m nearly 60 😳 it really does go so fast hun just ask ur Mam or Grandma 👵🏻 xxx
@xquizzeat8348 2 ай бұрын
Thank you for all the information you provided in this video!
@ByTinymite 2 ай бұрын
Aww thank you! I’m so glad that you found it helpful 😊