The mounting kit seems to have click to release type latch.. but the mda20 doesn't have that, it has vesa plate adapter and screw in place of the release button. Regarding the monitor, 27 inch isn't a problem.

On the arms, there will be a + - marking, in that you can insert an Allen key, and adjust the spring loaded screw, I think as you do do the - side, the arm will become lighter and you'll be able to move it up and down.

It's F-160.

Same as day 1. No degradation noted. 👍

We won't be lifting it, just moving to and fro and to the side. It's definitely less manoverable than a vacuum cleaner. I think it's meant to be like that. Like if we spend 5 seconds to do one swipe from wall to wall with a cordless vacuum, with this we'll be spending 30s to do the one swipe. The good thing is the floor will be 95 percent dry instantly.

It's not a vacuum, sorry. If you use this without vacuuming first, you'll end up unsatisfied and probably clogg the dirt water filter.

@@hometech4572 ok thank you

Here you go mate : a.aliexpress.com/_mKpnuYS Choose option D. They are sold together. Just a note the adapter laches at right angle, ie. If the bottle is facing down, the sprayer gun will be facing sideways, like an AK with side mag. But not a big problem for me. I think you can see that it the video as well.

@@hometech4572 ya noticed it, thanks for the update. one more thing, i spoke with a detailer and he said to use bowden's snow job foam wash, so that you dont have to do a hand wash again. Just spray it with the pressure washer, let is sit for 5 mins and spray with water. thats all,. it will remove all the dust and the contaminatioins with the foam. Try it and see to avoid hand wash what you are doing in the video. i dont like the right angle, got the bowden's snow canon which is fitting perfect, but that is expensive. still ok as it sits with proper straight position. I got it at 25% discount at repco. so bit ok. got it at 70$ something. thanks for the tip.

May be newer models works differently.

You have to loosen a screw that is in the arm socket, articulated, look for it and see what you can find.

Loosen the screw just right, then we'll be able to move the monitor up and down with a gentle push

Just bought it in temu

Yeah. I spent quite a lot of time getting it right, if you see my other video - Northbay AU dual arm setup, I first fix the arm to the display and then mount the arm to the pole. It's much easier that way.

@@hometech4572 I found out that the MDA protrudes beyond the desk (my desk is against the wall) so I bought 2 MSAs instead. Also the arms are not compatible with S series monitor, but only with P or U series. I use dual U2723QEs now.

Appreciate it!

Yes, they are safe to tilt. Pretty much every joint has freedom of movement, but need to push them a bit.

Upto 16 gb @1333mhz

I don't remember how much ram they've got. The laptop is just lying around. 🙂

I don't have any wobble problems for normal usage.

Here you go mate : a.aliexpress.com/_mKpnuYS Choose option D. They are sold together. Just a note the adapter laches at right angle, ie. If the bottle is facing down, the sprayer gun will be facing sideways, like an AK. But not a big problem for me. I think you can see that it the video as well.

Yeah. The instruction manual wasn't great. I did what i could do. Regarding the max length between the legs, its determined by the aluminium rod. Extended the aluminium rod to max, then do a trial fitting before locking the bridge screws, adjust as needed.

Sorry no idea. Better to find a friend who has a dual arm setup and do a trial before before buying

TCL phones are inexpensive. It it has served one year, just buy a new one. No point fixing things these days as the parts are becoming expensive

yes you can..watching the video, its sad his monitor has no DP.

I had a 27inch monitors on top, and 15.6 inch laptop. The laptop wouldn't go all the way back. It's mentioned in the end of the video. 😢

The name of the material that I used is unknown. Actually I bought a huge sofa recliner and it came as packaging material. I think it's called non woven fabric. Attaching a Amazon link for reference: www.amazon.com/gzqirun-Protection-Antifreeze-Blankets-Weather/dp/B09FKH8Z72

@@hometech4572 thnks bro it means a lot

I also found a better way to join them, nowadays I'm using iron box and paper to heat seal the non woven fabric instead of stitching

I also found a better way to join them, nowadays I'm using iron box and paper to heat seal the non woven fabric instead of stitching

@@hometech4572 ooh great

Always welcome

Idhar : a.aliexpress.com/_mKkbwKi

Hi. Yeah, it's about the adjustment of the weight of the monitor (how easy or difficult is it to lift up or push down with a single finger).. Ill explain with a example, Think of the counter balance as a spring loaded garage shutter. Garage shutter is about 100+kgs, yet we are able to lift it up and put it down easily because of the pre tensioned spring in them.

@@hometech4572 Ah nice, I was worried as I'm using a 34 ultra widescreen on this arm lol. I finally know now, thanks

Nice

a.aliexpress.com/_msvyMEE

This article has steps and also link to the tool that I used. www.ubackup.com/clone/clone-dual-boot-hard-drive.html

After fixing the displays, we cannot move the arms to completely interchange their places, the monitors will dash into each other. But I can recommend a solution: Each monitor has two HDMI inputs, so you can have 4 cables total, taking inputs from devices in any desired order.

You can press and hold the power button for like 5 seconds. It should boot up. There are some android standard recovery key combinations but we don't need that as long as the phone was working fine until recently.

Nah. I don't think so, haven't seen any screw threads on the gun.

Sorry this was bought from an international seller

Glad it was helpful!

Here you go mate : a.aliexpress.com/_mKpnuYS Choose option D. They are sold together. Just a note the adapter laches at right angle, ie. If the bottle is facing down, the sprayer gun will be facing sideways, like a bicycle handle. But not a big problem for me. I think you can see that it the video as well.

@@hometech4572 Hey thanks! I placed an order. Any recommendation for the foam liquid for car? Can I get them from bunnings?

@@skyfoxnz Good ones are not there in Bunnings. Ebay : Meguiar's gold class. www.ebay.com.au/itm/162024913773?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=FLSYwsE3RgS&sssrc=2349624&ssuid=fnpc4zncrjg&var=&widget_ver=artemis&media=COPY

@@skyfoxnz Great foam, but it doesn't have wax. You may need to apply some protector or polisher to create a layer.

Here you go mate : a.aliexpress.com/_mKpnuYS Choose option D. They are sold together. Just a note the adapter laches at right angle, ie. If the bottle is facing down, the sprayer gun will be facing sideways, like a bicycle handle. But not a big problem for me. I think you can see that it the video as well.

@@hometech4572easy way to fix the right angle problem is to buy the quick disconnect adapter. Thread both side in the click they together.

​@@Jay_2023hi, where to get the quick disconnect adapter. Any links pls